9 Mar
2021
9 Mar
'21
12:05 a.m.
Hi all
Using version 5.4.x here.
I save the registrations with use_domain 0 but I do use the domain module to do
some checks.
If I execute "kamctl ul" show I can see the registrations but if I execute
"kamctl ul show username" I get
"ERROR: domain unknown: use usernames with domain or set default domain in
SIP_DOMAIN"
I understand I should use domain in case I was using it in the usrloc module
but I'm not.
How can I tell kamctl not to ask for domain?
cheers,
Jonm
--
PekePBX, the multitenant PBX solution
https://pekepbx.com
9 Mar
9 Mar
9:32 a.m.
Hello,
the error message from kamctl, not from kamailio. You need to set
SIP_DOMAIN inside kamctlrc file or do: kamctl ul show username@domain,
where domain can be localhost or anything else. The kamctl is built that
way, is not really aware that the kamailio is multi-domain enabled or
not. Actually, kamailio still needs sip addresses with user@domain, just
ignores the domain for queries.
You can make kamctl to be more flexible here, it is a shell script, if
you provide a patch, can be merged. On the other hand, it might be
better to just go for kamcli, it is planned that at some point is going
to replace kamctl.
Cheers,
Daniel
On 09.03.21 00:05, Jon Bonilla (Manwe) wrote:
Hi all
Using version 5.4.x here.
I save the registrations with use_domain 0 but I do use the domain module to do
some checks.
If I execute "kamctl ul" show I can see the registrations but if I execute
"kamctl ul show username" I get
"ERROR: domain unknown: use usernames with domain or set default domain in
SIP_DOMAIN"
I understand I should use domain in case I was using it in the usrloc module
but I'm not.
How can I tell kamctl not to ask for domain?
cheers,
Jonm
--
PekePBX, the multitenant PBX solution
https://pekepbx.com
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
11:52 a.m.
El Tue, 9 Mar 2021 09:32:00 +0100
Daniel-Constantin Mierla <miconda(a)gmail.com> escribió:
Hello,
the error message from kamctl, not from kamailio. You need to set
SIP_DOMAIN inside kamctlrc file or do: kamctl ul show username@domain,
where domain can be localhost or anything else. The kamctl is built that
way, is not really aware that the kamailio is multi-domain enabled or
not. Actually, kamailio still needs sip addresses with user@domain, just
ignores the domain for queries.
If I use user@anydomain I always get
{
"jsonrpc": "2.0",
"error": {
"code": 500,
"message": "Domain not found"
},
"id": 3826
}
You can make kamctl to be more flexible here, it is a shell script, if
you provide a patch, can be merged. On the other hand, it might be
better to just go for kamcli, it is planned that at some point is going
to replace kamctl.
Will check. Will also try kamcli
--
PekePBX, the multitenant PBX solution
https://pekepbx.com
12:32 p.m.
The domain in the jsonrpc response refers to the location table --
somehow internally the name of the table storing the contacts is also
referred as domain. I just pushed a patch to add table to the response text.
Do you use save("location") and lookup("location") or another table
name? The kamctl uses "location", if you use something else, you need to
adjust kamctl.
Cheers,
Daniel
On 09.03.21 11:52, Jon Bonilla (Manwe) wrote:
El Tue, 9 Mar 2021 09:32:00 +0100
Daniel-Constantin Mierla <miconda(a)gmail.com> escribió:
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
Hello,
the error message from kamctl, not from kamailio. You need to set
SIP_DOMAIN inside kamctlrc file or do: kamctl ul show username@domain,
where domain can be localhost or anything else. The kamctl is built that
way, is not really aware that the kamailio is multi-domain enabled or
not. Actually, kamailio still needs sip addresses with user@domain, just
ignores the domain for queries.
If I use user@anydomain I always get
{
"jsonrpc": "2.0",
"error": {
"code": 500,
"message": "Domain not found"
},
"id": 3826
}
You can make kamctl to be more flexible here, it
is a shell script, if
you provide a patch, can be merged. On the other hand, it might be
better to just go for kamcli, it is planned that at some point is going
to replace kamctl.
Will check. Will also try kamcli
--
PekePBX, the multitenant PBX solution
https://pekepbx.com
3:29 p.m.
El Tue, 9 Mar 2021 12:32:19 +0100
Daniel-Constantin Mierla <miconda(a)gmail.com> escribió:
The domain in the jsonrpc response refers to the
location table --
somehow internally the name of the table storing the contacts is also
referred as domain. I just pushed a patch to add table to the response text.
Do you use save("location") and lookup("location") or another table
name? The kamctl uses "location", if you use something else, you need to
adjust kamctl.
Yes, my table name has kam_ prefix. I'm checking if I can export that and have
it read in kamctl somehow.
why is that the general ul show works without issues and the specific one needs
to know the table name?
--
PekePBX, the multitenant PBX solution
https://pekepbx.com
1152
days inactive
1153
days old
4 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Jon Bonilla (Manwe)