Please always CC the list. Read the admin guide or search through the mailing lists archives. Look for t_relay_to_udp, forward or similar functions.
If you gateway is running on IP 1.2.3.4 then you can use t_relay_to_udp("1.2.3.4");
http://iptel.org/ser/admin.html
Jan.
On 27-01 12:46, Raymond May wrote:
Jan, Sorry to bother you again but I am trying to figure out how to configure SER to forward digits to the SIP/H.323 gateway ( Forward Digits from SER to SIP/H.323 Gateway ). Your help is well appreciated.
My Private VoIP Network -- SER -- SIP/H.323 Gateway -- Corporate Users
Brgds, Ray May
--- Jan Janak jan@iptel.org wrote:
I guess CallManager is using Skinny protocol, isn't it ? If so then you will need some protocol translator (I am not aware of any such).
Jan.
On 23-01 10:25, Raymond May wrote:
Hi SER Gurus, My SER server has been running just perfect for the last 9 months and I am now trying
to
connect my private VoIP network to my Employer's.
They
have a Cisco Call Manager and I am trying to
figure
out how to configure SER so I can make calls from
my
private network to users that are registered to
the
Corporate ( Cisco Call Manager ). Ideally I would
like
to be able to make calls from my private network
to
the users on the Corporate and have users on the Corporate be able to reach users on my VoIp
Network (
SER Server ). Any suggestions would be
appreciated.
Below is current connectivity between my private network and our corporate network.
SER Users --- SER Server --- Internet --- Cisco
Call
Manager --- Corporate Users
Brgds, Ray May
Do you Yahoo!? Yahoo! SiteBuilder - Free web site building tool.
Try it!
http://webhosting.yahoo.com/ps/sb/
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Do you Yahoo!? Yahoo! SiteBuilder - Free web site building tool. Try it! http://webhosting.yahoo.com/ps/sb/
-
Jan Janak