11 Jan
2012
11 Jan
'12
5:36 a.m.
Hi,
i am doing this command in a timer under kamailio:
$var(log)='"'+'denied_calls-'+$stat(denied_calls)+',dos-'+$shv(dos)+'"';
exec_msg("nc -u -w0 10.2.0.54 514 <<< $var(log)");
each time the command is executed, i get the following error:
9(19302) : exec [../../parser/../ip_addr.h:688]: BUG: ip_addr2sbuf: unknown
address family 0
9(19302) ERROR: exec [exec.c:86]: cmd nc -u -w0 10.2.0.54 514 <<<
",denied_calls-0,dos-green" failed. exit_status=-1, errno=32: Broken pipe
any idea?
the syslog server gets the message....
thanks,
Uri
11 Jan
11 Jan
11:29 a.m.
Hello,
On 1/11/12 11:36 AM, Uri Shacked wrote:
Hi,
i am doing this command in a timer under kamailio:
$var(log)='"'+'denied_calls-'+$stat(denied_calls)+',dos-'+$shv(dos)+'"';
exec_msg("nc -u -w0 10.2.0.54 514 <<< $var(log)");
each time the command is executed, i get the following error:
9(19302) : exec [../../parser/../ip_addr.h:688]: BUG: ip_addr2sbuf:
unknown address family 0
9(19302) ERROR: exec [exec.c:86]: cmd nc -u -w0 10.2.0.54 514 <<<
",denied_calls-0,dos-green" failed. exit_status=-1, errno=32: Broken pipe
any idea?
the syslog server gets the message....
the timer execute functions with a faked sip
request, which is not
received from the network, but generated internally. Thus there is no
source IP. Perhaps it should be set as received from itself or loopback
device (127.0.0.1) -- I will look over it.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
12:05 p.m.
Thanks, will be waiting :-)
On 1/11/12, Daniel-Constantin Mierla <miconda(a)gmail.com> wrote:
Hello,
On 1/11/12 11:36 AM, Uri Shacked wrote:
--
Sent from my mobile device
Hi,
i am doing this command in a timer under kamailio:
$var(log)='"'+'denied_calls-'+$stat(denied_calls)+',dos-'+$shv(dos)+'"';
exec_msg("nc -u -w0 10.2.0.54 514 <<< $var(log)");
each time the command is executed, i get the following error:
9(19302) : exec [../../parser/../ip_addr.h:688]: BUG: ip_addr2sbuf:
unknown address family 0
9(19302) ERROR: exec [exec.c:86]: cmd nc -u -w0 10.2.0.54 514 <<<
",denied_calls-0,dos-green" failed. exit_status=-1, errno=32: Broken pipe
any idea?
the syslog server gets the message....
the timer execute functions with a faked
sip request, which is not
received from the network, but generated internally. Thus there is no
source IP. Perhaps it should be set as received from itself or loopback
device (127.0.0.1) -- I will look over it.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
12:40 p.m.
Looking into the source, exec_msg() does not access receive info
(source/destination address). Is there any other action in timer route
accessing source IP or destination IP (like xlog printing $si)?
Cheers,
Daniel
On 1/11/12 6:05 PM, Uri Shacked wrote:
Thanks, will be waiting :-)
On 1/11/12, Daniel-Constantin Mierla<miconda(a)gmail.com> wrote:
> Hello,
>
> On 1/11/12 11:36 AM, Uri Shacked wrote:
>> Hi,
>> i am doing this command in a timer under kamailio:
>>
$var(log)='"'+'denied_calls-'+$stat(denied_calls)+',dos-'+$shv(dos)+'"';
>> exec_msg("nc -u -w0 10.2.0.54 514<<< $var(log)");
>> each time the command is executed, i get the following error:
>> 9(19302) : exec [../../parser/../ip_addr.h:688]: BUG: ip_addr2sbuf:
>> unknown address family 0
>> 9(19302) ERROR: exec [exec.c:86]: cmd nc -u -w0 10.2.0.54 514<<<
>> ",denied_calls-0,dos-green" failed. exit_status=-1, errno=32: Broken
pipe
>> any idea?
>> the syslog server gets the message....
> the timer execute functions with a faked sip request, which is not
> received from the network, but generated internally. Thus there is no
> source IP. Perhaps it should be set as received from itself or loopback
> device (127.0.0.1) -- I will look over it.
>
> Cheers,
> Daniel
>
> --
> Daniel-Constantin Mierla -- http://www.asipto.com
> http://linkedin.com/in/miconda -- http://twitter.com/miconda
>
>
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
1:12 p.m.
no, only the lines you see.
On Wed, Jan 11, 2012 at 7:40 PM, Daniel-Constantin Mierla <miconda(a)gmail.com
wrote:
Looking into the source, exec_msg() does not access
receive info
(source/destination address). Is there any other action in timer route
accessing source IP or destination IP (like xlog printing $si)?
Cheers,
Daniel
On 1/11/12 6:05 PM, Uri Shacked wrote:
Thanks, will be waiting :-)
On 1/11/12, Daniel-Constantin Mierla<miconda(a)gmail.com> wrote:
> Hello,
>
> On 1/11/12 11:36 AM, Uri Shacked wrote:
>
>> Hi,
>> i am doing this command in a timer under kamailio:
>>
$var(log)='"'+'denied_calls-'+**$stat(denied_calls)+',dos-'+$**
>> shv(dos)+'"';
>> exec_msg("nc -u -w0 10.2.0.54 514<<< $var(log)");
>> each time the command is executed, i get the following error:
>> 9(19302) : exec [../../parser/../ip_addr.h:**688]: BUG: ip_addr2sbuf:
>> unknown address family 0
>> 9(19302) ERROR: exec [exec.c:86]: cmd nc -u -w0 10.2.0.54 514<<<
>> ",denied_calls-0,dos-green" failed. exit_status=-1, errno=32: Broken
>> pipe
>> any idea?
>> the syslog server gets the message....
>>
> the timer execute functions with a faked sip request, which is not
> received from the network, but generated internally. Thus there is no
> source IP. Perhaps it should be set as received from itself or loopback
> device (127.0.0.1) -- I will look over it.
>
> Cheers,
> Daniel
>
> --
> Daniel-Constantin Mierla -- http://www.asipto.com
> http://linkedin.com/in/miconda -- http://twitter.com/miconda
>
>
>
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
12 Jan
12 Jan
3:29 a.m.
Hello,
On 1/11/12 7:12 PM, Uri Shacked wrote:
no, only the lines you see.
strange ... anyhow,
I pushed a patch to master branch to set src/dst ip
to 127.0.0.1:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=62e5680…
if you installed from git, after doing in source tree:
git pull origin
do:
git cherry-pick -x 62e5680c9dd4eccb0f177415b7624af832c87693
and reinstall. Let me know if it works and I will backport.
Cheers,
Daniel
On Wed, Jan 11, 2012 at 7:40 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Looking into the source, exec_msg() does not access receive info
(source/destination address). Is there any other action in timer
route accessing source IP or destination IP (like xlog printing $si)?
Cheers,
Daniel
On 1/11/12 6:05 PM, Uri Shacked wrote:
Thanks, will be waiting :-)
On 1/11/12, Daniel-Constantin Mierla<miconda(a)gmail.com
<mailto:miconda@gmail.com>> wrote:
Hello,
On 1/11/12 11:36 AM, Uri Shacked wrote:
Hi,
i am doing this command in a timer under kamailio:
$var(log)='"'+'denied_calls-'+$stat(denied_calls)+',dos-'+$shv(dos)+'"';
exec_msg("nc -u -w0 10.2.0.54 514<<< $var(log)");
each time the command is executed, i get the following
error:
9(19302) : exec [../../parser/../ip_addr.h:688]: BUG:
ip_addr2sbuf:
unknown address family 0
9(19302) ERROR: exec [exec.c:86]: cmd nc -u -w0
10.2.0.54 514<<<
",denied_calls-0,dos-green" failed. exit_status=-1,
errno=32: Broken pipe
any idea?
the syslog server gets the message....
the timer execute functions with a faked sip request,
which is not
received from the network, but generated internally. Thus
there is no
source IP. Perhaps it should be set as received from
itself or loopback
device (127.0.0.1) -- I will look over it.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
<http://www.asipto.com/>
http://linkedin.com/in/miconda -- http://twitter.com/miconda
--
Daniel-Constantin Mierla -- http://www.asipto.com
<http://www.asipto.com/>
http://linkedin.com/in/miconda -- http://twitter.com/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
5:07 a.m.
Hi,
now i get at start:
9(5006) : exec [../../parser/../ip_addr.h:688]: BUG: ip_addr2sbuf: unknown
address family 0
and after 3 time the following is added:
ERROR: exec [exec.c:86]: cmd nc -u -w0 10.2.0.54 514 <<<
",denied_calls-0,dos-green" failed. exit_status=-1, errno=32: Broken pipe
any idea?
kamailio -V
version: kamailio 3.2.1 (i386/linux) 04216f
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC,
DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE,
USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: 04216f
compiled on 11:37:16 Jan 12 2012 with gcc 4.1.2
On Thu, Jan 12, 2012 at 10:29 AM, Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Hello,
On 1/11/12 7:12 PM, Uri Shacked wrote:
no, only the lines you see.
strange ... anyhow, I pushed a patch to master branch to set src/dst ip to
127.0.0.1:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=62e5680…
if you installed from git, after doing in source tree:
git pull origin
do:
git cherry-pick -x 62e5680c9dd4eccb0f177415b7624af832c87693
and reinstall. Let me know if it works and I will backport.
Cheers,
Daniel
On Wed, Jan 11, 2012 at 7:40 PM, Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Looking into the source, exec_msg() does not
access receive info
(source/destination address). Is there any other action in timer route
accessing source IP or destination IP (like xlog printing $si)?
Cheers,
Daniel
On 1/11/12 6:05 PM, Uri Shacked wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda --
http://twitter.com/miconda
Thanks, will be waiting :-)
On 1/11/12, Daniel-Constantin Mierla<miconda(a)gmail.com> wrote:
> Hello,
>
> On 1/11/12 11:36 AM, Uri Shacked wrote:
>
>> Hi,
>> i am doing this command in a timer under kamailio:
>>
>>
$var(log)='"'+'denied_calls-'+$stat(denied_calls)+',dos-'+$shv(dos)+'"';
>> exec_msg("nc -u -w0 10.2.0.54 514<<< $var(log)");
>> each time the command is executed, i get the following error:
>> 9(19302) : exec [../../parser/../ip_addr.h:688]: BUG: ip_addr2sbuf:
>> unknown address family 0
>> 9(19302) ERROR: exec [exec.c:86]: cmd nc -u -w0 10.2.0.54 514<<<
>> ",denied_calls-0,dos-green" failed. exit_status=-1, errno=32: Broken
>> pipe
>> any idea?
>> the syslog server gets the message....
>>
> the timer execute functions with a faked sip request, which is not
> received from the network, but generated internally. Thus there is no
> source IP. Perhaps it should be set as received from itself or loopback
> device (127.0.0.1) -- I will look over it.
>
> Cheers,
> Daniel
>
> --
> Daniel-Constantin Mierla -- http://www.asipto.com
> http://linkedin.com/in/miconda -- http://twitter.com/miconda
>
>
>
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
5:16 a.m.
Hello,
On 1/12/12 11:07 AM, Uri Shacked wrote:
Hi,
now i get at start:
9(5006) : exec [../../parser/../ip_addr.h:688]: BUG: ip_addr2sbuf:
unknown address family 0
do you mean you get it once, at kamailio startup?
and after 3 time the following is added:
ERROR: exec [exec.c:86]: cmd nc -u -w0 10.2.0.54 514 <<<
",denied_calls-0,dos-green" failed. exit_status=-1, errno=32: Broken pipe
any idea?
This is from the execution of the external program.
kamailio -V
version: kamailio 3.2.1 (i386/linux) 04216f
Have you applied the patch? The version seems to be clean, without any
patch.
Can you send the log output with debug=3?
Cheers,
Daniel
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS,
TLS_HOOKS,
USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM,
SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: 04216f
compiled on 11:37:16 Jan 12 2012 with gcc 4.1.2
On Thu, Jan 12, 2012 at 10:29 AM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
On 1/11/12 7:12 PM, Uri Shacked wrote:
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
no, only the lines you see.
strange ... anyhow, I pushed a patch to master branch to set
src/dst ip to 127.0.0.1 <http://127.0.0.1/>:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=62e5680…
if you installed from git, after doing in source tree:
git pull origin
do:
git cherry-pick -x 62e5680c9dd4eccb0f177415b7624af832c87693
and reinstall. Let me know if it works and I will backport.
Cheers,
Daniel
On Wed, Jan 11, 2012 at 7:40 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Looking into the source, exec_msg() does not access receive
info (source/destination address). Is there any other action
in timer route accessing source IP or destination IP (like
xlog printing $si)?
Cheers,
Daniel
On 1/11/12 6:05 PM, Uri Shacked wrote:
Thanks, will be waiting :-)
On 1/11/12, Daniel-Constantin Mierla<miconda(a)gmail.com
<mailto:miconda@gmail.com>> wrote:
Hello,
On 1/11/12 11:36 AM, Uri Shacked wrote:
Hi,
i am doing this command in a timer under kamailio:
$var(log)='"'+'denied_calls-'+$stat(denied_calls)+',dos-'+$shv(dos)+'"';
exec_msg("nc -u -w0 10.2.0.54 514<<<
$var(log)");
each time the command is executed, i get the
following error:
9(19302) : exec [../../parser/../ip_addr.h:688]:
BUG: ip_addr2sbuf:
unknown address family 0
9(19302) ERROR: exec [exec.c:86]: cmd nc -u -w0
10.2.0.54 514<<<
",denied_calls-0,dos-green" failed.
exit_status=-1, errno=32: Broken pipe
any idea?
the syslog server gets the message....
the timer execute functions with a faked sip request,
which is not
received from the network, but generated internally.
Thus there is no
source IP. Perhaps it should be set as received from
itself or loopback
device (127.0.0.1) -- I will look over it.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
<http://www.asipto.com/>
http://linkedin.com/in/miconda --
http://twitter.com/miconda
--
Daniel-Constantin Mierla -- http://www.asipto.com
<http://www.asipto.com/>
http://linkedin.com/in/miconda -- http://twitter.com/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/>
http://linkedin.com/in/miconda -- http://twitter.com/miconda
5:57 a.m.
no, i get it every 10 sec (like the rtimer i set) the first 3 times are the
first line and afterwards the second line apears.
i notice that after a while it cycles again... 3 times etc....
i did :
git pull origin
git cherry-pick -x 62e5680c9dd4eccb0f177415b7624af832c87693
make all
make install
right?
as always... my linux abilities are limited... :-)
thanks.
On Thu, Jan 12, 2012 at 12:16 PM, Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Hello,
On 1/12/12 11:07 AM, Uri Shacked wrote:
Hi,
now i get at start:
9(5006) : exec [../../parser/../ip_addr.h:688]: BUG: ip_addr2sbuf:
unknown address family 0
do you mean you get it once, at kamailio startup?
and after 3 time the following is added:
ERROR: exec [exec.c:86]: cmd nc -u -w0 10.2.0.54 514 <<<
",denied_calls-0,dos-green" failed. exit_status=-1, errno=32: Broken pipe
any idea?
This is from the execution of the external program.
kamailio -V
version: kamailio 3.2.1 (i386/linux) 04216f
Have you applied the patch? The version seems to be clean, without any
patch.
Can you send the log output with debug=3?
Cheers,
Daniel
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC,
DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE,
USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: 04216f
compiled on 11:37:16 Jan 12 2012 with gcc 4.1.2
On Thu, Jan 12, 2012 at 10:29 AM, Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Hello,
On 1/11/12 7:12 PM, Uri Shacked wrote:
no, only the lines you see.
strange ... anyhow, I pushed a patch to master branch to set src/dst ip
to 127.0.0.1:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=62e5680…
if you installed from git, after doing in source tree:
git pull origin
do:
git cherry-pick -x 62e5680c9dd4eccb0f177415b7624af832c87693
and reinstall. Let me know if it works and I will backport.
Cheers,
Daniel
On Wed, Jan 11, 2012 at 7:40 PM, Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
--
Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda --
http://twitter.com/miconda
Looking into the source, exec_msg() does not
access receive info
(source/destination address). Is there any other action in timer route
accessing source IP or destination IP (like xlog printing $si)?
Cheers,
Daniel
On 1/11/12 6:05 PM, Uri Shacked wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- http://www.asipto.comhttp://linkedin.com/in/miconda --
http://twitter.com/miconda
Thanks, will be waiting :-)
On 1/11/12, Daniel-Constantin Mierla<miconda(a)gmail.com> wrote:
> Hello,
>
> On 1/11/12 11:36 AM, Uri Shacked wrote:
>
>> Hi,
>> i am doing this command in a timer under kamailio:
>>
>>
$var(log)='"'+'denied_calls-'+$stat(denied_calls)+',dos-'+$shv(dos)+'"';
>> exec_msg("nc -u -w0 10.2.0.54 514<<< $var(log)");
>> each time the command is executed, i get the following error:
>> 9(19302) : exec [../../parser/../ip_addr.h:688]: BUG: ip_addr2sbuf:
>> unknown address family 0
>> 9(19302) ERROR: exec [exec.c:86]: cmd nc -u -w0 10.2.0.54 514<<<
>> ",denied_calls-0,dos-green" failed. exit_status=-1, errno=32: Broken
>> pipe
>> any idea?
>> the syslog server gets the message....
>>
> the timer execute functions with a faked sip request, which is not
> received from the network, but generated internally. Thus there is no
> source IP. Perhaps it should be set as received from itself or loopback
> device (127.0.0.1) -- I will look over it.
>
> Cheers,
> Daniel
>
> --
> Daniel-Constantin Mierla -- http://www.asipto.com
> http://linkedin.com/in/miconda -- http://twitter.com/miconda
>
>
>
--
Daniel-Constantin Mierla -- http://www.asipto.com
http://linkedin.com/in/miconda -- http://twitter.com/miconda
4733
days inactive
4734
days old
8 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Uri Shacked