2 Jun
2021
2 Jun
'21
8:06 a.m.
Hi,
I am working with the UAC module and trying to register with providers, and can see
that kamailio keeps sending the REGISTER from the private IP address socket on the server
(eth0).
Is it possible to set the default socket or send socket for the REGISTER message that gets
sent out via kamailio?
I am running version 4.4.7.
I notice SIP OPTIONS are being sent out from the public IP address (eth1) on the server
(as I have set socket in dispatcher) and was hoping for same behaviour with uac module.
Please can anyone advise?
Many thanks
Jon
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
2 Jun
2 Jun
8:58 a.m.
There is a socket field in the uacreg table you can use to manage which
interface to use to send register messages from.
On Wed, 2 Jun 2021, 14:15 Jonathan Hunter, <hunterj91(a)hotmail.com> wrote:
Hi,
I am working with the UAC module and trying to register with providers,
and can see
that kamailio keeps sending the REGISTER from the private IP address
socket on the server (eth0).
Is it possible to set the default socket or send socket for the REGISTER
message that gets sent out via kamailio?
I am running version 4.4.7.
I notice SIP OPTIONS are being sent out from the public IP address (eth1)
on the server (as I have set socket in dispatcher) and was hoping for same
behaviour with uac module.
Please can anyone advise?
Many thanks
Jon
Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
8:59 a.m.
Ahh sorry I did not see the version of kamailio you are using...
On Wed, 2 Jun 2021, 14:58 Yuriy Gorlichenko, <ovoshlook(a)gmail.com> wrote:
There is a socket field in the uacreg table you can
use to manage which
interface to use to send register messages from.
On Wed, 2 Jun 2021, 14:15 Jonathan Hunter, <hunterj91(a)hotmail.com> wrote:
Hi,
I am working with the UAC module and trying to register with providers,
and can see
that kamailio keeps sending the REGISTER from the private IP address
socket on the server (eth0).
Is it possible to set the default socket or send socket for the REGISTER
message that gets sent out via kamailio?
I am running version 4.4.7.
I notice SIP OPTIONS are being sent out from the public IP address (eth1)
on the server (as I have set socket in dispatcher) and was hoping for same
behaviour with uac module.
Please can anyone advise?
Many thanks
Jon
Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
9:20 a.m.
Hi Yuriy,
Thank you for the reply! Yes I had seen that but not in 4.4, I assume that’s version 5 and
above?
Thanks
Jon
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
From: Yuriy Gorlichenko<mailto:ovoshlook@gmail.com>
Sent: 02 June 2021 14:16
To: Kamailio (SER) - Users Mailing List<mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] UAC module register originating from private interface on server
Ahh sorry I did not see the version of kamailio you are using...
On Wed, 2 Jun 2021, 14:58 Yuriy Gorlichenko,
<ovoshlook@gmail.com<mailto:ovoshlook@gmail.com>> wrote:
There is a socket field in the uacreg table you can use to manage which interface to use
to send register messages from.
On Wed, 2 Jun 2021, 14:15 Jonathan Hunter,
<hunterj91@hotmail.com<mailto:hunterj91@hotmail.com>> wrote:
Hi,
I am working with the UAC module and trying to register with providers, and can see
that kamailio keeps sending the REGISTER from the private IP address socket on the server
(eth0).
Is it possible to set the default socket or send socket for the REGISTER message that gets
sent out via kamailio?
I am running version 4.4.7.
I notice SIP OPTIONS are being sent out from the public IP address (eth1) on the server
(as I have set socket in dispatcher) and was hoping for same behaviour with uac module.
Please can anyone advise?
Many thanks
Jon
Sent from
Mail<https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2F…
for Windows 10
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users<https://eme…
1:25 p.m.
Yes. That is correct. Also from 5.5 you can specify contact header for
particular registration separately via DB.
On Wed, 2 Jun 2021, 15:33 Jonathan Hunter, <hunterj91(a)hotmail.com> wrote:
Hi Yuriy,
Thank you for the reply! Yes I had seen that but not in 4.4, I assume
that’s version 5 and above?
Thanks
Jon
Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10
*From: *Yuriy Gorlichenko <ovoshlook(a)gmail.com>
*Sent: *02 June 2021 14:16
*To: *Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] UAC module register originating from private
interface on server
Ahh sorry I did not see the version of kamailio you are using...
On Wed, 2 Jun 2021, 14:58 Yuriy Gorlichenko, <ovoshlook(a)gmail.com> wrote:
There is a socket field in the uacreg table you can use to manage which
interface to use to send register messages from.
On Wed, 2 Jun 2021, 14:15 Jonathan Hunter, <hunterj91(a)hotmail.com> wrote:
Hi,
I am working with the UAC module and trying to register with providers,
and can see
that kamailio keeps sending the REGISTER from the private IP address
socket on the server (eth0).
Is it possible to set the default socket or send socket for the REGISTER
message that gets sent out via kamailio?
I am running version 4.4.7.
I notice SIP OPTIONS are being sent out from the public IP address (eth1)
on the server (as I have set socket in dispatcher) and was hoping for same
behaviour with uac module.
Please can anyone advise?
Many thanks
Jon
Sent from Mail
<https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgo.microsoft.com%2Ffwlink%2F%3FLinkId%3D550986&data=04%7C01%7C%7C312a3925a8d54d6321c708d925c8a2fe%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582365917513280%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=irrJuXGA%2FeZ%2FeoIAxawrKaYu%2BK6IcGwop2zCBdxujwQ%3D&reserved=0>
for Windows 10
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.kamailio.org%2Fcgi-bin%2Fmailman%2Flistinfo%2Fsr-users&data=04%7C01%7C%7C312a3925a8d54d6321c708d925c8a2fe%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637582365917523351%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=SpDEUsw%2B1mcg4vUkJeT2jKbw63lInmdWa2AC5r%2FsiHQ%3D&reserved=0>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1356
days inactive
1356
days old
4 comments
2 participants
participants (2)
-
Jonathan Hunter -
Yuriy Gorlichenko