Steven, This was the config used: # # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "./modules/mysql/mysql.so" loadmodule "./modules/sl/sl.so" loadmodule "./modules/tm/tm.so" loadmodule "./modules/rr/rr.so" loadmodule "./modules/maxfwd/maxfwd.so" loadmodule "./modules/usrloc/usrloc.so" loadmodule "./modules/registrar/registrar.so" loadmodule "./modules/uri/uri.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "./modules/auth/auth.so" loadmodule "./modules/auth_db/auth_db.so" loadmodule "modules/acc/acc.so" loadmodule "./modules/auth_radius/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc", "log_level", 1) modparam("acc", "radius_flag", 1) # ------------------------- request routing logic ------------------- alias=xxxxx.orange.co.uk # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing # if (loose_route()) { # t_relay(); # break; # }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "0"); break; }; save("location"); break; }; if (method=="INVITE") { log(1, "INVITE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; if (!t_relay()) { sl_reply_error(); break; }; } "Steven R. Bunin" <steve(a)solaas.com> on 29/09/2003 19:01:55 To: Jaime GIL/EN/HTLUK@HTLUK cc: serusers(a)lists.iptel.org Subject: re: Problems with accounting - can't get stop records Jaime, Thanks for the resposne.. I have my loose_route shut off. I think the problem may have to do with an error message I am receiving which is "ERROR: reply cannot be parsed" from my stderr. Do you have a working version of a script that works with 0.8.11 and gets stop records I could look at? It should give me a hand.. I know I am so close to solving this but it is a struggle. Steve jaime.gil(a)orange.co.uk wrote: >Steven, > >I remember having the same problem. In my case, the problem seemed to be in > the >loose_route processing. I don't know what it has to do with the accounting >module, but commenting out this part made the trick in my case. > >Jaime > >"Steven R. Bunin" <steve(a)solaas.com> on 26/09/2003 17:11:41 > >To: serusers(a)lists.iptel.org >cc: (bcc: Jaime GIL/EN/HTLUK) > >Subject: [Serusers] Re: Serusers Digest, Vol 5, Issue 63 > >Hi all, > >I have successfully gotten radius authentication working and I started getting >Radius Start records for accounting but I am not sure what I am doing wrong in >regards to getting radius Stop records. > >Below is the area I believe has the most affect on Radius Acccounting from my >Log File. Any suggestions would be appreciated and if it would help to see the >full Config file I will send it as well. > >record_route(); > > if (method=="REGISTER") { > ># Uncomment this if you want to use digest authentication > if (!radius_www_authorize("")) { > www_challenge("", "0"); > break; > }; > > save("location"); > break; > }; > >if (method =="INVITE") >{ >log(1,"INVITE\n"); >setflag(1); >}; >if (method=="MESSAGE") { >log(1,"MESSAGE\n"); >setflag(1); >}; >if (method=="BYE"){ >log (1, "BYE or CANCEL\n"); >setflag(1); >}; >if (method=="CANCEL"){ >log (1, "BYE or CANCEL\n"); >setflag(1); >}; > >Thanks in advance, > >Steve > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > ------------------------------------------------------------------------ > Name: att1.eml > att1.eml Type: Internet E-Mail Message (message/rfc822) > Encoding: base64 > > ------------------------------------------------------------------------ > > > ******************************************************************************* >Important. >Confidentiality: This communication is intended for the above-named person and >may be confidential and/or legally privileged. Any opinions expressed in this >communication are not necessarily those of the company. If it has come to you >in error you must take no action based on it, nor must you copy or show it to >anyone; please delete/destroy and inform the sender immediately. > >Monitoring/Viruses >Orange may monitor all incoming and outgoing emails in line with current >legislation. Although we have taken steps to ensure that this email and >attachments are free from any virus, we advise that in keeping with good >computing practice the recipient should ensure they are actually virus free. > >Orange PCS Limited is a subsidiary of Orange SA and is registered in England > No >2178917, with its address at St James Court, Great Park Road, Almondsbury > Park, >Bradley Stoke, Bristol BS32 4QJ. > > ******************************************************************************* -- Steven R. Bunin - Managing Partner SOLAAS LLC 10 East 39th Street Suite 1125 New York, NY 10016 (+001) 212-532-6700 Cellular: 646-739-7000 Fax (+001) 212-532-6776 http://www.solaas.com -- This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. ------------------------------------------------------------------------ Name: att1.eml att1.eml Type: Internet E-Mail Message (message/rfc822) Encoding: base64 ------------------------------------------------------------------------ ******************************************************************************* Important. Confidentiality: This communication is intended for the above-named person and may be confidential and/or legally privileged. Any opinions expressed in this communication are not necessarily those of the company. If it has come to you in error you must take no action based on it, nor must you copy or show it to anyone; please delete/destroy and inform the sender immediately. Monitoring/Viruses Orange may monitor all incoming and outgoing emails in line with current legislation. Although we have taken steps to ensure that this email and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. Orange PCS Limited is a subsidiary of Orange SA and is registered in England No 2178917, with its address at St James Court, Great Park Road, Almondsbury Park, Bradley Stoke, Bristol BS32 4QJ. *******************************************************************************