Thanks. Unfortunately I still can.t connect using iptel web client. Anyone? -----Original Message----- From: Andy Blen [mailto:andy.blen@iptel.org] Sent: Thu 6/19/2003 11:44 AM To: Marcelo Schmidt; serusers@lists.iptel.org Cc: Subject: Re: [Serusers] ser 0.8.10 (i386/freebsd) Reading documentation may be very helpful to you, in particular http://www.iptel.org/ser/doc/seruser-html/x878.html#AEN883 -andy
At 07:27 PM 6/19/2003, Marcelo Schmidt wrote:
I installed ser yesterday and I was trying to get an UA to connect to it. I created just one user: sip:marcelo@marcelo.homeunix.com and used an iptel.org account to send a message, I got: 483 Too Many Hops. I attached the ser.cfg and a capture file from tcpdump.
Thanks, Marcelo.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Marcelo,
you need to give us sufficient information about your installation -- we are not so good in guessing to identify the problem without - your config file - message captured on the net - log messages
Also, what do you mean by iptel web client -- we are not aware of any such.
-andy
At 08:02 AM 6/20/2003, Marcelo Schmidt wrote:
Thanks. Unfortunately I still can.t connect using iptel web client. Anyone? -----Original Message----- From: Andy Blen [mailto:andy.blen@iptel.org] Sent: Thu 6/19/2003 11:44 AM To: Marcelo Schmidt; serusers@lists.iptel.org Cc: Subject: Re: [Serusers] ser 0.8.10 (i386/freebsd) Reading documentation may be very helpful to you, in particular http://www.iptel.org/ser/doc/seruser-html/x878.html#AEN883 -andy
At 07:27 PM 6/19/2003, Marcelo Schmidt wrote:
I installed ser yesterday and I was trying to get an UA to connect to it. I created just one user: sip:marcelo@marcelo.homeunix.com and used an iptel.org account to send a message, I got: 483 Too Many Hops. I attached the ser.cfg and a capture file from tcpdump.
Thanks, Marcelo.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Andy Blen iptel.org Services
-- Andy Blen iptel.org Services
These are new logs. but they look the same as those I sent yesterday ;)
Thanks, Marcelo.
btw: i tried alias already.
------- 483 Too Many Hops... ------- 41 packets received by filter 0 packets dropped by kernel see ser.cap ------- attached ser.cfg ------- attached ser.moni -------
-----Original Message----- From: Andy Blen [mailto:andy.blen@iptel.org] Sent: Friday, June 20, 2003 2:44 AM To: ms_email@pacbell.net; serusers@lists.iptel.org Subject: RE: [Serusers] ser 0.8.10 (i386/freebsd)
Marcelo,
you need to give us sufficient information about your installation -- we are not so good in guessing to identify the problem without - your config file - message captured on the net - log messages
Also, what do you mean by iptel web client -- we are not aware of any such.
-andy
At 08:02 AM 6/20/2003, Marcelo Schmidt wrote:
Thanks. Unfortunately I still can.t connect using iptel web client.
Anyone?
-----Original Message----- From: Andy Blen [mailto:andy.blen@iptel.org] Sent: Thu 6/19/2003 11:44 AM To: Marcelo Schmidt; serusers@lists.iptel.org Cc: Subject: Re: [Serusers] ser 0.8.10 (i386/freebsd) Reading documentation may be very helpful to you, in particular http://www.iptel.org/ser/doc/seruser-html/x878.html#AEN883 -andy
At 07:27 PM 6/19/2003, Marcelo Schmidt wrote:
I installed ser yesterday and I was trying to get an UA to connect to it.
I created just one user:
sip:marcelo@marcelo.homeunix.com and used an iptel.org account to send a
message, I got:
483 Too Many Hops. I attached the ser.cfg and a capture file from
tcpdump.
Thanks, Marcelo.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Andy Blen iptel.org Services
-- Andy Blen iptel.org Services
We need to see _content_ of the packets to judge what is misonfigured in your system (use for example ngrep to capture them). Headers (as bellow) are not sufficient. See our reporting guidelines as on our website www.iptel.org/ser/problems/
07:31:48.402147 fox.iptel.org.5060 > chachi.5060: udp 479 (DF) [tos 0x10] 07:31:49.039882 fox.iptel.org.5060 > chachi.5060: udp 479 (DF) [tos 0x10] 07:31:51.059680 fox.iptel.org.5060 > chachi.5060: udp 479 (DF) [tos 0x10] 07:31:55.100089 fox.iptel.org.5060 > chachi.5060: udp 479 (DF) [tos 0x10] 07:31:57.855823 chachi.5060 > fox.iptel.org.5060: udp 559
andy
At 04:37 PM 6/20/2003, Marcelo Schmidt wrote:
These are new logs. but they look the same as those I sent yesterday ;)
Thanks, Marcelo.
btw: i tried alias already.
483 Too Many Hops...
41 packets received by filter 0 packets dropped by kernel see ser.cap
attached ser.cfg
attached ser.moni
-----Original Message----- From: Andy Blen [mailto:andy.blen@iptel.org] Sent: Friday, June 20, 2003 2:44 AM To: ms_email@pacbell.net; serusers@lists.iptel.org Subject: RE: [Serusers] ser 0.8.10 (i386/freebsd)
Marcelo,
you need to give us sufficient information about your installation -- we are not so good in guessing to identify the problem without
- your config file
- message captured on the net
- log messages
Also, what do you mean by iptel web client -- we are not aware of any such.
-andy
At 08:02 AM 6/20/2003, Marcelo Schmidt wrote:
Thanks. Unfortunately I still can.t connect using iptel web client.
Anyone?
-----Original Message----- From: Andy Blen [mailto:andy.blen@iptel.org] Sent: Thu 6/19/2003 11:44 AM To: Marcelo Schmidt; serusers@lists.iptel.org Cc: Subject: Re: [Serusers] ser 0.8.10 (i386/freebsd) Reading documentation may be very helpful to you, in particular http://www.iptel.org/ser/doc/seruser-html/x878.html#AEN883 -andy
At 07:27 PM 6/19/2003, Marcelo Schmidt wrote:
I installed ser yesterday and I was trying to get an UA to connect to it.
I created just one user:
sip:marcelo@marcelo.homeunix.com and used an iptel.org account to send a
message, I got:
483 Too Many Hops. I attached the ser.cfg and a capture file from
tcpdump.
Thanks, Marcelo.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Andy Blen iptel.org Services
-- Andy Blen iptel.org Services
Thanks. I found the problem and it's working ok now.
Cheers, Marcelo.
-----Original Message----- From: Andy Blen [mailto:andy.blen@iptel.org] Sent: Saturday, June 21, 2003 4:34 AM To: Marcelo Schmidt; serusers@lists.iptel.org Subject: RE: [Serusers] ser 0.8.10 (i386/freebsd)
We need to see _content_ of the packets to judge what is misonfigured in your system (use for example ngrep to capture them). Headers (as bellow) are not sufficient. See our reporting guidelines as on our website www.iptel.org/ser/problems/
07:31:48.402147 fox.iptel.org.5060 > chachi.5060: udp 479 (DF) [tos 0x10] 07:31:49.039882 fox.iptel.org.5060 > chachi.5060: udp 479 (DF) [tos 0x10] 07:31:51.059680 fox.iptel.org.5060 > chachi.5060: udp 479 (DF) [tos 0x10] 07:31:55.100089 fox.iptel.org.5060 > chachi.5060: udp 479 (DF) [tos 0x10] 07:31:57.855823 chachi.5060 > fox.iptel.org.5060: udp 559
andy
At 04:37 PM 6/20/2003, Marcelo Schmidt wrote:
These are new logs. but they look the same as those I sent yesterday ;)
Thanks, Marcelo.
btw: i tried alias already.
483 Too Many Hops...
41 packets received by filter 0 packets dropped by kernel see ser.cap
attached ser.cfg
attached ser.moni
-----Original Message----- From: Andy Blen [mailto:andy.blen@iptel.org] Sent: Friday, June 20, 2003 2:44 AM To: ms_email@pacbell.net; serusers@lists.iptel.org Subject: RE: [Serusers] ser 0.8.10 (i386/freebsd)
Marcelo,
you need to give us sufficient information about your installation -- we are not so good in guessing to identify the problem without
- your config file
- message captured on the net
- log messages
Also, what do you mean by iptel web client -- we are not aware of any such.
-andy
At 08:02 AM 6/20/2003, Marcelo Schmidt wrote:
Thanks. Unfortunately I still can.t connect using iptel web client.
Anyone?
-----Original Message----- From: Andy Blen [mailto:andy.blen@iptel.org] Sent: Thu 6/19/2003 11:44 AM To: Marcelo Schmidt; serusers@lists.iptel.org Cc: Subject: Re: [Serusers] ser 0.8.10 (i386/freebsd) Reading documentation may be very helpful to you, in particular http://www.iptel.org/ser/doc/seruser-html/x878.html#AEN883 -andy
At 07:27 PM 6/19/2003, Marcelo Schmidt wrote:
I installed ser yesterday and I was trying to get an UA to connect to it.
I created just one user:
sip:marcelo@marcelo.homeunix.com and used an iptel.org account to send
a
message, I got:
483 Too Many Hops. I attached the ser.cfg and a capture file from
tcpdump.
Thanks, Marcelo.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Andy Blen iptel.org Services
-- Andy Blen iptel.org Services