RE: [OpenSER-Users] question about nat pinging - sr-users

23 Oct 2007

Hi Bogdan,

This is nice to know. However I think it would be easier if someone
could control the pinging from script. Maybe a new module parameter that
could substitue ping_nated_only with the following values:
0 : ping all contacts
1 : ping contacts with nat flag on
2 : ping contacts with sipping_bflag on

just my 2c. Thank you

George

...
  -----Original Message-----
 From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] 
 Sent: Tuesday, October 23, 2007 11:41 AM
 To: Papadopoulos Georgios
 Cc: users(a)openser.org
 Subject: Re: [OpenSER-Users] question about nat pinging

 Hi George,

 There is in 1.3 a new MI function for controlling natpings. 
 See nh_enable_ping :
     http://www.openser.org/docs/modules/1.3.x/nathelper.html#AEN432

 Regards,
 Bogdan

 Papadopoulos Georgios wrote:
  Hello all,

 I am trying to find a way to turn off nat pinging from   Openser during 
  runtime. Here is the problem: openser1 replicates
registrations to
 openser2 which is working as a stand-by. Openser1 sends   OPTIONS pings 
  to all nated clients. When either of the two
servers receive a 
 replicated REGISTER, it saves it without setting the   sipping_bflag. So
  openser2 will not send unecessary OPTIONS pings.
However openser2 
 sends 4 byte pings to all nated clients. Is there any way   to turn off 
  these pings?

 thank you

 George

   Disclaimer

 The information in this e-mail and any attachments is   confidential. It 
  is intended solely for the attention and use of
the named 
 addressee(s). If you are not the intended recipient, or person 
 responsible for delivering this information to the intended   recipient, 
  please notify the sender immediately. Unless you
are the intended 
 recipient or his/her representative you are not authorized to, and 
 must not, read, copy, distribute, use or retain this message or any 
 part of it. E-mail transmission cannot be guaranteed to be   secure or 
  error-free as information could be intercepted,
corrupted, lost, 
 destroyed, arrive late or incomplete, or contain viruses.

   ----------------------------------------------------------------------
  --

 _______________________________________________
 Users mailing list
 Users(a)openser.org
 http://openser.org/cgi-bin/mailman/listinfo/users