24 Jun
2004
24 Jun
'04
11:16 p.m.
I am using AS5300 as PSTN Gateway for SER. I'd like to make the AS5300 only accept sip
call forward by ser. Does anybody know how to setup AS5300 for this?
Gary
24 Jun
24 Jun
11:23 p.m.
You can set an ACL to block incoming SIP traffic to your AS5300 like this:
interface FastEthernet 0
ip access-group 101 in
!
access-list 101 permit udp host ip.of.you.ser any eq 5060
access-list 101 deny udp any any eq 5060 log
Ezequiel Colombo
----- Original Message -----
From: gc
To: serusers(a)lists.iptel.org
Sent: Thursday, June 24, 2004 5:16 PM
Subject: [Serusers] Using AS5300 for SER
I am using AS5300 as PSTN Gateway for SER. I'd like to make the AS5300 only accept
sip call forward by ser. Does anybody know how to setup AS5300 for this?
Gary
------------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
11:26 p.m.
OOPS !
Sorry, like this:
!
access-list 101 permit udp host ip.of.you.ser any eq 5060
access-list 101 deny udp any any eq 5060 log
access-list 101 permit ip any any
!
interface FastEthernet 0
ip access-group 101 in
!
Ezequiel
----- Original Message -----
From: Ezequiel Colombo
To: gc ; serusers(a)lists.iptel.org
Sent: Thursday, June 24, 2004 5:23 PM
Subject: Re: [Serusers] Using AS5300 for SER
You can set an ACL to block incoming SIP traffic to your AS5300 like this:
interface FastEthernet 0
ip access-group 101 in
!
access-list 101 permit udp host ip.of.you.ser any eq 5060
access-list 101 deny udp any any eq 5060 log
Ezequiel Colombo
----- Original Message -----
From: gc
To: serusers(a)lists.iptel.org
Sent: Thursday, June 24, 2004 5:16 PM
Subject: [Serusers] Using AS5300 for SER
I am using AS5300 as PSTN Gateway for SER. I'd like to make the AS5300 only accept
sip call forward by ser. Does anybody know how to setup AS5300 for this?
Gary
----------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
------------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
25 Jun
25 Jun
1:42 p.m.
Though note that won't in itself protect you against some malefactor
forging the source IP of your ser machine (and if you are using
stateless forwarding as far as I can see s. If your ser box and
5300 are on the same network, you need to stop spoofed IP at the
border as well if you want to restrict the 5300 from talking to
machines other than ser.
Alex
--On 24 June 2004 17:26 -0300 Ezequiel Colombo <ecolombo(a)arcotel.net> wrote:
OOPS !
Sorry, like this:
!
access-list 101 permit udp host ip.of.you.ser any eq 5060
access-list 101 deny udp any any eq 5060 log
access-list 101 permit ip any any
!
interface FastEthernet 0
ip access-group 101 in
!
Ezequiel
----- Original Message -----
From: Ezequiel Colombo
To: gc ; serusers(a)lists.iptel.org
Sent: Thursday, June 24, 2004 5:23 PM
Subject: Re: [Serusers] Using AS5300 for SER
You can set an ACL to block incoming SIP traffic to your AS5300 like
this:
interface FastEthernet 0
ip access-group 101 in
!
access-list 101 permit udp host ip.of.you.ser any eq 5060
access-list 101 deny udp any any eq 5060 log
Ezequiel Colombo
----- Original Message -----
From: gc
To: serusers(a)lists.iptel.org
Sent: Thursday, June 24, 2004 5:16 PM
Subject: [Serusers] Using AS5300 for SER
I am using AS5300 as PSTN Gateway for SER. I'd like to make the AS5300
only accept sip call forward by ser. Does anybody know how to setup
AS5300 for this?
Gary
__________________________________________________
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
__________________________________________________
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Alex
24 Jun
24 Jun
11:23 p.m.
Where 10.1.1.1 is the address of the SER host and 10.2.1.1 is the
address of the AS5300.
access-list 101 permit ip host 10.1.1.1 host 10.2.1.1
access-list 101 deny tcp any host 10.2.1.1 eq 5060
access-list 101 deny udp any host 10.2.1.1 eq 5060
access-list 101 permit ip any any
- Jeremy
On Thu, 24 Jun 2004, gc wrote:
Date: Thu, 24 Jun 2004 16:16:45 -0400
From: gc <garych(a)unidial.com>
To: serusers(a)lists.iptel.org
Subject: [Serusers] Using AS5300 for SER
I am using AS5300 as PSTN Gateway for SER. I'd like to make the AS5300 only accept
sip call forward by ser. Does anybody know how to setup AS5300 for this?
Gary
--
7457
days inactive
7458
days old
4 comments
4 participants
participants (4)
-
Alex Bligh -
Ezequiel Colombo -
gc -
Jeremy George