I am a newcome ,I install a SER server ,it's working well [root@a sbin]# ser -dddd Listening on 127.0.0.1 [127.0.0.1]:5060 221.202.129.165 [221.202.129.165]:5060 Aliases: a.jzmv.com:5060 localhost:5060

tail -f /var/log/messages Dec 31 09:14:17 a ser[16586]: mod_init(): Database connection opened successfuly Dec 31 09:14:17 a ser[16586]: INFO: udp_init: SO_RCVBUF is initially 65535 Dec 31 09:14:17 a ser[16586]: INFO: udp_init: SO_RCVBUF is finally 262142 Dec 31 09:14:17 a ser[16586]: ERROR: tcp_init: bind(6, 0x80d8320, 16) on 127.0.0.1: Address already in use Dec 31 09:14:17 a ser[16586]: INFO: signal 15 received #serctl add zhaomin zm9898 zhaomin@jzmv.com OK but I used the sipphone by the user name zhaomin login .it tell me login is failt.my ser.cfg is blow: debug=7 fork=yes log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 2)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("jzmv.com", "subscriber")) { www_challenge("jzmv.com", "0"); break; };

save("location"); break; };

# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

} Where is my failt ? anyones can help me ? Thanks ZhaoMin