29 Jun
2017
29 Jun
'17
4:27 p.m.
Hi, all
Is there any way to get remote ip address of both sender($si) and
receiver(?)? I am configuring kamailio with multiple rtpproxy sets.
Basically, rtpproxy set will be choosed based on the country those ip
addresses of caller and callee belong to. Lets say if caller and callee are
both in US, set 1 will selected. If they are not in the same country, set 2
will be selected. I dont know if there is any way to do that.
Best regards
Fisher
29 Jun
29 Jun
4:46 p.m.
Hi,
where do you get the IP address of the receiver from? You can get the
local interface address of Kamailio where the request was received
with $Ri, but I guess you want the IP address of the target host. If
you are dealing with locally registered users only, you can use the
request URI after calling lookup("location"). This should contain the
target's IP address somewhere.
Best Regards,
Sebastian
On Thu, Jun 29, 2017 at 4:27 PM, vuleetu <vuleetu(a)gmail.com> wrote:
Hi, all
Is there any way to get remote ip address of both sender($si) and
receiver(?)? I am configuring kamailio with multiple rtpproxy sets.
Basically, rtpproxy set will be choosed based on the country those ip
addresses of caller and callee belong to. Lets say if caller and callee are
both in US, set 1 will selected. If they are not in the same country, set 2
will be selected. I dont know if there is any way to do that.
Best regards
Fisher
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
30 Jun
30 Jun
10:38 a.m.
yes, i just want remote user's ip address. It is the received filed of
location table. After try the suggestion you gave, i still can't get remote
ip address of remote receiver.
On Thu, Jun 29, 2017 at 10:46 PM, Sebastian Damm <damm(a)sipgate.de> wrote:
Hi,
where do you get the IP address of the receiver from? You can get the
local interface address of Kamailio where the request was received
with $Ri, but I guess you want the IP address of the target host. If
you are dealing with locally registered users only, you can use the
request URI after calling lookup("location"). This should contain the
target's IP address somewhere.
Best Regards,
Sebastian
On Thu, Jun 29, 2017 at 4:27 PM, vuleetu <vuleetu(a)gmail.com> wrote:
Hi, all
Is there any way to get remote ip address of both sender($si) and
receiver(?)? I am configuring kamailio with multiple rtpproxy sets.
Basically, rtpproxy set will be choosed based on the country those ip
addresses of caller and callee belong to. Lets say if caller and callee
are
both in US, set 1 will selected. If they are not
in the same country,
set 2
will be selected. I dont know if there is any
way to do that.
Best regards
Fisher
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
29 Jun
29 Jun
4:57 p.m.
Hi.
I wrote this code, I check do the both peers are in the same network
or not. It works correctly.
# Check if both peers are in the same network(nat).
if (is_method("INVITE")){
lookup("location","m");
$var(x) = $(ru{s.select,1,@});
$var(y) = $(var(x){s.select,0,:});
if ($var(y) == $si)
$var(nat) = "yes";
else
$var(nat) = "no";
}
With Regagrds.
Mojtaba Esfandiari.S
On Thu, Jun 29, 2017 at 6:57 PM, vuleetu <vuleetu(a)gmail.com> wrote:
Hi, all
Is there any way to get remote ip address of both sender($si) and
receiver(?)? I am configuring kamailio with multiple rtpproxy sets.
Basically, rtpproxy set will be choosed based on the country those ip
addresses of caller and callee belong to. Lets say if caller and callee are
both in US, set 1 will selected. If they are not in the same country, set 2
will be selected. I dont know if there is any way to do that.
Best regards
Fisher
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
30 Jun
30 Jun
10:33 a.m.
I tried, but no luck. Could you tell which route block i should place these
code to?
On Thu, Jun 29, 2017 at 10:57 PM, Mojtaba <mespio(a)gmail.com> wrote:
Hi.
I wrote this code, I check do the both peers are in the same network
or not. It works correctly.
# Check if both peers are in the same network(nat).
if (is_method("INVITE")){
lookup("location","m");
$var(x) = $(ru{s.select,1,@});
$var(y) = $(var(x){s.select,0,:});
if ($var(y) == $si)
$var(nat) = "yes";
else
$var(nat) = "no";
}
With Regagrds.
Mojtaba Esfandiari.S
On Thu, Jun 29, 2017 at 6:57 PM, vuleetu <vuleetu(a)gmail.com> wrote:
Hi, all
Is there any way to get remote ip address of both sender($si) and
receiver(?)? I am configuring kamailio with multiple rtpproxy sets.
Basically, rtpproxy set will be choosed based on the country those ip
addresses of caller and callee belong to. Lets say if caller and callee
are
both in US, set 1 will selected. If they are not
in the same country,
set 2
will be selected. I dont know if there is any
way to do that.
Best regards
Fisher
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
12:07 p.m.
Let me know how do you test it?
You should write it in Request-route block
On 30 Jun 2017 13:04, "vuleetu" <vuleetu(a)gmail.com> wrote:
I tried, but no luck. Could you tell which route block
i should place
these code to?
On Thu, Jun 29, 2017 at 10:57 PM, Mojtaba <mespio(a)gmail.com> wrote:
Hi.
I wrote this code, I check do the both peers are in the same network
or not. It works correctly.
# Check if both peers are in the same network(nat).
if (is_method("INVITE")){
lookup("location","m");
$var(x) = $(ru{s.select,1,@});
$var(y) = $(var(x){s.select,0,:});
if ($var(y) == $si)
$var(nat) = "yes";
else
$var(nat) = "no";
}
With Regagrds.
Mojtaba Esfandiari.S
On Thu, Jun 29, 2017 at 6:57 PM, vuleetu <vuleetu(a)gmail.com> wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi, all
Is there any way to get remote ip address of both sender($si) and
receiver(?)? I am configuring kamailio with multiple rtpproxy sets.
Basically, rtpproxy set will be choosed based on the country those ip
addresses of caller and callee belong to. Lets say if caller and callee
are
both in US, set 1 will selected. If they are not
in the same country,
set 2
will be selected. I dont know if there is any
way to do that.
Best regards
Fisher
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2493
days inactive
2494
days old
5 comments
3 participants
participants (3)
-
Mojtaba -
Sebastian Damm -
vuleetu