27 Mar
2007
27 Mar
'07
9:05 a.m.
Hi,
Is it possible to register two (or more) identifiers by user, such as
phone number, username or service ?
Thank
27 Mar
27 Mar
10:30 a.m.
The only identifier which is REGISTERed is the current location of the
SIP client (ipaddress:port). This gets mapped to the SIP AoR (the user's
SIP address).
A user can use several clients concurrently. Then this user will show up
multiple times in the location table - one entry for each SIP client.
Hope this helps - I still don't understand what you want to achieve.
regards
klaus
Bodin Bruno wrote:
Hi,
Is it possible to register two (or more) identifiers by user, such as
phone number, username or service ?
Thank
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
10:38 a.m.
New subject: [Users] Problem configuring the openSER with the DISC
Hi All,
I'm trying use to Diameter Server Client (DISC) for the authentication
purpose (using the auth_diameter module). But I'm facing issues while
creating a connection between openSER and DISC. The diameter client does
not accept the connection from the openSER.
Please let me know if somebody has tried this out and can pass me the
config files and the code changes if any.
Thanks,
Priyanka
The information contained in this electronic message and any attachments to this message
are intended for the exclusive use of the addressee(s) and may contain proprietary,
confidential or privileged information. If you are not the intended recipient, you should
not disseminate, distribute or copy this e-mail. Please notify the sender immediately and
destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this
email and any attachments for the presence of viruses. The company accepts no liability
for any damage caused by any virus transmitted by this email.
www.wipro.com
10:46 a.m.
New subject: [Users] Problem configuring the openSER with the DISC
Hello Priyanka,
Diameter and radius both are same purpose.
DialMeter Server never communicate with OpenSER, Vice versa,
So Need the DiaMeter client, Which play the main role to Both openSER or
Diameter,
U problem in Diameter Clinet and server Configuration,
-UA -------->OpenSER-->DiameterClient ---> Diameter Server.
in DiC u should configured the authentation, where the Server is located.
I'm Using the Radius for AAA,
Thanks & Regards
Sunkara Ravi Prakash
Hyd.....
On 3/27/07, priyanka.bhargava(a)wipro.com <priyanka.bhargava(a)wipro.com> wrote:
Hi All,
I'm trying use to Diameter Server Client (DISC) for the authentication
purpose (using the auth_diameter module). But I'm facing issues while
creating a connection between openSER and DISC. The diameter client does
not accept the connection from the openSER.
Please let me know if somebody has tried this out and can pass me the
config files and the code changes if any.
Thanks,
Priyanka
The information contained in this electronic message and any attachments
to this message are intended for the exclusive use of the addressee(s) and
may contain proprietary, confidential or privileged information. If you are
not the intended recipient, you should not disseminate, distribute or copy
this e-mail. Please notify the sender immediately and destroy all copies of
this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient
should check this email and any attachments for the presence of viruses. The
company accepts no liability for any damage caused by any virus transmitted
by this email.
www.wipro.com
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
--
Thanks and Regards
Ravi Prakash Sunkara
ravi.sunkara(a)hyperion-tech.com
M:+91 9985077535
www.hyperion-tech.com
Client and Parent company :- www.august-networks.com
11:10 a.m.
New subject: [Users] Problem configuring the openSER with the DISC
Hi Ravi,
Thanks for your quick response. I'm actually connecting openSER with the
diameter client. But the client is not accepting the connection. The
configuration between the diameter client and server are already done.
And they are communicating properly the only problem is the
communication between the Diameter Client and the openSER.
Thanks,
Priyanka
________________________________
From: raviprakash sunkara [mailto:sunkara.raviprakash.feb14@gmail.com]
Sent: Tuesday, March 27, 2007 2:16 PM
To: Priyanka Bhargava (WT01 - IP-Multimedia Carrier & Ent Networks)
Cc: users(a)openser.org
Subject: Re: [Users] Problem configuring the openSER with the DISC
Hello Priyanka,
Diameter and radius both are same purpose.
DialMeter Server never communicate with OpenSER, Vice versa,
So Need the DiaMeter client, Which play the main role to Both openSER or
Diameter,
U problem in Diameter Clinet and server Configuration,
-UA -------->OpenSER-->DiameterClient ---> Diameter Server.
in DiC u should configured the authentation, where the Server is
located.
I'm Using the Radius for AAA,
Thanks & Regards
Sunkara Ravi Prakash
Hyd.....
On 3/27/07, priyanka.bhargava(a)wipro.com < priyanka.bhargava(a)wipro.com>
wrote:
Hi All,
I'm trying use to Diameter Server Client (DISC) for the authentication
purpose (using the auth_diameter module). But I'm facing issues while
creating a connection between openSER and DISC. The diameter client does
not accept the connection from the openSER.
Please let me know if somebody has tried this out and can pass me the
config files and the code changes if any.
Thanks,
Priyanka
The information contained in this electronic message and any attachments
to this message are intended for the exclusive use of the addressee(s)
and may contain proprietary, confidential or privileged information. If
you are not the intended recipient, you should not disseminate,
distribute or copy this e-mail. Please notify the sender immediately and
destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient
should check this email and any attachments for the presence of viruses.
The company accepts no liability for any damage caused by any virus
transmitted by this email.
www.wipro.com
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
--
Thanks and Regards
Ravi Prakash Sunkara
ravi.sunkara(a)hyperion-tech.com
M:+91 9985077535
www.hyperion-tech.com
Client and Parent company :- www.august-networks.com
The information contained in this electronic message and any attachments to this message
are intended for the exclusive use of the addressee(s) and may contain proprietary,
confidential or privileged information. If you are not the intended recipient, you should
not disseminate, distribute or copy this e-mail. Please notify the sender immediately and
destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this
email and any attachments for the presence of viruses. The company accepts no liability
for any damage caused by any virus transmitted by this email.
www.wipro.com
12:57 p.m.
New subject: [Users] Problem configuring the openSER with the DISC
I start openSER there are no errors (i.e. the auth_diameter module
loads), but the DISC client complains that the peer is unknown. Both
SER and the DISC client are running on the same machine, so I added
aaa://localhost as a peer, but that does not seem to help. Looking at
a tcpdump output it shows that SER is trying to contact the DISC
client from a range of ports but is never successful
The above mentioned problem was reported by somebody sometime back
(found it on openser.org), it is the same problem what I'm facing now.
Does anybody have a solution for this?
________________________________
From: raviprakash sunkara [mailto:sunkara.raviprakash.feb14@gmail.com]
Sent: Tuesday, March 27, 2007 2:16 PM
To: Priyanka Bhargava (WT01 - IP-Multimedia Carrier & Ent Networks)
Cc: users(a)openser.org
Subject: Re: [Users] Problem configuring the openSER with the DISC
Hello Priyanka,
Diameter and radius both are same purpose.
DialMeter Server never communicate with OpenSER, Vice versa,
So Need the DiaMeter client, Which play the main role to Both openSER or
Diameter,
U problem in Diameter Clinet and server Configuration,
-UA -------->OpenSER-->DiameterClient ---> Diameter Server.
in DiC u should configured the authentation, where the Server is
located.
I'm Using the Radius for AAA,
Thanks & Regards
Sunkara Ravi Prakash
Hyd.....
On 3/27/07, priyanka.bhargava(a)wipro.com < priyanka.bhargava(a)wipro.com>
wrote:
Hi All,
I'm trying use to Diameter Server Client (DISC) for the authentication
purpose (using the auth_diameter module). But I'm facing issues while
creating a connection between openSER and DISC. The diameter client does
not accept the connection from the openSER.
Please let me know if somebody has tried this out and can pass me the
config files and the code changes if any.
Thanks,
Priyanka
The information contained in this electronic message and any attachments
to this message are intended for the exclusive use of the addressee(s)
and may contain proprietary, confidential or privileged information. If
you are not the intended recipient, you should not disseminate,
distribute or copy this e-mail. Please notify the sender immediately and
destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient
should check this email and any attachments for the presence of viruses.
The company accepts no liability for any damage caused by any virus
transmitted by this email.
www.wipro.com
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
--
Thanks and Regards
Ravi Prakash Sunkara
ravi.sunkara(a)hyperion-tech.com
M:+91 9985077535
www.hyperion-tech.com
Client and Parent company :- www.august-networks.com
The information contained in this electronic message and any attachments to this message
are intended for the exclusive use of the addressee(s) and may contain proprietary,
confidential or privileged information. If you are not the intended recipient, you should
not disseminate, distribute or copy this e-mail. Please notify the sender immediately and
destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this
email and any attachments for the presence of viruses. The company accepts no liability
for any damage caused by any virus transmitted by this email.
www.wipro.com
2:27 p.m.
Klaus Darilion a écrit :
The only identifier which is REGISTERed is the current
location of the
SIP client (ipaddress:port). This gets mapped to the SIP AoR (the
user's SIP address).
A user can use several clients concurrently. Then this user will show
up multiple times in the location table - one entry for each SIP client.
Hope this helps - I still don't understand what you want to achieve.
regards
klaus
Bodin Bruno wrote:
> Hi,
> Is it possible to register two (or more) identifiers by user, such as
> phone number, username or service ?
> Thank
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
Hi,
In some steps,
what I do :
step 1. Softphone clients are registered in openser with
authentification (digest etc....)
step 2. Openser use radius to check them (with ldap)
step 3. Openser do save("location") to store softphone address.
What I need :
after step 3, authenticate username, and phone number of client are
usable to call them.
What I don't need :
currently, the username used to call a softphone is the only choice of
this user and this choice isn't limited.
I'm sorry for my poor english, i'm french student.
thank for your help
6461
days inactive
6461
days old
6 comments
4 participants
participants (4)
-
Bodin Bruno -
Klaus Darilion -
priyanka.bhargava＠wipro.com -
raviprakash sunkara