Hi all,
I set up ser + asterisk. Asterisk is registred as gateway@home.net and listen port 5070 (same box). two hard phones are registred as bob@home.net and alice@home.net .
from alice or bob i want to call 01013 to PSTN without success. ser lookup location and aliases and so reply not found thought i set forward ?
Thanks for your help Harry # ----------- global configuration parameters ------------------------
debug=5 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode #debug=7 #fork=no #log_stderror=yes */
check_via=no # (cmd. line: -v) dns= no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.1 alias="home.net" #alias="192.168.0.1" port=5060 children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/uri.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("15")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication if (!www_authorize("home.net", "subscriber")) { www_challenge("home.net", "0"); break; };
save("location"); break; };
# native SIP destinations are handled using our USRLOC DB or ALIASES if (!lookup("location") | !lookup("aliases")) { sl_send_reply("404", "Not Found"); break; };
} else {
t_relay(); };
# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error();
}; # forward to PSTN if (uri=~"sip:01013@home.net") { if (method=="INVITE") { route(1); break; }; };
}
route[1] {
# forward to PSTN if (uri=~"sip:01013@home.net") { if (method=="INVITE") { forward(192.168.0.1, 5070); break; }; };
}
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
what is sip debug on asterisk showing
Iqbal
On 2/24/2005, "harry gaillac" gaillacharry@yahoo.fr wrote:
Hi all,
I set up ser + asterisk. Asterisk is registred as gateway@home.net and listen port 5070 (same box). two hard phones are registred as bob@home.net and alice@home.net .
from alice or bob i want to call 01013 to PSTN without success. ser lookup location and aliases and so reply not found thought i set forward ?
Thanks for your help Harry
# ----------- global configuration parameters
debug=5 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode #debug=7 #fork=no #log_stderror=yes */
check_via=no # (cmd. line: -v) dns= no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.1 alias="home.net" #alias="192.168.0.1" port=5060 children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading
# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/uri.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("15")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication if (!www_authorize("home.net", "subscriber")) { www_challenge("home.net", "0"); break; };
save("location"); break; }; # native SIP destinations are handled using our
USRLOC DB or ALIASES if (!lookup("location") | !lookup("aliases")) { sl_send_reply("404", "Not Found"); break; };
} else {
t_relay(); };
# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error();
}; # forward to PSTN if (uri=~"sip:01013@home.net") { if (method=="INVITE") { route(1); break; }; };
}
route[1] {
# forward to PSTN if (uri=~"sip:01013@home.net") { if (method=="INVITE") { forward(192.168.0.1, 5070); break; }; };
}
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Hi harry,
You have to move the "forward to PSTN" block just before the lookup section.
Best regards, Marian
harry gaillac wrote:
Hi all,
I set up ser + asterisk. Asterisk is registred as gateway@home.net and listen port 5070 (same box). two hard phones are registred as bob@home.net and alice@home.net .
from alice or bob i want to call 01013 to PSTN without success. ser lookup location and aliases and so reply not found thought i set forward ?
Thanks for your help Harry
# ----------- global configuration parameters
debug=5 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode #debug=7 #fork=no #log_stderror=yes */
check_via=no # (cmd. line: -v) dns= no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.1 alias="home.net" #alias="192.168.0.1" port=5060 children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading
# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/group.so" loadmodule "/usr/lib/ser/modules/uri.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("15")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication if (!www_authorize("home.net", "subscriber")) { www_challenge("home.net", "0"); break; };
save("location"); break; }; # native SIP destinations are handled using our
USRLOC DB or ALIASES if (!lookup("location") | !lookup("aliases")) { sl_send_reply("404", "Not Found"); break; };
} else {
t_relay(); };
# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error();
}; # forward to PSTN if (uri=~"sip:01013@home.net") { if (method=="INVITE") { route(1); break; }; };
}
route[1] {
# forward to PSTN if (uri=~"sip:01013@home.net") { if (method=="INVITE") { forward(192.168.0.1, 5070); break; }; };
}
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers