15 Apr
2017
15 Apr
'17
12:01 p.m.
If i call a mobil number:
t: <sip:+4917625251111@sip.heissa.de>.
i get 404, but would expect rewrite to carrier route:
sip:+4917625251111@sip.nexxtmobile.de
Is there a way to print out all variables at this moment?
###########################################################
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# no loose-route, but stateful ACK;
# must be an ACK after a 487
# or e.g. 404 from upstream server
route(RELAY);
exit;
} else {
# ACK without matching transaction ...
ignore and discard
exit;
}
}
sl_send_reply("404", "Not here");
#How to print out all variables in case we reach this line???
exit;
###########################################################
15 Apr
15 Apr
12:17 p.m.
If i call a mobil number:
t: <sip:+4917625251111@sip.heissa.de>.
i get 404, but would expect rewrite to carrier route:
sip:+4917625251111@sip.nexxtmobile.de
Is there a way to print out all variables at this moment?
###########################################################
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# no loose-route, but stateful ACK;
# must be an ACK after a 487
# or e.g. 404 from upstream server
route(RELAY);
exit;
} else {
# ACK without matching transaction ...
ignore and discard
exit;
}
}
sl_send_reply("404", "Not here");
#How to print out all variables in case we reach this line???
exit;
###########################################################
16 Apr
16 Apr
12:34 p.m.
New subject: xlog does not work as expected
Hi all,
if i use xlog (Version 5.0.1) to print out some variables:
xlog("L_NOTICE", "$fU time [$Tf] method ($rm) r-uri ($ru) 2nd via
($hdr(via[1]))\n");
I get:
Apr 16 10:22:51 sip kamailio: DEBUG: <core> [core/route_struct.c:524]:
print_action(): , "L_NOTICE"
Is that the expected result?
Best regards
Georg
12:42 p.m.
New subject: xlog does not work as expected
This sounds like you have debug=3 or higher, and so are seeing debug
statements related to the internals of logging itself, in addition to
the log entry.
I suggest you set debug=2 and try again.
On Sun, Apr 16, 2017 at 12:34:53PM +0200, gh wrote:
Hi all,
if i use xlog (Version 5.0.1) to print out some variables:
xlog("L_NOTICE", "$fU time [$Tf] method ($rm) r-uri ($ru) 2nd via
($hdr(via[1]))\n");
I get:
Apr 16 10:22:51 sip kamailio: DEBUG: <core> [core/route_struct.c:524]:
print_action(): , "L_NOTICE"
Is that the expected result?
Best regards
Georg
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
2:01 p.m.
New subject: xlog does not work as expected
Hi Alex,
thanks but with debug=2 xlog() does not print anything.
It seems in /usr/src/kamailio-5.0.1/src/core/route_struct.c
case ACTIONS_ST work not as expected:
#######################################################
switch(t->val[2].type){
case NOSUBTYPE:
break;
case STRING_ST:
DBG(", \"%s\"", ZSW(t->val[2].u.string));
break;
case NUMBER_ST:
DBG(", %lu",t->val[2].u.number);
break;
case EXPR_ST:
print_expr((struct expr*)t->val[2].u.data);
break;
case ACTIONS_ST:
print_actions((struct action*)t->val[2].u.data);
break;
case SOCKID_ST:
#######################################################
On 16.04.2017 12:42, Alex Balashov wrote:
This sounds like you have debug=3 or higher, and so
are seeing debug
statements related to the internals of logging itself, in addition to
the log entry.
I suggest you set debug=2 and try again.
On Sun, Apr 16, 2017 at 12:34:53PM +0200, gh wrote:
> Hi all,
> if i use xlog (Version 5.0.1) to print out some variables:
> xlog("L_NOTICE", "$fU time [$Tf] method ($rm) r-uri ($ru) 2nd via
> ($hdr(via[1]))\n");
>
> I get:
> Apr 16 10:22:51 sip kamailio: DEBUG: <core> [core/route_struct.c:524]:
> print_action(): , "L_NOTICE"
>
> Is that the expected result?
>
> Best regards
> Georg
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
18 Apr
18 Apr
2:58 p.m.
New subject: xlog does not work as expected
Hello,
again, as written in the previous email, you are looking at the wrong
step, which is happening in the kamailio startup process, as opposite to
runtime processing.
I could bet a lot of money that when xlog() is broken, there will be a
lot of reports from many people.
Have you received sip traffic in kamailio and the xlog was not printing
anything? Just add an xlog() as first line inside 'request_route { ...
}' and you should see it for each request received by kamailio. If not,
be sure you don't have a firewall blocking sip traffic.
Cheers,
Daniel
On 16.04.17 14:01, gh wrote:
Hi Alex,
thanks but with debug=2 xlog() does not print anything.
It seems in /usr/src/kamailio-5.0.1/src/core/route_struct.c
case ACTIONS_ST work not as expected:
#######################################################
switch(t->val[2].type){
case NOSUBTYPE:
break;
case STRING_ST:
DBG(", \"%s\"", ZSW(t->val[2].u.string));
break;
case NUMBER_ST:
DBG(", %lu",t->val[2].u.number);
break;
case EXPR_ST:
print_expr((struct expr*)t->val[2].u.data);
break;
case ACTIONS_ST:
print_actions((struct action*)t->val[2].u.data);
break;
case SOCKID_ST:
#######################################################
On 16.04.2017 12:42, Alex Balashov wrote:
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - May 22-24 (USA) - www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
This sounds like you have debug=3 or higher, and
so are seeing debug
statements related to the internals of logging itself, in addition to
the log entry.
I suggest you set debug=2 and try again.
On Sun, Apr 16, 2017 at 12:34:53PM +0200, gh wrote:
> Hi all,
> if i use xlog (Version 5.0.1) to print out some variables:
> xlog("L_NOTICE", "$fU time [$Tf] method ($rm) r-uri ($ru) 2nd via
> ($hdr(via[1]))\n");
>
> I get:
> Apr 16 10:22:51 sip kamailio: DEBUG: <core> [core/route_struct.c:524]:
> print_action(): , "L_NOTICE"
>
> Is that the expected result?
>
> Best regards
> Georg
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
19 Apr
19 Apr
12:15 p.m.
New subject: xlog does not work as expected
Solved!
Thanks a lot Daniel,
you are right i've placed the xlog at the wrong line in kamailio.cfg.
Cheers,
Georg
Hello,
again, as written in the previous email, you are looking at the wrong
step, which is happening in the kamailio startup process, as opposite to
runtime processing.
I could bet a lot of money that when xlog() is broken, there will be a
lot of reports from many people.
Have you received sip traffic in kamailio and the xlog was not printing
anything? Just add an xlog() as first line inside 'request_route { ...
}' and you should see it for each request received by kamailio. If not,
be sure you don't have a firewall blocking sip traffic.
Cheers,
Daniel
On 16.04.17 14:01, gh wrote:
Hi Alex,
thanks but with debug=2 xlog() does not print anything.
It seems in /usr/src/kamailio-5.0.1/src/core/route_struct.c
case ACTIONS_ST work not as expected:
#######################################################
switch(t->val[2].type){
case NOSUBTYPE:
break;
case STRING_ST:
DBG(", \"%s\"", ZSW(t->val[2].u.string));
break;
case NUMBER_ST:
DBG(", %lu",t->val[2].u.number);
break;
case EXPR_ST:
print_expr((struct expr*)t->val[2].u.data);
break;
case ACTIONS_ST:
print_actions((struct action*)t->val[2].u.data);
break;
case SOCKID_ST:
#######################################################
On 16.04.2017 12:42, Alex Balashov wrote:
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - May 22-24 (USA) - www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
This sounds like you have debug=3 or higher, and
so are seeing debug
statements related to the internals of logging itself, in addition to
the log entry.
I suggest you set debug=2 and try again.
On Sun, Apr 16, 2017 at 12:34:53PM +0200, gh wrote:
> Hi all,
> if i use xlog (Version 5.0.1) to print out some variables:
> xlog("L_NOTICE", "$fU time [$Tf] method ($rm) r-uri ($ru) 2nd via
> ($hdr(via[1]))\n");
>
> I get:
> Apr 16 10:22:51 sip kamailio: DEBUG: <core> [core/route_struct.c:524]:
> print_action(): , "L_NOTICE"
>
> Is that the expected result?
>
> Best regards
> Georg
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
16 Apr
16 Apr
3:37 p.m.
New subject: Kamailio 5.0.0 KEMI Lua event routes
Hi Daniel,
can you give me an example how to use the xlog() function/in an embedded
interpreter via KEMI/ (lua) then i will try to convert my native route
script.
b.t.w
Thanks for KEMI, may be it will make life easier!
19 Apr
19 Apr
11:33 a.m.
New subject: Kamailio 5.0.0 KEMI Lua event routes
Hello,
see next link for a large Lua script for use with Kamailio via kemi:
-
https://github.com/kamailio/kamailio/blob/master/misc/examples/kemi/kamaili…
Cheers,
Daniel
On 16.04.17 15:37, gh wrote:
Hi Daniel,
can you give me an example how to use the xlog() function/in an
embedded interpreter via KEMI/ (lua) then i will try to convert my
native route script.
b.t.w
Thanks for KEMI, may be it will make life easier!
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - May 22-24 (USA) - www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
12:35 p.m.
New subject: Kamailio 5.0.0 KEMI Lua event routes
OK, i see you are using KSR.dbg() instead of xlog.
I will try that.
Cheers,
Georg
Hello,
see next link for a large Lua script for use with Kamailio via kemi:
-
https://github.com/kamailio/kamailio/blob/master/misc/examples/kemi/kamaili…
Cheers,
Daniel
On 16.04.17 15:37, gh wrote:
Hi Daniel,
can you give me an example how to use the xlog() function/in an
embedded interpreter via KEMI/ (lua) then i will try to convert my
native route script.
b.t.w
Thanks for KEMI, may be it will make life easier!
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - May 22-24 (USA) - www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1:24 p.m.
New subject: Kamailio 5.0.0 KEMI Lua and Python
By the way,
in 2012 p2pnext Project was able to earn 19.500.000 Euro,
see:
http://cordis.europa.eu/docs/projects/cnect/7/216217/080/deliverables/001-p…
http://cordis.europa.eu/project/rcn/85326_en.html
one small part of p2pnext was the development of SIP SIMPLE Client SDK.
I think Kamailio should also ask for EU budget because until now it's a
success story :-)
Hello,
see next link for a large Lua script for use with Kamailio via kemi:
-
https://github.com/kamailio/kamailio/blob/master/misc/examples/kemi/kamaili…
Cheers,
Daniel
On 16.04.17 15:37, gh wrote:
Hi Daniel,
can you give me an example how to use the xlog() function/in an
embedded interpreter via KEMI/ (lua) then i will try to convert my
native route script.
b.t.w
Thanks for KEMI, may be it will make life easier!
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - May 22-24 (USA) - www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
18 Apr
18 Apr
2:54 p.m.
New subject: xlog does not work as expected
Hello,
On 16.04.17 12:34, gh wrote:
Hi all,
if i use xlog (Version 5.0.1) to print out some variables:
xlog("L_NOTICE", "$fU time [$Tf] method ($rm) r-uri ($ru) 2nd via
($hdr(via[1]))\n");
I get:
Apr 16 10:22:51 sip kamailio: DEBUG: <core> [core/route_struct.c:524]:
print_action(): , "L_NOTICE"
this is printed at startup, when dumping the
details of loading the
configuration file script.
Your log message should appear when there is SIP traffic processed by
kamailio.
Cheers,
Daniel
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - May 22-24 (USA) - www.asipto.com
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
2584
days inactive
2588
days old
11 comments
4 participants
participants (4)
-
Alex Balashov -
Daniel-Constantin Mierla -
gh -
gh＠heissa.de