Hi! as you said, i have nt initially included record_route. that should be the reason y the server is processing only transaction and not the entire call. and sorry, it is only till the 200 Ok i see the responses going thru the server, after which the uas learn each other's address and directly talk to each other. i have traced the uas and i see the bye. but now i have included record_route function in both the INVITE and the BYE code block. still the bye is not going thru the proxy. also when the invite is routed from the proxy to the called UA, i dont see the record_route header in the invite. is any other module needed to be loaded other than mediaproxy for the bye to work? Please let me know.....
Thanks a lot for your help, Padmaja
----- Original Message ----- From: fredler@ycn.com To: "Padmaja RV" padmaja.rv@vodcalabs.com Cc: users@openser.org Sent: Tuesday, June 06, 2006 5:35 PM Subject: Re: [Users] cant see Bye when the call is diconnected
i have openser running and supports authentication and calling,. i made calls and verified that the media session is established both ways. now if i disconnect the call, i cant see the BYE request sent. in the ethereal i dont see any call related messages after ACK is sent for the INVITE. please help me.....
I think you did not set "record-route" in your cfg. But than you also should not see ACK.
Are you able to trace on you User Agent? Than you would see where BYE is sent.
regards Franz
Hi,
be sure you script will hit the record_route() function when processing the INVITE (place some xlog in the script to debug it). You need the RR module for this.
regards, bogdan
Padmaja RV wrote:
Hi! as you said, i have nt initially included record_route. that should be the reason y the server is processing only transaction and not the entire call. and sorry, it is only till the 200 Ok i see the responses going thru the server, after which the uas learn each other's address and directly talk to each other. i have traced the uas and i see the bye. but now i have included record_route function in both the INVITE and the BYE code block. still the bye is not going thru the proxy. also when the invite is routed from the proxy to the called UA, i dont see the record_route header in the invite. is any other module needed to be loaded other than mediaproxy for the bye to work? Please let me know.....
Thanks a lot for your help, Padmaja
----- Original Message ----- From: fredler@ycn.com To: "Padmaja RV" padmaja.rv@vodcalabs.com Cc: users@openser.org Sent: Tuesday, June 06, 2006 5:35 PM Subject: Re: [Users] cant see Bye when the call is diconnected
i have openser running and supports authentication and calling,. i made calls and verified that the media session is established both ways. now if i disconnect the call, i cant see the BYE request sent. in the ethereal i dont see any call related messages after ACK is sent for the INVITE. please help me.....
I think you did not set "record-route" in your cfg. But than you also should not see ACK.
Are you able to trace on you User Agent? Than you would see where BYE is sent.
regards Franz
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-
Bogdan-Andrei Iancu -
Padmaja RV