hi all, Currently i was trying to test SER under load conditions. At the load of just 10 simultaneous calls, the following error occured.
"ERROR: forward_reply: no 2nd via found in reply"
Note: Sometimes the error occured after 100-110 call and sometime it goes upto 1000 calls..
Can anybody help me in this issue....
regds, Piyush Bansal
In case you're using SER as a proxy, when it receives a request from upstream the message must contain already a Via; as it forwards the request downstream, it adds another Via/Via body, pointing to itself. When the reply comes from downstream, it must, thus, contain at least 2 Vias. Otherwise, the error is printed (and could indicate a broken/misconfigured downstream element).
WL.
On 8/4/07, Piyush.Bansal@relianceada.com Piyush.Bansal@relianceada.com wrote:
hi all, Currently i was trying to test SER under load conditions. At the load of just 10 simultaneous calls, the following error occured.
*"ERROR: forward_reply: no 2nd via found in reply*"
Note: Sometimes the error occured after 100-110 call and sometime it goes upto 1000 calls..
Can anybody help me in this issue....
regds, Piyush Bansal _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers