27 Aug
2010
27 Aug
'10
2:12 a.m.
Hi,
I'm still disapointed after reading the documentation of LCR module.
I use SER 0.9.9 and I'm wondering if it's possible to use LCR based on
destination prefix ?
I mean that if I call 056XXXXX I want to use GW1. For 06XXXX I want to
use GW2, etc.
Thank you for your opinion.
Regards,
Adrien
27 Aug
27 Aug
2:04 a.m.
inge writes:
I'm still disapointed after reading the
documentation of LCR module.
I use SER 0.9.9 and I'm wondering if it's possible to use LCR based on
destination prefix ?
I mean that if I call 056XXXXX I want to use GW1. For 06XXXX I want to
use GW2, etc.
upgrade to sr 3.0 and what you want to do in above is possible.
-- juha
2:18 a.m.
No, but custom DB logic can be enacted to make this happen relatively
easily. You will probably want a newer version of SER, though.
On 08/26/2010 12:12 PM, inge wrote:
Hi,
I'm still disapointed after reading the documentation of LCR module.
I use SER 0.9.9 and I'm wondering if it's possible to use LCR based on
destination prefix ?
I mean that if I call 056XXXXX I want to use GW1. For 06XXXX I want to
use GW2, etc.
Thank you for your opinion.
Regards,
Adrien
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov - Principal
Evariste Systems LLC
1170 Peachtree Street
12th Floor, Suite 1200
Atlanta, GA 30309
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/
2:25 a.m.
On Thursday 26 August 2010, inge wrote:
I'm still disapointed after reading the
documentation of LCR module.
I use SER 0.9.9 and I'm wondering if it's possible to use LCR based on
destination prefix ?
I mean that if I call 056XXXXX I want to use GW1. For 06XXXX I want to
use GW2, etc.
Hi inge,
the lcr in newer kamailio/ sip-router is much more powerfull, have you looked
into this README as well? Maybe you also want to take a look to the
carrierroute module, which supports prefix based routing, also the drouting
module I think supports this.
Cheers,
Henning
2:35 a.m.
Thanks all for your answers.
It's not so simple to update and bring the configuration into sr3 config
file.
But this is a supplementary argument in favor of this update.
Thanks.
Le jeudi 26 août 2010 à 18:25 +0200, Henning Westerholt a écrit :
On Thursday 26 August 2010, inge wrote:
I'm still disapointed after reading the
documentation of LCR module.
I use SER 0.9.9 and I'm wondering if it's possible to use LCR based on
destination prefix ?
I mean that if I call 056XXXXX I want to use GW1. For 06XXXX I want to
use GW2, etc.
Hi inge,
the lcr in newer kamailio/ sip-router is much more powerfull, have you looked
into this README as well? Maybe you also want to take a look to the
carrierroute module, which supports prefix based routing, also the drouting
module I think supports this.
Cheers,
Henning
5257
days inactive
5257
days old
4 comments
4 participants
participants (4)
-
Alex Balashov -
Henning Westerholt -
inge -
Juha Heinanen