22 Feb
2007
22 Feb
'07
9:46 a.m.
All,
I've finished the first version of sip:wizard, an online SER/OpenSER
configuration generator: http://www.sipwise.com/wizard
Currently, support for OpenSER 1.1 is available. In the future, also new
OpenSER releases as well as SER will be supported.
At the moment, we have config features for basic routing, far-end NAT
traversal, ENUM and PSTN in place. This will also be extended, depending
on suggestions from you, the users.
I hope you'll find it useful. Feedback is of course very much appreciated.
Cheers,
Andreas
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
22 Feb
22 Feb
10:23 a.m.
Congrulations,
It is a great job.
Hakan.
----- Original Message -----
From: "Andreas Granig" <andreas.granig(a)inode.info>
To: <users(a)openser.org>
Sent: Thursday, February 22, 2007 4:46 PM
Subject: [Users] OpenSER Configuration Generator
All,
I've finished the first version of sip:wizard, an online SER/OpenSER
configuration generator: http://www.sipwise.com/wizard
Currently, support for OpenSER 1.1 is available. In the future, also new
OpenSER releases as well as SER will be supported.
At the moment, we have config features for basic routing, far-end NAT
traversal, ENUM and PSTN in place. This will also be extended, depending
on suggestions from you, the users.
I hope you'll find it useful. Feedback is of course very much appreciated.
Cheers,
Andreas
This e-mail is confidential and may well also be legally privileged. If
you have received it in error, you are on notice of its status. Please
notify us immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose
its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
10:34 a.m.
It's definetely more than useful!!!!! no more typos in config....
Just thank you!
Samuel.
2007/2/22, Hakan YASTI <hakanyasti(a)gmail.com>om>:
Congrulations,
It is a great job.
Hakan.
----- Original Message -----
From: "Andreas Granig" <andreas.granig(a)inode.info>
To: <users(a)openser.org>
Sent: Thursday, February 22, 2007 4:46 PM
Subject: [Users] OpenSER Configuration Generator
All,
I've finished the first version of sip:wizard, an online SER/OpenSER
configuration generator: http://www.sipwise.com/wizard
Currently, support for OpenSER 1.1 is available. In the future, also new
OpenSER releases as well as SER will be supported.
At the moment, we have config features for basic routing, far-end NAT
traversal, ENUM and PSTN in place. This will also be extended, depending
on suggestions from you, the users.
I hope you'll find it useful. Feedback is of course very much appreciated.
Cheers,
Andreas
This e-mail is confidential and may well also be legally privileged. If
you have received it in error, you are on notice of its status. Please
notify us immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose
its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
11:31 a.m.
The tools looks nice. I'm sure will be very appreciated. Thanks!
Looking forward for support of OpenSER 1.2.0 there :-) ...
Cheers,
Daniel
On 02/22/07 16:46, Andreas Granig wrote:
All,
I've finished the first version of sip:wizard, an online SER/OpenSER
configuration generator: http://www.sipwise.com/wizard
Currently, support for OpenSER 1.1 is available. In the future, also
new OpenSER releases as well as SER will be supported.
At the moment, we have config features for basic routing, far-end NAT
traversal, ENUM and PSTN in place. This will also be extended,
depending on suggestions from you, the users.
I hope you'll find it useful. Feedback is of course very much
appreciated.
Cheers,
Andreas
This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status.
Please notify us immediately by reply e-mail and then delete this
message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could
be a breach of confidence. Thank you for your cooperation.
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
12:19 p.m.
Andreas Granig wrote:
Feedback is of course very much appreciated.
One thing I noticed thus far. When selecting the MediaProxy option,
why do all of the rtpproxy options get set?
modparam("nathelper", "rtpproxy_sock",
"unix:/var/run/rtpproxy.sock")
modparam("nathelper", "rtpproxy_disable", 1)
modparam("nathelper", "rtpproxy_disable_tout", 60)
modparam("nathelper", "rtpproxy_tout", 1)
modparam("nathelper", "rtpproxy_retr", 5)
Seems like all one really needs, when using mediaproxy would be:
modparam("nathelper", "rtpproxy_disable", 1)
Also, other configuration examples I have seen use the nathelper
natping_interval to assist in those particular nasty NAT/Firewall
configurations.
modparam("nathelper", "natping_interval", 180)
Overall your tool generates a very detailed configurations that should,
at the very least, educate more people on how to properly configure OpenSER.
Thank you for this great tool.
Jeremy McNamara
12:32 p.m.
Hi Jeremy,
One thing I noticed thus far. When selecting the
MediaProxy option,
why do all of the rtpproxy options get set?
Well, it uses nathelper-module for nat_uac_test(), fix_nated_contact()
and fix_nated_register(). And as soon as a module is used, all its
config parameters show up in the config. This may be fixed in the
future, but there are more important things on my TODO list ;o)
Also, other configuration examples I have seen use the
nathelper
natping_interval to assist in those particular nasty NAT/Firewall
configurations.
modparam("nathelper", "natping_interval", 180)
This will only be set (to 60), if you choose to use rtpproxy. For
mediaproxy, the following parameter is set:
modparam("mediaproxy", "natping_interval", 60)
Cheers,
Andreas
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
12:31 p.m.
That's indeed very nice. Can't await ottendorf support.
Are you planning to disclose the underlying software or
is it going to be service-only option?
Thanks!
-jiri
At 15:46 22/02/2007, Andreas Granig wrote:
All,
I've finished the first version of sip:wizard, an online SER/OpenSER configuration
generator: http://www.sipwise.com/wizard
Currently, support for OpenSER 1.1 is available. In the future, also new OpenSER releases
as well as SER will be supported.
At the moment, we have config features for basic routing, far-end NAT traversal, ENUM and
PSTN in place. This will also be extended, depending on suggestions from you, the users.
I hope you'll find it useful. Feedback is of course very much appreciated.
Cheers,
Andreas
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
--
Jiri Kuthan http://iptel.org/~jiri/
12:40 p.m.
Hi Jiri,
Jiri Kuthan wrote:
That's indeed very nice. Can't await ottendorf
support.
Are you planning to disclose the underlying software or
is it going to be service-only option?
I'll start integrating ottendorf and OpenSER 1.2 as soon as they are
officially released.
There are currently no plans to disclose the software, though.
Cheers,
Andreas
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
1:05 p.m.
Don't know the underlying software for this particular website, but
you can do sort of a similar job by using m4. I'm using a tokenized
openser.m4 config file wich is controlled by a config.m4 file in order
to generate my final openser.cfg.
In other words, I have a monstrous openser.m4 that will be m4-ized to
generate the final openser.cfg.
Anyway, the site is very helpful :-)
Excellent job Andreas!
Regards,
Ovidiu Sas
On 2/22/07, Jiri Kuthan <jiri(a)iptel.org> wrote:
That's indeed very nice. Can't await ottendorf
support.
Are you planning to disclose the underlying software or
is it going to be service-only option?
Thanks!
-jiri
At 15:46 22/02/2007, Andreas Granig wrote:
All,
I've finished the first version of sip:wizard, an online SER/OpenSER configuration
generator: http://www.sipwise.com/wizard
Currently, support for OpenSER 1.1 is available. In the future, also new OpenSER releases
as well as SER will be supported.
At the moment, we have config features for basic routing, far-end NAT traversal, ENUM and
PSTN in place. This will also be extended, depending on suggestions from you, the users.
I hope you'll find it useful. Feedback is of course very much appreciated.
Cheers,
Andreas
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
--
Jiri Kuthan http://iptel.org/~jiri/
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
6310
days inactive
6310
days old
8 comments
7 participants
participants (7)
-
Andreas Granig -
Daniel-Constantin Mierla -
Hakan YASTI -
Jeremy McNamara -
Jiri Kuthan -
Ovidiu Sas -
samuel