Hi All
I have the following setup
X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same server <- exodus XMPP client
I have enabled presence on the Openser server this allowed me to chat using the Openser server. The next step was to use the XMPP GW module to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client.
I added test2 to the x-lite client and chose send instant message, the x-lite client immediately returned "Error: Your contact is not online." The Openser logs return the following:
Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message
Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff
Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff
My Config is below:
Hello,
On 02/04/08 17:23, Ali Jawad wrote:
Hi All
I have the following setup
X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same server <- exodus XMPP client
I have enabled presence on the Openser server this allowed me to chat using the Openser server. The next step was to use the XMPP GW module to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client.
I added test2 to the x-lite client and chose send instant message, the x-lite client immediately returned “*Error: *Your contact is not online.” The Openser logs return the following:
Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message
Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff
Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff
My Config is below:
can you grab the network trace of the SIP MESSAGE?
Cheers, Daniel
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Here you go
Thanks for your help.
-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Monday, February 04, 2008 5:30 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
Hello,
On 02/04/08 17:23, Ali Jawad wrote:
Hi All
I have the following setup
X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same server <- exodus XMPP client
I have enabled presence on the Openser server this allowed me to chat using the Openser server. The next step was to use the XMPP GW module to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client.
I added test2 to the x-lite client and chose send instant message, the
x-lite client immediately returned "*Error: *Your contact is not online." The Openser logs return the following:
Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message
Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff
Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff
My Config is below:
can you grab the network trace of the SIP MESSAGE?
Cheers, Daniel
------------------------------------------------------------------------
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Hello,
On 02/04/08 17:41, Ali Jawad wrote:
Here you go
Thanks for your help.
thanks, eyebeam follows Indication of Message Composition for Instant Messaging RFC: http://www.rfc-editor.org/rfc/rfc3994.txt
It is why the first message has content type: application/im-iscomposing+xml
The second is the message in the text/html format.
To be compliant with the RFC, as openser simple-xmpp gateway does not support rfc3994 so far, you should add in your config:
if(is for xmpp gateway) { if($hdr(Content-Type)=="application/im-iscomposing+xml") { sl_send_reply("415", "Unsupported Media Type"); exit; } }
I will check quickly to see if I can send you a patch to support text/html content type. Otherwise, 415 should be sent back to any message that has content type other than text/plain.
Cheers, Daniel
-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Monday, February 04, 2008 5:30 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
Hello,
On 02/04/08 17:23, Ali Jawad wrote:
Hi All
I have the following setup
X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same server <- exodus XMPP client
I have enabled presence on the Openser server this allowed me to chat using the Openser server. The next step was to use the XMPP GW module to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client.
I added test2 to the x-lite client and chose send instant message, the
x-lite client immediately returned "*Error: *Your contact is not online." The Openser logs return the following:
Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message
Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff
Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff
My Config is below:
can you grab the network trace of the SIP MESSAGE?
Cheers, Daniel
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Dear Daniel
Thank you for your help so far. I would like to know if this limits my capabilites to communicate with my XMPP server, does this mean that I can not send Arabic IMs and other advanced features of XMPP ?
Thank you. -----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Monday, February 04, 2008 6:02 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
Hello,
On 02/04/08 17:41, Ali Jawad wrote:
Here you go
Thanks for your help.
thanks, eyebeam follows Indication of Message Composition for Instant Messaging RFC: http://www.rfc-editor.org/rfc/rfc3994.txt
It is why the first message has content type: application/im-iscomposing+xml
The second is the message in the text/html format.
To be compliant with the RFC, as openser simple-xmpp gateway does not support rfc3994 so far, you should add in your config:
if(is for xmpp gateway) { if($hdr(Content-Type)=="application/im-iscomposing+xml") { sl_send_reply("415", "Unsupported Media Type"); exit; } }
I will check quickly to see if I can send you a patch to support text/html content type. Otherwise, 415 should be sent back to any message that has content type other than text/plain.
Cheers, Daniel
-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Monday, February 04, 2008 5:30 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
Hello,
On 02/04/08 17:23, Ali Jawad wrote:
Hi All
I have the following setup
X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same
server <- exodus XMPP client
I have enabled presence on the Openser server this allowed me to chat
using the Openser server. The next step was to use the XMPP GW module
to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client.
I added test2 to the x-lite client and chose send instant message,
the
x-lite client immediately returned "*Error: *Your contact is not online." The Openser logs return the following:
Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message
Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff
Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff
My Config is below:
can you grab the network trace of the SIP MESSAGE?
Cheers, Daniel
------------------------------------------------------------------------
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Hello Ali,
On 02/04/08 18:07, Ali Jawad wrote:
Dear Daniel
Thank you for your help so far. I would like to know if this limits my capabilites to communicate with my XMPP server, does this mean that I can not send Arabic IMs and other advanced features of XMPP ?
by definition, a gateway introduces limitation. Practically it can do translation of a message if it is an equivalent in the other protocol. For sure there are some advanced XMPP features that are not in SIP/SIMPLE (yet).
I need a SIP capture of an Arabic IM to let you know if is possible now/how difficult is to be implemented. I guess it is going to be UTF8 encoding or so.
Cheers, Daniel
Thank you. -----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Monday, February 04, 2008 6:02 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
Hello,
On 02/04/08 17:41, Ali Jawad wrote:
Here you go
Thanks for your help.
thanks, eyebeam follows Indication of Message Composition for Instant Messaging RFC: http://www.rfc-editor.org/rfc/rfc3994.txt
It is why the first message has content type: application/im-iscomposing+xml
The second is the message in the text/html format.
To be compliant with the RFC, as openser simple-xmpp gateway does not support rfc3994 so far, you should add in your config:
if(is for xmpp gateway) { if($hdr(Content-Type)=="application/im-iscomposing+xml") { sl_send_reply("415", "Unsupported Media Type"); exit; } }
I will check quickly to see if I can send you a patch to support text/html content type. Otherwise, 415 should be sent back to any message that has content type other than text/plain.
Cheers, Daniel
-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Monday, February 04, 2008 5:30 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
Hello,
On 02/04/08 17:23, Ali Jawad wrote:
Hi All
I have the following setup
X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same
server <- exodus XMPP client
I have enabled presence on the Openser server this allowed me to chat
using the Openser server. The next step was to use the XMPP GW module
to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client.
I added test2 to the x-lite client and chose send instant message,
the
x-lite client immediately returned "*Error: *Your contact is not online." The Openser logs return the following:
Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message
Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff
Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff
My Config is below:
can you grab the network trace of the SIP MESSAGE?
Cheers, Daniel
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Hello,
I have checked the simple-xmpp draft, and for html body, the gateway have to convert the message in xhtml and then send it to xmpp world. http://tools.ietf.org/html/draft-saintandre-xmpp-simple-10#section-6
It is not that quick to add. Alternative would be to extract the text from html and sent then to xmpp. I do not know if there is such c library that can do it on linux/unix.
Cheers, Daniel
On 02/04/08 18:07, Ali Jawad wrote:
Dear Daniel
Thank you for your help so far. I would like to know if this limits my capabilites to communicate with my XMPP server, does this mean that I can not send Arabic IMs and other advanced features of XMPP ?
Thank you. -----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Monday, February 04, 2008 6:02 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
Hello,
On 02/04/08 17:41, Ali Jawad wrote:
Here you go
Thanks for your help.
thanks, eyebeam follows Indication of Message Composition for Instant Messaging RFC: http://www.rfc-editor.org/rfc/rfc3994.txt
It is why the first message has content type: application/im-iscomposing+xml
The second is the message in the text/html format.
To be compliant with the RFC, as openser simple-xmpp gateway does not support rfc3994 so far, you should add in your config:
if(is for xmpp gateway) { if($hdr(Content-Type)=="application/im-iscomposing+xml") { sl_send_reply("415", "Unsupported Media Type"); exit; } }
I will check quickly to see if I can send you a patch to support text/html content type. Otherwise, 415 should be sent back to any message that has content type other than text/plain.
Cheers, Daniel
-----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Monday, February 04, 2008 5:30 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
Hello,
On 02/04/08 17:23, Ali Jawad wrote:
Hi All
I have the following setup
X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same
server <- exodus XMPP client
I have enabled presence on the Openser server this allowed me to chat
using the Openser server. The next step was to use the XMPP GW module
to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client.
I added test2 to the x-lite client and chose send instant message,
the
x-lite client immediately returned "*Error: *Your contact is not online." The Openser logs return the following:
Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message
Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff
Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff
My Config is below:
can you grab the network trace of the SIP MESSAGE?
Cheers, Daniel
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Hi Ali,
the xmpp module, for messaging, supports only test/plain and message/cpim content types. But xlite is sending messages html embedded (its on extension), with a different content-type, which is not supported by openser.
Regards, Bogdan
Ali Jawad wrote:
Hi All
I have the following setup
X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same server <- exodus XMPP client
I have enabled presence on the Openser server this allowed me to chat using the Openser server. The next step was to use the XMPP GW module to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client.
I added test2 to the x-lite client and chose send instant message, the x-lite client immediately returned “*Error: *Your contact is not online.” The Openser logs return the following:
Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message
Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff
Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff
My Config is below:
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Dear Bogdan
Does that mean that I can not use the Arabic for chatting through the xmpp gw module and I can not use other advanced features of xmpp ? -----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Monday, February 04, 2008 5:39 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
Hi Ali,
the xmpp module, for messaging, supports only test/plain and message/cpim content types. But xlite is sending messages html embedded (its on extension), with a different content-type, which is not supported by openser.
Regards, Bogdan
Ali Jawad wrote:
Hi All
I have the following setup
X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same server <- exodus XMPP client
I have enabled presence on the Openser server this allowed me to chat using the Openser server. The next step was to use the XMPP GW module to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client.
I added test2 to the x-lite client and chose send instant message, the
x-lite client immediately returned "*Error: *Your contact is not online." The Openser logs return the following:
Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message
Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff
Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff
My Config is below:
------------------------------------------------------------------------
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Hi Ali,
In the current format of the module, I would say no.
Regards, Bogdan
Ali Jawad wrote:
Dear Bogdan
Does that mean that I can not use the Arabic for chatting through the xmpp gw module and I can not use other advanced features of xmpp ? -----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Monday, February 04, 2008 5:39 PM To: Ali Jawad Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
Hi Ali,
the xmpp module, for messaging, supports only test/plain and message/cpim content types. But xlite is sending messages html embedded (its on extension), with a different content-type, which is not supported by openser.
Regards, Bogdan
Ali Jawad wrote:
Hi All
I have the following setup
X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same server <- exodus XMPP client
I have enabled presence on the Openser server this allowed me to chat using the Openser server. The next step was to use the XMPP GW module to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client.
I added test2 to the x-lite client and chose send instant message, the
x-lite client immediately returned "*Error: *Your contact is not online." The Openser logs return the following:
Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message
Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff
Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff
My Config is below:
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
-
Ali Jawad -
Bogdan-Andrei Iancu -
Daniel-Constantin Mierla