Hi all, I'm trying to configure jabber module in OpenSER and this is what I get when sending a message from Ekiga to a Jabber user: "0(26030) XJAB:xj_jcon_connect: socket [7] 0(26030) XJAB:xj_worker: auth to jabber as: [teste2] / [xxx] 0(26030) XJAB:xj_worker:26154: Authentication to the Jabber server failed ... 0(26030) XJAB:xj_jcon_disconnect: -----START----- 0(26030) XJAB:xj_jcon_disconnect: socket [7] 0(26030) XJAB:xj_jcon_send_presence: -----START----- 0(26030) INFO: signal 13 received 0(26030) XJAB:xj_jcon_send_presence: Error - presence not sent 0(26030) INFO: signal 13 received 0(26030) XJAB:xj_jcon_disconnect: error closing stream 0(26030) XJAB:xj_jcon_disconnect: -----END----- " "jusers" table has only one entry: juid => 1 jab_id => teste2 jab_passwd => teste2 sip_id => sip:teste2@voip.mydomain ( This is the Ekiga user) type => 0 "openser.cfg" modparam("jabber", "db_url","postgres://openseruser:mypass@192.168.95.78/sip_jab") modparam("jabber", "jaddress", "192.168.95.135") modparam("jabber", "jport", 5222) modparam("jabber", "jdomain", "xmpp.mydomain=*") modparam("jabber", "registrar", "jabber_gateway(a)127.0.0.1") modparam("jabber", "workers", 2) modparam("jabber", "max_jobs", 10) modparam("jabber", "cache_time", 600) modparam("jabber", "delay_time", 90) modparam("jabber", "sleep_time", 20) modparam("jabber", "check_time", 20) Any sugestion? Thanks Vanderson.