Hello,

if you provide -c as command line parameter, the line number where an error is detected should be printed.

On the other hand, for sure when building and installing Kamailio flavour with custom installation path, the modules' path in default configuration file should be updated:

http://www.kamailio.org/wiki/install/3.2.x/git#tuning_makefiles

You don't have to do anything anymore, I was using it a lot like this -- if got broken somehow, it has to be fixed.

Cheers, Daniel

On 4/7/12 11:04 PM, Daniel Gonzalez wrote:

Thanks Alex,

In my case it is ser.cfg, not kamilio.cfg.

I have made a single correction: I have changed this:

# ------------------ module loading ----------------------------------

#!ifdef LOCAL_TEST_RUN loadpath "modules:modules_s" #!else loadpath "/usr/lib/ser/modules:/usr/lib/ser/modules_s" #!endif

To this:

# ------------------ module loading ----------------------------------

#!ifdef LOCAL_TEST_RUN loadpath "modules:modules_s" #!else loadpath "/tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s" #!endif

And the situation has improved. I have gone from:

» /tmp/my/very/strange/path/sbin/ser loading modules under /usr/lib/ser/modules:/usr/lib/ser/modules_s ERROR: bad config file (34 errors)

To:

» /tmp/my/very/strange/path/sbin/ser loading modules under /tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s ERROR: bad config file (2 errors)

But still two errors, which I can not find. How can I tell the ser binary to help me with pinpointing the errors? I have tried to start with -ddd, but it has not helped.

By the way, the other configuration files are:

etc/ `-- ser |-- dictionary.sip-router |-- ser-advanced.cfg |-- ser-basic.cfg `-- ser.cfg

And they seem to be fine. There was a correct reference to the right installation path in ser-basic.cfg:

# ------------------ module loading ----------------------------------

#!ifdef LOCAL_TEST_RUN loadpath "modules:modules_s" #!else loadpath "/tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s" #!endif

On Sat, Apr 7, 2012 at 9:54 PM, Alex Balashovabalashov@evaristesys.com wrote:

...

The prefix only specifies the destination for the build targets. As far as things like module paths, they are not affected. You will have to change them manually in kamailio.cfg. However, the good news is that there aren't a whole lot of paths to change; you really only need to change it in kamailio,cfg, and in any init scripts.

-- Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de Leon Ave Suite 106 Decatur, GA 30030 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/, http://www.alexbalashov.com

Daniel Gonzalezgonvaled@gonvaled.com wrote:

...

Hello,

This is my first message to this list.

I have installed sip-router as follows (my system is Ubuntu 10.04):

 cd /tmp
 git clone --depth 1 git://git.sip-router.org/sip-router sip-router
 cd sip-router
 git checkout -b 3.1 origin/3.1
 local prefix=/tmp/my/very/strange/path
 mkdir -p $prefix
 sudo apt-get install -y flex
 sudo apt-get install -y docbook2x
 make proper
 make cfg     prefix=$prefix
 make all     prefix=$prefix
 make install prefix=$prefix

And this has worked as expected.

Now I try to start the daemon:

$ /tmp/my/very/strange/path/sbin/ser
loading modules under /usr/lib/ser/modules:/usr/lib/ser/modules_s

What can I do so that my non-standard path is fully recognized by all sip router tools?

Thanks, Daniel Gonzalez

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Hello,

mysql and xmlrpc modules are not installed by default, since they depend on external libraries, like libmysqlclient-dev and libxml2-dev (see the readmes of the modules for more accurate info). Once you install them, just do:

make include_modules="db_mysql xmlrpc" install

Cheers, Daniel

On 4/9/12 9:54 PM, Daniel Gonzalez wrote:

Thanks, this helped. It seems I am missing something related to mysql and xmlrpc.

» /tmp/my/very/strange/path/sbin/ser -c loading modules under /tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s 0(9747) ERROR:<core> [sr_module.c:511]: ERROR: load_module: could not find module<db_mysql> in </tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s> 0(9747) :<core> [cfg.y:3416]: parse error in config file /tmp/my/very/strange/path/etc/ser/ser.cfg, line 95, column 12-21: failed to load module 0(9747) ERROR:<core> [sr_module.c:511]: ERROR: load_module: could not find module<xmlrpc> in </tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s> 0(9747) :<core> [cfg.y:3416]: parse error in config file /tmp/my/very/strange/path/etc/ser/ser.cfg, line 115, column 12-19: failed to load module ERROR: bad config file (2 errors)

And this happens with a standard install: I have not requested anything related to mysql. This is the script I am using to install ser:

install_sip_ser_ ( ) { cd /tmp git clone --depth 1 git://git.sip-router.org/sip-router sip-router cd sip-router git checkout -b 3.1 origin/3.1 local prefix=/tmp/my/very/strange/path mkdir -p $prefix sudo apt-get install -y flex sudo apt-get install -y docbook2x make proper make cfg prefix=$prefix make all prefix=$prefix make install prefix=$prefix }

On Mon, Apr 9, 2012 at 11:59 AM, Daniel-Constantin Mierla miconda@gmail.com wrote:

...

Hello,

if you provide -c as command line parameter, the line number where an error is detected should be printed.

On the other hand, for sure when building and installing Kamailio flavour with custom installation path, the modules' path in default configuration file should be updated:

http://www.kamailio.org/wiki/install/3.2.x/git#tuning_makefiles

You don't have to do anything anymore, I was using it a lot like this -- if got broken somehow, it has to be fixed.

Cheers, Daniel

On 4/7/12 11:04 PM, Daniel Gonzalez wrote:

...

Thanks Alex,

In my case it is ser.cfg, not kamilio.cfg.

I have made a single correction: I have changed this:

# ------------------ module loading ----------------------------------

#!ifdef LOCAL_TEST_RUN loadpath "modules:modules_s" #!else loadpath "/usr/lib/ser/modules:/usr/lib/ser/modules_s" #!endif

To this:

# ------------------ module loading ----------------------------------

#!ifdef LOCAL_TEST_RUN loadpath "modules:modules_s" #!else loadpath "/tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s" #!endif

And the situation has improved. I have gone from:

» /tmp/my/very/strange/path/sbin/ser loading modules under /usr/lib/ser/modules:/usr/lib/ser/modules_s ERROR: bad config file (34 errors)

To:

» /tmp/my/very/strange/path/sbin/ser loading modules under /tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s ERROR: bad config file (2 errors)

But still two errors, which I can not find. How can I tell the ser binary to help me with pinpointing the errors? I have tried to start with -ddd, but it has not helped.

By the way, the other configuration files are:

etc/ `-- ser |-- dictionary.sip-router |-- ser-advanced.cfg |-- ser-basic.cfg `-- ser.cfg

And they seem to be fine. There was a correct reference to the right installation path in ser-basic.cfg:

# ------------------ module loading ----------------------------------

#!ifdef LOCAL_TEST_RUN loadpath "modules:modules_s" #!else loadpath "/tmp/my/very/strange/path/lib/ser/modules:/tmp/my/very/strange/path/lib/ser/modules_s" #!endif

On Sat, Apr 7, 2012 at 9:54 PM, Alex Balashovabalashov@evaristesys.com wrote:

...

The prefix only specifies the destination for the build targets. As far as things like module paths, they are not affected. You will have to change them manually in kamailio.cfg. However, the good news is that there aren't a whole lot of paths to change; you really only need to change it in kamailio,cfg, and in any init scripts.

-- Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de Leon Ave Suite 106 Decatur, GA 30030 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/, http://www.alexbalashov.com

Daniel Gonzalezgonvaled@gonvaled.com wrote:

...

Hello,

This is my first message to this list.

I have installed sip-router as follows (my system is Ubuntu 10.04):

 cd /tmp
 git clone --depth 1 git://git.sip-router.org/sip-router sip-router
 cd sip-router
 git checkout -b 3.1 origin/3.1
 local prefix=/tmp/my/very/strange/path
 mkdir -p $prefix
 sudo apt-get install -y flex
 sudo apt-get install -y docbook2x
 make proper
 make cfg     prefix=$prefix
 make all     prefix=$prefix
 make install prefix=$prefix

And this has worked as expected.

Now I try to start the daemon:

$ /tmp/my/very/strange/path/sbin/ser
loading modules under /usr/lib/ser/modules:/usr/lib/ser/modules_s

What can I do so that my non-standard path is fully recognized by all sip router tools?

Thanks, Daniel Gonzalez

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Daniel-Constantin Mierla Kamailio Advanced Training, April 23-26, 2012, Berlin, Germany http://www.asipto.com/index.php/kamailio-advanced-training/