Hey Guys,
I was wondering if anyone knows some Windows Based softphone to do some tests on my Kamailio 1.5.4 deployment that will allow insertion of custom headers or at least Remote-Party-ID and/or P-Asserted-Identity.
Thanks in advance, Uriel
2010/11/23 Uriel Rozenbaum uriel.rozenbaum@gmail.com:
Hey Guys,
I was wondering if anyone knows some Windows Based softphone to do some tests on my Kamailio 1.5.4 deployment that will allow insertion of custom headers or at least Remote-Party-ID and/or P-Asserted-Identity.
A softphone is never a trusted node so it should NEVER append those headers (and the proxy should ignore and delete them if present).
On 23.11.2010 19:58, Uriel Rozenbaum wrote:
Hey Guys,
I was wondering if anyone knows some Windows Based softphone to do some tests on my Kamailio 1.5.4 deployment that will allow insertion of custom headers or at least Remote-Party-ID and/or P-Asserted-Identity.
Not the answer you want to hear - I always use another Kamailio which just acts as a relay and inserts the headers (the using the Kamilio default config and append_hf in RELAY route) and then configure this proxy as outboundproxy in the client.
regards Klaus
:) I know is not the answer I expected, but I'll do something like that, maybe use sipp or sipsak.
Thanks! Uriel
On Wed, Nov 24, 2010 at 5:40 AM, Klaus Darilion klaus.mailinglists@pernau.at wrote:
On 23.11.2010 19:58, Uriel Rozenbaum wrote:
Hey Guys,
I was wondering if anyone knows some Windows Based softphone to do some tests on my Kamailio 1.5.4 deployment that will allow insertion of custom headers or at least Remote-Party-ID and/or P-Asserted-Identity.
Not the answer you want to hear - I always use another Kamailio which just acts as a relay and inserts the headers (the using the Kamilio default config and append_hf in RELAY route) and then configure this proxy as outboundproxy in the client.
regards Klaus
On 24.11.2010 22:02, Uriel Rozenbaum wrote:
:) I know is not the answer I expected, but I'll do something like that, maybe use sipp or sipsak.
Uriel, sipp or sipsak will do just fine, I've also used SIPp for this particular purpose: http://sipper.agnity.com/ - useful for more complex scenarios too (and I have no relation to the authors whatsoever:)).
Good, I'll try it as well... Thanks!
On Wed, Nov 24, 2010 at 5:04 PM, Andrew Pogrebennyk andrew.pogrebennyk@portaone.com wrote:
On 24.11.2010 22:02, Uriel Rozenbaum wrote:
:) I know is not the answer I expected, but I'll do something like that, maybe use sipp or sipsak.
Uriel, sipp or sipsak will do just fine, I've also used SIPp for this particular purpose: http://sipper.agnity.com/ - useful for more complex scenarios too (and I have no relation to the authors whatsoever:)).
-- Sincerely, Andrew Pogrebennyk
You can try todays release of QjSimple 0.6.5: http://www.ipcom.at/telefonie/qjsimple/
It allows you to specify 2 arbitrary headers to be added to the INVITE.
regards Klaus
Am 23.11.2010 19:58, schrieb Uriel Rozenbaum:
Hey Guys,
I was wondering if anyone knows some Windows Based softphone to do some tests on my Kamailio 1.5.4 deployment that will allow insertion of custom headers or at least Remote-Party-ID and/or P-Asserted-Identity.
Thanks in advance, Uriel
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Andrew Pogrebennyk -
Iñaki Baz Castillo -
Klaus Darilion -
Uriel Rozenbaum