5 Mar
2014
5 Mar
'14
11:30 p.m.
I have Kamailio setup as a proxy in front of a backend server (Asterisk).
When I make a call through the proxy, the Contact header in the 200 OK
that is returned to the client has the IP of the backend server in it.
Thus, the client is sending it's ACK directly to the backend server.
Is there a special method to rewrite the Contact header to be Kamailio's IP?
Where is a good place in the config to do this? (my config is loosely
based on this:
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb)
Thanks!
Marc
5 Mar
5 Mar
11:34 p.m.
On 05 Mar 2014, at 18:30, Marc Soda <msoda(a)coredial.com> wrote:
I have Kamailio setup as a proxy in front of a backend
server (Asterisk). When I make a call through the proxy, the Contact header in the 200 OK
that is returned to the client has the IP of the backend server in it. Thus, the client
is sending it's ACK directly to the backend server.
Is there a special method to rewrite the Contact header to be Kamailio's IP?
Check record_route() in the default configuration script. You need to add a route
set by using record_route() in the initial transaction.
Cheers,
/O
Where is a good place in the config to do this? (my config is loosely based on this:
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb)
Thanks!
Marc
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
11:53 p.m.
Thanks Olle. I am calling record_record() on the initial INVITE. In fact,
the OK has a Record-Route header:
1.1.1.1 is the endpoint
2.2.2.2 is the kamailio proxy
3.3.3.3 is the backend server
SIP/2.0 200 OK
Via: SIP/2.0/UDP 1.1.1.1:60077
;rport=46110;branch=z9hG4bK-d8754z-eb9768c7e3a2d1e7-1---d8754z-
Record-Route: <sip:2.2.2.2;lr=on;ftag=db634167;nat=yes>
From: <sip:sip7878_spqa@edge.domain.com;transport=UDP>;tag=db634167
To: <sip:2155555555@edge.coredial.com;transport=UDP>;tag=as3f9cf263
Call-ID: MzI5YTA3YmRkNzFiZjhhZTRkNTc2OGE1ZTc5ZjdjMmM.
CSeq: 2 INVITE
User-Agent: CoreDialPBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO
Supported: replaces
Contact: <sip:21555555555@3.3.3.3>
Content-Type: application/sdp
Content-Length: 266
v=0
o=root 13486 13487 IN IP4 3.3.3.3
s=session
c=IN IP4 3.3.3.3
t=0 0
m=audio 29990 RTP/AVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
I don't think 3.3.3.3 should show up anywhere, it should be rewritten to
2.2.2.2.
On Wed, Mar 5, 2014 at 1:34 PM, Olle E. Johansson <oej(a)edvina.net> wrote:
On 05 Mar 2014, at 18:30, Marc Soda <msoda(a)coredial.com> wrote:
I have Kamailio setup as a proxy in front of a backend server (Asterisk).
When I make a call through the proxy, the Contact header in the 200 OK
that is returned to the client has the IP of the backend server in it.
Thus, the client is sending it's ACK directly to the backend server.
Is there a special method to rewrite the Contact header to be Kamailio's
IP?
Check record_route() in the default configuration script. You need to add
a route set by using record_route() in the initial transaction.
Cheers,
/O
Where is a good place in the config to do this? (my config is loosely
based on this:
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb
)
Thanks!
Marc
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
11:57 p.m.
Why is erroneous to have the contact header with the backend IP?
With the record-route on the 200 Ok, the ACK should be directed to the
backend IP, but containing a route header pointing to the Kamailio IP.
Kamailio will loose_route() this request and send it to the backend server
as expected.
Regards,
On Wed, Mar 5, 2014 at 3:53 PM, Marc Soda <msoda(a)coredial.com> wrote:
Thanks Olle. I am calling record_record() on the
initial INVITE. In
fact, the OK has a Record-Route header:
1.1.1.1 is the endpoint
2.2.2.2 is the kamailio proxy
3.3.3.3 is the backend server
SIP/2.0 200 OK
Via: SIP/2.0/UDP 1.1.1.1:60077
;rport=46110;branch=z9hG4bK-d8754z-eb9768c7e3a2d1e7-1---d8754z-
Record-Route: <sip:2.2.2.2;lr=on;ftag=db634167;nat=yes>
From: <sip:sip7878_spqa@edge.domain.com;transport=UDP>;tag=db634167
To: <sip:2155555555@edge.coredial.com;transport=UDP>;tag=as3f9cf263
Call-ID: MzI5YTA3YmRkNzFiZjhhZTRkNTc2OGE1ZTc5ZjdjMmM.
CSeq: 2 INVITE
User-Agent: CoreDialPBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO
Supported: replaces
Contact: <sip:21555555555@3.3.3.3>
Content-Type: application/sdp
Content-Length: 266
v=0
o=root 13486 13487 IN IP4 3.3.3.3
s=session
c=IN IP4 3.3.3.3
t=0 0
m=audio 29990 RTP/AVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
I don't think 3.3.3.3 should show up anywhere, it should be rewritten to
2.2.2.2.
On Wed, Mar 5, 2014 at 1:34 PM, Olle E. Johansson <oej(a)edvina.net> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+595981146623
On 05 Mar 2014, at 18:30, Marc Soda <msoda(a)coredial.com> wrote:
I have Kamailio setup as a proxy in front of a backend server (Asterisk).
When I make a call through the proxy, the Contact header in the 200 OK
that is returned to the client has the IP of the backend server in it.
Thus, the client is sending it's ACK directly to the backend server.
Is there a special method to rewrite the Contact header to be Kamailio's
IP?
Check record_route() in the default configuration script. You need to add
a route set by using record_route() in the initial transaction.
Cheers,
/O
Where is a good place in the config to do this? (my config is loosely
based on this:
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb
)
Thanks!
Marc
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
6 Mar
6 Mar
12:24 a.m.
Yeah, I think I'm dealing with a buggy client...
Thanks all.
On Wed, Mar 5, 2014 at 1:57 PM, Carlos Ruiz Díaz
<carlos.ruizdiaz(a)gmail.com>wrote;wrote:
Why is erroneous to have the contact header with the
backend IP?
With the record-route on the 200 Ok, the ACK should be directed to the
backend IP, but containing a route header pointing to the Kamailio IP.
Kamailio will loose_route() this request and send it to the backend server
as expected.
Regards,
On Wed, Mar 5, 2014 at 3:53 PM, Marc Soda <msoda(a)coredial.com> wrote:
--
Marc Soda, Sr. Systems Engineer
*CoreDial, LLC* | www.coredial.com
1787 Sentry Parkway West, Building 16, Suite 100, Blue Bell, PA 19422
Office: (215) 297-4400 x203 | Fax: (215) 297-4401 | Email:
msoda(a)coredial.com
- - - - -
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.
Thanks Olle. I am calling record_record() on the
initial INVITE. In
fact, the OK has a Record-Route header:
1.1.1.1 is the endpoint
2.2.2.2 is the kamailio proxy
3.3.3.3 is the backend server
SIP/2.0 200 OK
Via: SIP/2.0/UDP 1.1.1.1:60077
;rport=46110;branch=z9hG4bK-d8754z-eb9768c7e3a2d1e7-1---d8754z-
Record-Route: <sip:2.2.2.2;lr=on;ftag=db634167;nat=yes>
From: <sip:sip7878_spqa@edge.domain.com;transport=UDP>;tag=db634167
To: <sip:2155555555@edge.coredial.com;transport=UDP>;tag=as3f9cf263
Call-ID: MzI5YTA3YmRkNzFiZjhhZTRkNTc2OGE1ZTc5ZjdjMmM.
CSeq: 2 INVITE
User-Agent: CoreDialPBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO
Supported: replaces
Contact: <sip:21555555555@3.3.3.3>
Content-Type: application/sdp
Content-Length: 266
v=0
o=root 13486 13487 IN IP4 3.3.3.3
s=session
c=IN IP4 3.3.3.3
t=0 0
m=audio 29990 RTP/AVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
I don't think 3.3.3.3 should show up anywhere, it should be rewritten to
2.2.2.2.
On Wed, Mar 5, 2014 at 1:34 PM, Olle E. Johansson <oej(a)edvina.net> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+595981146623
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
On 05 Mar 2014, at 18:30, Marc Soda <msoda(a)coredial.com> wrote:
I have Kamailio setup as a proxy in front of a backend server
(Asterisk). When I make a call through the proxy, the Contact header in
the 200 OK that is returned to the client has the IP of the backend server
in it. Thus, the client is sending it's ACK directly to the backend server.
Is there a special method to rewrite the Contact header to be Kamailio's
IP?
Check record_route() in the default configuration script. You need to
add a route set by using record_route() in the initial transaction.
Cheers,
/O
Where is a good place in the config to do this? (my config is loosely
based on this:
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb
)
Thanks!
Marc
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
12:33 a.m.
No, you are not dealing with a buggy client.
As Carlos pointed out, you are dealing with standard SIP loose routing
mechanism.
Time to read the RFC :)
Regards,
Ovidiu Sas
On Wed, Mar 5, 2014 at 2:24 PM, Marc Soda <msoda(a)coredial.com> wrote:
Yeah, I think I'm dealing with a buggy client...
Thanks all.
On Wed, Mar 5, 2014 at 1:57 PM, Carlos Ruiz Díaz <carlos.ruizdiaz(a)gmail.com>
wrote:
--
VoIP Embedded, Inc.
http://www.voipembedded.com
Why is erroneous to have the contact header with the backend IP?
With the record-route on the 200 Ok, the ACK should be directed to the
backend IP, but containing a route header pointing to the Kamailio IP.
Kamailio will loose_route() this request and send it to the backend server
as expected.
Regards,
On Wed, Mar 5, 2014 at 3:53 PM, Marc Soda <msoda(a)coredial.com> wrote:
--
Marc Soda, Sr. Systems Engineer
CoreDial, LLC | www.coredial.com
1787 Sentry Parkway West, Building 16, Suite 100, Blue Bell, PA 19422
Office: (215) 297-4400 x203 | Fax: (215) 297-4401 | Email:
msoda(a)coredial.com
- - - - -
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Thanks Olle. I am calling record_record() on the initial INVITE. In
fact, the OK has a Record-Route header:
1.1.1.1 is the endpoint
2.2.2.2 is the kamailio proxy
3.3.3.3 is the backend server
SIP/2.0 200 OK
Via: SIP/2.0/UDP
1.1.1.1:60077;rport=46110;branch=z9hG4bK-d8754z-eb9768c7e3a2d1e7-1---d8754z-
Record-Route: <sip:2.2.2.2;lr=on;ftag=db634167;nat=yes>
From: <sip:sip7878_spqa@edge.domain.com;transport=UDP>;tag=db634167
To: <sip:2155555555@edge.coredial.com;transport=UDP>;tag=as3f9cf263
Call-ID: MzI5YTA3YmRkNzFiZjhhZTRkNTc2OGE1ZTc5ZjdjMmM.
CSeq: 2 INVITE
User-Agent: CoreDialPBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO
Supported: replaces
Contact: <sip:21555555555@3.3.3.3>
Content-Type: application/sdp
Content-Length: 266
v=0
o=root 13486 13487 IN IP4 3.3.3.3
s=session
c=IN IP4 3.3.3.3
t=0 0
m=audio 29990 RTP/AVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
I don't think 3.3.3.3 should show up anywhere, it should be rewritten to
2.2.2.2.
On Wed, Mar 5, 2014 at 1:34 PM, Olle E. Johansson <oej(a)edvina.net> wrote:
--
Carlos
http://caruizdiaz.com
http://ngvoice.com
+595981146623
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
On 05 Mar 2014, at 18:30, Marc Soda <msoda(a)coredial.com> wrote:
I have Kamailio setup as a proxy in front of a backend server
(Asterisk). When I make a call through the proxy, the Contact header in the
200 OK that is returned to the client has the IP of the backend server in
it. Thus, the client is sending it's ACK directly to the backend server.
Is there a special method to rewrite the Contact header to be Kamailio's
IP?
Check record_route() in the default configuration script. You need to
add a route set by using record_route() in the initial transaction.
Cheers,
/O
Where is a good place in the config to do this? (my config is loosely
based on this:
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb)
Thanks!
Marc
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
3724
days inactive
3724
days old
5 comments
4 participants
participants (4)
-
Carlos Ruiz Díaz -
Marc Soda -
Olle E. Johansson -
Ovidiu Sas