I need to set a fixed prefix of, 666#, to enable me to break out to the PSTN that I am sending my traffic. Will you please help me with the needed commands and where to place it? Please find below the ser.cfg file:

________________________________

# # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

# new insterted statement listen=66.8.91.200 listen=127.0.0.1

# hostname matching an allias will satify the condition uri-myself alias=gaco.co.za alias=66.8.91.200

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R)

# this was commented port=5060 children=4

fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params --

# database location - NEW #modparam("auth_db, "db_uri, "sql://ser:>heslo>@localhost/ser")

# Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };

# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("gaco.co.za", "subscriber")) { www_challenge("gaco.co.za", "0"); break; };

save("location"); break; };

# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error();

};

# attemt handoff to PSTN if (uri=~"^sip:9[0-9] *@gaco.co.za") { log ("Forwarding to PSTN\n"); t_relay_to_udp("217.15.11.87","5060"); t_relay_to_tcp("217.15.11.87","5060"); break; };

}

________________________________ DISCLAIMER: The information in this message is confidential and is legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized.If receiving in error please accept our apologies and notify the sender immediately. You must also delete the original message from your machine. If you are not the intended recipient, any use, disclosure, copying, distribution or action taken in reliance of it, is prohibited and maybe unlawful.