Hi Daniel, Thanks a lot for your response. We will try the embedded module soon. In the meanwhile, we found the issue which was related a mistake in the toPath header parameter. Cheers, Alex From: Daniel-Constantin Mierla [mailto:miconda@gmail.com] Sent: Freitag, 25. Mai 2012 00:20 To: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - Users Mailing List Cc: Reichert Alexander; COURTAULT Francois Subject: Re: [SR-Users] Sending MSRP message to kamailio/msrprelay causes 501 error Hello, kamailio has an embedded msrp relay functionality. You have to load and configure msrp module -- it is new in upcoming release (3.3.0, planned to be out about mid of June): http://kamailio.org/docs/modules/devel/modules/msrp.html Have you tried with it as well? I developed the current version, but had no good clients I could test with at that time, so I used mainly network sending tools to simulate msrp traffic. Cheers, Daniel On 5/24/12 1:27 PM, Reichert Alexander wrote: Hi, We are developing a Java based SIP gateway implementation and are performing some integration tests on a kamailio/msrprelay server (plugin from www.msrprelay.org<http://www.msrprelay.org>)g>). The SIP signaling part works so far, but when sending a MSRP message, the client receives a 501 "Unknown method" error. However, it seems the request does not reach the MSRP module on the server as there is no corresponding trace log on the server side. On Protocol level, everything looks fine so far, the sequence executed is as follows: -->SIP REGISTER <-- SIP/2.0 401 Unauthorized -->SIP REGISTER <--SIP/2.0 200 OK -->INVITE <--SIP/2.0 407 Proxy Authentication Required -->ACK -->INVITE <--SIP/2.0 180 Ringing <--SIP/2.0 180 Ringing <--SIP/2.0 200 OK -->ACK The INVITE is processed with the following SDP packet in the request: v=0 o=- 1337788359935 1337788359935 IN IP4 localhost s=MSRP Session c=IN IP4 localhost t=0 0 m=message 2855 TCP/MSRP * a=path:msrp://localhost:2855/U3FuvW00m62UY0020H71;tcp a=accept-types:message/cpim text/* application/im-iscomposing+xml a=accept-wrapped-types:* a=setup:active And response: v=0 o=- 3546777215 3546777216 IN IP4 46.105.78.68 s=sipsimple 0.20.0 c=IN IP4 46.105.78.68 t=0 0 m=message 57233 TCP/MSRP * a=path:msrp://msrphost:2855/5AUNTOt7XlFsK7VuT4SzETEzMzc3ODg0MTUuMDcyOjQ2LjEwNS43OC42OA==;tcp msrp://msrphost:57233/6bf6dd73b9e4587b65b6;tcp a=accept-types:message/cpim text/* application/im-iscomposing+xml a=accept-wrapped-types:* a=setup:passive But when sending the MSRP message, 501 is returned: MSRP f0CHA1TD SEND To-Path: msrp://msrphost:57233/6bf6dd73b9e4587b65b6;tcp From-Path: msrp://localhost:52673/b10XadK9;tcp Message-ID: 13377883623135c260a3568cc Byte-Range: 1-*/14 Hello Francois -------f0CHA1TD$ MSRP f0CHA1TD 501 Unknown method: SEND To-Path: msrp://localhost:52673/b10XadK9;tcp From-Path: msrp://msrphost:57233/6bf6dd73b9e4587b65b6;tcp -------f0CHA1TD$ When testing with two sip-simple client endpoints, MSRP messaging works fine, but on protocol traces we cannot identify any differences between sip-simple communication flows and the ones we are implementing. Does anyone have a hint on what is wrong in this message flow? Any advice is appreciated. Thanks, Alex _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda