Hello, I am trying to configure rtpproxy with Kamailio. kamailio.cfg is already configured (default) for rtpproxy. I just add the following line at the top of the cfg file.
*#!define WITH_NAT*
After that rtpproxy is working in local network. Both client and sip server are running in local network. But when I run this in public network, rtpproxy didn't trigger.
Rtppoxy and Kamailio are running in same public IP, Sip client also running in another *public IP. *So there is *no NAT* *.*
Both local and public version was Centos 6 Kamailio version : 4.4 rtpproxy version: 2.1
Note: udp connection between rtpproxy and Kamailio was established (both in public and private network)
Thanks shantanu saha
Hi Shantanu,
You need to modify kamailio config to achive your goal. Look into NAT routing (i.e. NATDETECT and NATMANAGE).
2016-12-03 8:23 GMT+02:00 shantanu saha shantanu.csedu@gmail.com:
Hello, I am trying to configure rtpproxy with Kamailio. kamailio.cfg is already configured (default) for rtpproxy. I just add the following line at the top of the cfg file.
*#!define WITH_NAT*
After that rtpproxy is working in local network. Both client and sip server are running in local network. But when I run this in public network, rtpproxy didn't trigger.
Rtppoxy and Kamailio are running in same public IP, Sip client also running in another *public IP. *So there is *no NAT* *.*
Both local and public version was Centos 6 Kamailio version : 4.4 rtpproxy version: 2.1
Note: udp connection between rtpproxy and Kamailio was established (both in public and private network)
Thanks shantanu saha
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
shantanu saha -
Vladyslav Zakhozhai