Hi all!
I have a problem with Openser an RTPProxy. I am using nathelper module to establish a statefull connection with RTPProxy in between the both clients. I player around with it now for a while but I cant get it to work. All the examples in the internet a for clients behind NAT, etc... Maybe one of you might help me.
I am using Openser 1.3.0 with RTPProxy 20040107 on Debian Linux "Etch".
My scenario looks like this:
UA(public ip) ----- Firewall (public IP; 192.168.0.1/24) ---- Openser+RTPProxy (192.168.0.5/24) ----- UA (192.168.0.23/24)
The Firewall forward Port 5060 to the Openser which is listening on 5060 as well. Also Ports from 60000-61000 are forwarded to the Openser aswell. (RTPProxy was compile with these Ports)
I have no access to the firewall and it does not manipulate SIP Messages.
Is there a chance to get this to work?
If so, I willl post my configuration file to see what I did wrong.
Thanks a lot.
Greetz Martin
Hi morton,
You posted a scenario with RtpProxy in a private IP...
Is RtpProxy in a private IP? It must be in a public IP, because the both clients should be able see the RtpProxy...
I hope I have helped....
"morton.olson" martin.leichter@esk.fraunhofer.de escreveu: Hi all!
I have a problem with Openser an RTPProxy. I am using nathelper module to establish a statefull connection with RTPProxy in between the both clients. I player around with it now for a while but I cant get it to work. All the examples in the internet a for clients behind NAT, etc... Maybe one of you might help me.
I am using Openser 1.3.0 with RTPProxy 20040107 on Debian Linux "Etch".
My scenario looks like this:
UA(public ip) ----- Firewall (public IP; 192.168.0.1/24) ---- Openser+RTPProxy (192.168.0.5/24) ----- UA (192.168.0.23/24)
The Firewall forward Port 5060 to the Openser which is listening on 5060 as well. Also Ports from 60000-61000 are forwarded to the Openser aswell. (RTPProxy was compile with these Ports)
I have no access to the firewall and it does not manipulate SIP Messages.
Is there a chance to get this to work?
If so, I willl post my configuration file to see what I did wrong.
Thanks a lot.
Greetz Martin
-
Daniel Cardoso Alves -
morton.olson