Thanks Henning, I think it was my error because problem disapeer when I comment these lines in my config: # modparam("uri_db", "db_table", "uri") # modparam("uri_db", "use_uri_table", 0) so now kamailio use 'subscriber' table by default, btw I'm not sure but the parameter 'db_table' should not be activated since parameter 'use_uri_table' was '0'... Now I am testing kamailio 1.4 to use a VIEW from mya2billing DB as a subscriber database, It works in 1.3.2 version of openser using this modparam: modparam("uri_db", "subscriber_table", "subscriber_v2") , where 'subscriber_v2' its the VIEW shown below: CREATE VIEW openser.subscriber_v2 AS SELECT id AS id, useralias AS username, '192.168.12.212' AS domain, userpass AS password, firstname AS first_name, lastname AS last_name, email AS email_address, '2008-07-24 12:48:03' AS datetime_created, md5(concat(useralias,' : ','192.168.12.212',' : ',userpass)) AS ha1, md5(concat(useralias,&#39;(a)&#39;,&#39;192.168.12.212&#39;,&#39; : ','192.168.12.212',' : ',userpass)) AS ha1b, '' AS timezone, useralias AS rpid from mya2billing.cc_card WHERE tariff=2; Also Its necesary to insert a new value in 'version' table: INSERT INTO version (table_name,table_version) VALUES ('subscriber_V2','6') Then you can authenticate users using if(!www_authorize("", "subscriber_v2")) or if(!proxy_authorize("", "subscriber_v2")) in register and invite request routes.... In Kamailio version 1.4 the modparam "subscriber_table" was removed from uri_db module, Is it enough to specify the new table in www_authorize and proxy_authorize functions? thanks rafael On Mon, Aug 11, 2008 at 4:19 PM, Henning Westerholt < henning.westerholt(a)1und1.de&gt; wrote:

Hi Henning Thanks for your answers, you are right and I was confusing the module names, my brain it will break at any time :-)... I am using check_to(), check_from() and does_uri_exist() functions from uri_db module so I have to define those parameters to specify the other subscriber table (mysql view 'subscriber_v2'): modparam("uri_db", "db_table", "subscriber_v2") modparam("uri_db", "use_uri_table", 0) ;;; specify '1' just if the "uri" table should be used. now it works, I will put kamailio 1.4 in production after doing and pass some tests, thank you very much. rafael On Tue, Aug 12, 2008 at 4:03 PM, Henning Westerholt < henning.westerholt(a)1und1.de&gt; wrote: