Hello, command [ modparam("auth_db", "domain_column", "domain") ] is used to indicate to auth_db module the name of the column to use to retrieve the domain associated to an user in the "subcriber" table (table name use generally by default in auth_db). This table is filled by the administrator to grant access The "location" is filled by openSER when user registered on openSER based of info given by UA. So it's possible to have location.domain != subscriber.domain if the settings of the UA is not performed correctly. Field location.received contains this data SIP:IP:PORT of the UA device Hope this helps, Christophe -----Message d'origine----- De : users-bounces(a)openser.org [mailto:users-bounces@openser.org] De la part de buxalex(a)libero.it Envoyé : jeudi 6 avril 2006 16:38 À : users Objet : [Users] aut_db module and realm Hello to everybody, I configured the openser.cfg as follow: #----------------------------------- # AUT_DB parameters #---------------------------------- modparam("auth_db", "db_url", "mysql://openser:openser@localhost/openser") modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "domain_column", "domain") modparam("auth_db", "user_column", "phone") modparam("auth_db", "password_column", "password") In this way openser checks for authentication the phone number instead of the username (it works fine!!). My problem is realted to domain. Entering the modparam(.....,"domain") I was expecting to see the domain column populated in the table location, but it doesn't happen. Do I have to configure something else? Moreover, anybody could explain me the meaning of the column location.received? thanks in advance Alessandro _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users