20 Jul
2003
20 Jul
'03
10:23 p.m.
We have used our own very prototypical one, bonephone. -jiri
At 06:18 AM 7/19/2003, Ng, Soo Sim wrote:
May I know which IPv6 UA Client do you use?
SSng
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/
1 Aug
1 Aug
5:21 a.m.
New subject: [Serusers] ser support IPv6 ?
Hi,
I have installed ser-0.8.11pre29-1.i386.rpm on Linux PC.
I added IPv6 global address to the interface on Linux PC.
Now, I just only started ser.
I cannot see IPv6 address and port with netstat command.(see bellow)
~~~~~~~~~~~~~~~~~~~~
[root@ssfch29 root]# netstat -an
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
: :
tcp 0 0 :::23 :::* LISTEN
udp 0 0 192.168.1.10:5060 0.0.0.0:*
udp 0 0 10.41.133.39:5060 0.0.0.0:*
udp 0 0 127.0.0.1:5060 0.0.0.0:*
udp 0 0 0.0.0.0:111 0.0.0.0:*
Active UNIX domain sockets (servers and established)
~~~~~~~~~~~~~~~~~~~~
Is any configration necessary to let ser work with IPv6 mode?
regards,
Maekawa.
We have used our own very prototypical one, bonephone.
-jiri
At 06:18 AM 7/19/2003, Ng, Soo Sim wrote:
>May I know which IPv6 UA Client do you use?
>SSng
12:30 p.m.
New subject: [Serusers] ser support IPv6 ?
On Aug 01, 2003 at 12:21, Yoshiharu Maekawa <maekawa(a)cd.jp.nec.com> wrote:
Hi,
I have installed ser-0.8.11pre29-1.i386.rpm on Linux PC.
I added IPv6 global address to the interface on Linux PC.
Now, I just only started ser.
I cannot see IPv6 address and port with netstat command.(see bellow)
By default ser does not listen on any ipv6 address. You have to
explicitely specify the ipv6 addresses on which it will listen (either
add -l ipv6_address to the command line or listen= ipv6_address1
ipv6_address2 to the ser.cfg).
BTW: try the latest stable cvs version (ser 0.8.11 rc2), it contains
some ipv6 fixes.
Andrei
4 Aug
4 Aug
1:46 p.m.
New subject: [Serusers] ser support IPv6 ?
Hi,
On Aug 01, 2003 at 12:21, Yoshiharu Maekawa
<maekawa(a)cd.jp.nec.com> wrote:
I started "ser-0.8.1.pre29-1" with ipv6 command line (-l ipv6_address ).
and send register message from ipv6 sip client.
I received a following SIP error message from ser.
I have two questions.
(1)As for this error, is it fixed a bug already?
(2)I want to create Red hat RPM of ser from cvs source code .
Hi,
I have installed ser-0.8.11pre29-1.i386.rpm on Linux PC.
I added IPv6 global address to the interface on Linux PC.
Now, I just only started ser.
I cannot see IPv6 address and port with netstat command.(see bellow)
By default ser does not listen on any ipv6 address. You have to
explicitely specify the ipv6 addresses on which it will listen (either
add -l ipv6_address to the command line or listen= ipv6_address1
ipv6_address2 to the ser.cfg). BTW: try the latest stable cvs version (ser 0.8.11
rc2), it contains
some ipv6 fixes.
Andrei
Regards,
maekawa
==================================== ipv6 sip client => ser
Internet Protocol Version 6
Version: 6
Traffic class: 0x00
Flowlabel: 0x00000
Payload length: 552
Next header: UDP (0x11)
Hop limit: 128
Source address: 2001:3e8:1240:1::1
Destination address: 2001:3e8:1240:1::8
User Datagram Protocol, Src Port: 1030 (1030), Dst Port: 5060 (5060)
Source port: 1030 (1030)
Destination port: 5060 (5060)
Length: 552
Checksum: 0xc67d (correct)
Session Initiation Protocol
Request line: REGISTER sip:ssfch29.ssf.abk.nec.co.jp SIP/2.0
Method: REGISTER
Message Header
Via: SIP/2.0/UDP [2001:3e8:1240:1::1]:13774
From:
<sip:ymaekawa@ssfch29.ssf.abk.nec.co.jp>;tag=ad9691c0-8042-49bf-ba58-78d9183657b1
To: <sip:ymaekawa@ssfch29.ssf.abk.nec.co.jp>
Call-ID: 9a112d58-06f7-4fbf-b460-665d85c84811(a)10.41.133.231
CSeq: 1 REGISTER
Contact: <sip:[2001:3e8:1240:1::1]:13774>;methods="INVITE, MESSAGE,
INFO, SUBSCRIBE, OPTIONS, BYE, CANCEL, NOTIFY, ACK";q=0.5
User-Agent: Windows RTC/1.0
Expires: 1200
Event: registration
Allow-Events: presence
Content-Length: 0
==================================== ipv6 sip client <= ser
Internet Protocol Version 6
Version: 6
Traffic class: 0x00
Flowlabel: 0x00000
Payload length: 692
Next header: UDP (0x11)
Hop limit: 64
Source address: 2001:3e8:1240:1::8
Destination address: 2001:3e8:1240:1::1
User Datagram Protocol, Src Port: 5060 (5060), Dst Port: 13774 (13774)
Source port: 5060 (5060)
Destination port: 13774 (13774)
Length: 692
Checksum: 0x6a61 (correct)
Session Initiation Protocol
Status line: SIP/2.0 500 I'm terribly sorry, server error occured (7/TM)
Status-Code: 500
Message Header
Via: SIP/2.0/UDP [2001:3e8:1240:1::1]:13774;received=[2001:3E8:1240:1:0:0:0:1]
From:
<sip:ymaekawa@ssfch29.ssf.abk.nec.co.jp>;tag=ad9691c0-8042-49bf-ba58-78d9183657b1
To:
<sip:ymaekawa@ssfch29.ssf.abk.nec.co.jp>;tag=e1201a00721ecf0105c9d54759cb26c7-b3fd
Call-ID: 9a112d58-06f7-4fbf-b460-665d85c84811(a)10.41.133.231
CSeq: 1 REGISTER
Server: Sip EXpress router (0.8.11pre29 (i386/linux))
Content-Length: 0
Warning: 392 2001:3e8:1240:1::8:5060 "Noisy feedback tells: pid=5185
req_src_ip=2001:3E8:1240:1:0:0:0:1 req_src_port=1030 in_uri=sip:ssfch29.ssf.abk.nec.co.jp
out_uri=sip:ssfch29.ssf.abk.nec.co.jp via_cnt==1"
1:56 p.m.
New subject: [Serusers] ser support IPv6 ?
On Aug 04, 2003 at 20:46, Yoshiharu Maekawa <maekawa(a)cd.jp.nec.com> wrote:
Hi,
I don't know if this bug is fixed, but 2 others are (e.g. using ipv6
references in received).
Please try again with the latest stable (0.8.11rc3) or unstable cvs.
Also please start ser with maximum debug (debug=9) and if you get an
error send us also the ser log (it's better to start ser with
log_stderror=1 and redirect sdterror to a file: ser -f ser.cfg
2>/tmp/log).
We don't have an ipv6 UA so we generally tested only forwarding
between ipv4<->ipv6.
Andrei
On Aug 01, 2003 at 12:21, Yoshiharu Maekawa
<maekawa(a)cd.jp.nec.com> wrote:
I started "ser-0.8.1.pre29-1" with ipv6 command line (-l ipv6_address ).
and send register message from ipv6 sip client.
I received a following SIP error message from ser.
I have two questions.
(1)As for this error, is it fixed a bug already? Hi,
I have installed ser-0.8.11pre29-1.i386.rpm on Linux PC.
I added IPv6 global address to the interface on Linux PC.
Now, I just only started ser.
I cannot see IPv6 address and port with netstat command.(see bellow)
By default ser does not listen on any ipv6 address. You have to
explicitely specify the ipv6 addresses on which it will listen (either
add -l ipv6_address to the command line or listen= ipv6_address1
ipv6_address2 to the ser.cfg).
25 Aug
25 Aug
1:21 p.m.
New subject: [Serusers] ser support IPv6 ?
Hello,
is the ipv6 problem you reported on previously still around?
-jiri
At 01:46 PM 8/4/2003, Yoshiharu Maekawa (=?iso-2022-jp?B?GyRCQTBAbjJCPVUbKEI=?=) wrote:
Hi,
--
Jiri Kuthan http://iptel.org/~jiri/
On Aug 01, 2003 at 12:21, Yoshiharu Maekawa
<maekawa(a)cd.jp.nec.com> wrote:
I started "ser-0.8.1.pre29-1" with ipv6 command line (-l ipv6_address ).
and send register message from ipv6 sip client.
I received a following SIP error message from ser.
I have two questions.
(1)As for this error, is it fixed a bug already?
(2)I want to create Red hat RPM of ser from cvs source code .
Hi,
I have installed ser-0.8.11pre29-1.i386.rpm on Linux PC.
I added IPv6 global address to the interface on Linux PC.
Now, I just only started ser.
I cannot see IPv6 address and port with netstat command.(see bellow)
By default ser does not listen on any ipv6 address. You have to
explicitely specify the ipv6 addresses on which it will listen (either
add -l ipv6_address to the command line or listen= ipv6_address1
ipv6_address2 to the ser.cfg). BTW: try the latest stable cvs version (ser
0.8.11 rc2), it contains
some ipv6 fixes.
Andrei
Regards,
maekawa
==================================== ipv6 sip client => ser
Internet Protocol Version 6
Version: 6
Traffic class: 0x00
Flowlabel: 0x00000
Payload length: 552
Next header: UDP (0x11)
Hop limit: 128
Source address: 2001:3e8:1240:1::1
Destination address: 2001:3e8:1240:1::8
User Datagram Protocol, Src Port: 1030 (1030), Dst Port: 5060 (5060)
Source port: 1030 (1030)
Destination port: 5060 (5060)
Length: 552
Checksum: 0xc67d (correct)
Session Initiation Protocol
Request line: REGISTER sip:ssfch29.ssf.abk.nec.co.jp SIP/2.0
Method: REGISTER
Message Header
Via: SIP/2.0/UDP [2001:3e8:1240:1::1]:13774
From:
<sip:ymaekawa@ssfch29.ssf.abk.nec.co.jp>;tag=ad9691c0-8042-49bf-ba58-78d9183657b1
To: <sip:ymaekawa@ssfch29.ssf.abk.nec.co.jp>
Call-ID: 9a112d58-06f7-4fbf-b460-665d85c84811(a)10.41.133.231
CSeq: 1 REGISTER
Contact: <sip:[2001:3e8:1240:1::1]:13774>;methods="INVITE, MESSAGE,
INFO, SUBSCRIBE, OPTIONS, BYE, CANCEL, NOTIFY, ACK";q=0.5
User-Agent: Windows RTC/1.0
Expires: 1200
Event: registration
Allow-Events: presence
Content-Length: 0
==================================== ipv6 sip client <= ser
Internet Protocol Version 6
Version: 6
Traffic class: 0x00
Flowlabel: 0x00000
Payload length: 692
Next header: UDP (0x11)
Hop limit: 64
Source address: 2001:3e8:1240:1::8
Destination address: 2001:3e8:1240:1::1
User Datagram Protocol, Src Port: 5060 (5060), Dst Port: 13774 (13774)
Source port: 5060 (5060)
Destination port: 13774 (13774)
Length: 692
Checksum: 0x6a61 (correct)
Session Initiation Protocol
Status line: SIP/2.0 500 I'm terribly sorry, server error occured (7/TM)
Status-Code: 500
Message Header
Via: SIP/2.0/UDP [2001:3e8:1240:1::1]:13774;received=[2001:3E8:1240:1:0:0:0:1]
From:
<sip:ymaekawa@ssfch29.ssf.abk.nec.co.jp>;tag=ad9691c0-8042-49bf-ba58-78d9183657b1
To:
<sip:ymaekawa@ssfch29.ssf.abk.nec.co.jp>;tag=e1201a00721ecf0105c9d54759cb26c7-b3fd
Call-ID: 9a112d58-06f7-4fbf-b460-665d85c84811(a)10.41.133.231
CSeq: 1 REGISTER
Server: Sip EXpress router (0.8.11pre29 (i386/linux))
Content-Length: 0
Warning: 392 2001:3e8:1240:1::8:5060 "Noisy feedback tells: pid=5185
req_src_ip=2001:3E8:1240:1:0:0:0:1 req_src_port=1030 in_uri=sip:ssfch29.ssf.abk.nec.co.jp
out_uri=sip:ssfch29.ssf.abk.nec.co.jp via_cnt==1"
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7562
days inactive
7598
days old
5 comments
3 participants
participants (3)
-
Andrei Pelinescu-Onciul -
Jiri Kuthan -
Yoshiharu Maekawa