Hi! I'm in some trouble with my SER and rtpproxy, the problem is simple (I think), during a call, I can see ACK debug messages and in ngrep, but afet 30 seconds after pink up phone, the call are hang-up. Take a look in this debug from ser.cfg: 0(8226) >=====> remember this is ATA 0(8226) INVITE The phone rings, ok! 0(8226) >=====> force_rtp_proxy 0(8226) >=====> yes, it is a request for our domain 0(8226) >=====> Forwarding to PSTN 0(8226) >=====> going to primus 0(8226) >=====> reply 1 0(8226) >=====> remember this is ATA Pick-up and can speak and listen! 0(8226) ACK 0(8226) >=====> yes, it is a request for our domain 0(8226) >=====> Forwarding to PSTN 0(8226) >=====> going to primus 0(8226) >=====> remember this is ATA 0(8226) INVITE 0(8226) >=====> force_rtp_proxy 0(8226) >=====> yes, it is a request for our domain 0(8226) >=====> Forwarding to PSTN 0(8226) >=====> going to primus 0(8226) >=====> remember this is ATA 0(8226) ACK 0(8226) >=====> yes, it is a request for our domain 0(8226) >=====> Forwarding to PSTN 0(8226) >=====> going to primus 0(8226) >=====> reply 1 0(8226) >=====> remember this is ATA 0(8226) ACK 0(8226) >=====> yes, it is a request for our domain 0(8226) >=====> Forwarding to PSTN 0(8226) >=====> going to primus 0(8226) >=====> reply 1 0(8226) >=====> reply force_rtp_proxy 0(8226) >=====> reply 1 0(8226) >=====> reply force_rtp_proxy 0(8226) >=====> remember this is ATA 0(8226) ACK 0(8226) >=====> reply 1 0(8226) >=====> reply force_rtp_proxy 0(8226) >=====> remember this is ATA 0(8226) ACK 0(8226) >=====> remember this is ATA 0(8226) ACK 0(8226) >=====> reply 1 0(8226) >=====> reply force_rtp_proxy 0(8226) >=====> remember this is ATA Can speak and listen. 0(8226) ACK 0(8226) >=====> reply 1 0(8226) >=====> reply force_rtp_proxy 0(8226) >=====> remember this is ATA 0(8226) ACK After this, the loop dont pass anymore on t_on_reply("1"); 0(8226) >=====> remember this is ATA 0(8226) ACK 0(8226) >=====> remember this is ATA 0(8226) ACK 0(8226) >=====> remember this is ATA 0(8226) ACK 0(8226) >=====> remember this is ATA 0(8226) ACK 0(8226) >=====> remember this is ATA 0(8226) BYE 0(8226) >=====> remember this is ATA 0(8226) ACK Regards. -- |o |o Learn the rules so you know how to break them properly. -- Dalai |o Lama |o |o Fabio Silvestri |o fabio(a)informatec.com.br |o ICQ: 1667351 |o