13 May
2003
13 May
'03
12:30 p.m.
Hello all !
I have problem with this feature
As was described, I:
- created separate subscriber and location database table for my second
domain called subscriber.gdynia and location.gdynia
- configure my script properly (I hope) ;)
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("gdynia.pl",
"subscriber.gdynia")) {
www_challenge("gdynia.pl", "0");
break;
};
save("location.gdynia");
log(3,"REGISTER from gdynia.pl");
sl_send_reply("200", "ok");
break;
if (!www_authorize("gda.pl", "subscriber"))
{
www_challenge("gda.pl", "0");
break;
};
save("location");
log(3,"REGISTER from gda.pl");
sl_send_reply("200", "ok");
break;
};
Nobody is regigisted from this domain :(
Is this same solution ( create separate table) in the newest version of
SER ?
Greetings
Andrzej Radke
13 May
13 May
12:31 p.m.
Hello, comments inline.
On 13-05 12:30, Andrzej Radke wrote:
Hello all !
I have problem with this feature
As was described, I:
- created separate subscriber and location database table for my second
domain called subscriber.gdynia and location.gdynia
- configure my script properly (I hope) ;)
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("gdynia.pl",
"subscriber.gdynia")) {
www_challenge("gdynia.pl", "0");
break;
};
save("location.gdynia");
log(3,"REGISTER from gdynia.pl");
sl_send_reply("200", "ok");
break;
if (!www_authorize("gda.pl", "subscriber"))
{
www_challenge("gda.pl", "0");
break;
};
save("location");
log(3,"REGISTER from gda.pl");
sl_send_reply("200", "ok");
break;
};
What is this supposed to do ? The second part of the script starting
with www_authorize("gda.pl", "subscriber") will never be executed
because there is break before it. What are you trying to achieve ?
Jan.
12:48 p.m.
On Tue, 13 May 2003, Jan Janak wrote:
Hello, comments inline.
On 13-05 12:30, Andrzej Radke wrote:
You right ! But if I remove this "break" command nothing is happend
Nobody from gda.pl and gdynia.pl is registered. :(
I'd like a support for 2 different domains. What can I do ?
I think the problem is in my config script, not in database tables, which
I created
Andrzej
Hello all !
I have problem with this feature
As was described, I:
- created separate subscriber and location database table for my second
domain called subscriber.gdynia and location.gdynia
- configure my script properly (I hope) ;)
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("gdynia.pl",
"subscriber.gdynia")) {
www_challenge("gdynia.pl", "0");
break;
};
save("location.gdynia");
log(3,"REGISTER from gdynia.pl");
sl_send_reply("200", "ok");
break;
if (!www_authorize("gda.pl", "subscriber"))
{
www_challenge("gda.pl", "0");
break;
};
save("location");
log(3,"REGISTER from gda.pl");
sl_send_reply("200", "ok");
break;
};
What is this supposed to do ? The second part of the script starting
with www_authorize("gda.pl", "subscriber") will never be executed
because there is break before it. What are you trying to achieve ?
Jan.
1 p.m.
On 13-05 12:48, Andrzej Radke wrote:
You right ! But if I remove this "break"
command nothing is happend
Nobody from gda.pl and gdynia.pl is registered. :(
I'd like a support for 2 different domains. What can I do ?
I think the problem is in my config script, not in database tables, which
I created
OK, to achieve this you will need a condition to differentiate the
domains. For example something like this:
if (uri=~".*gda\.pl") {
if (method=="REGISTER") {
if (!www_authorize("gda.pl", "subscriber")) {
www_challenge("gda.pl", "0");
break;
};
save("location");
break;
};
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
} else if (uri=~".*gdynia\.pl") {
if (method=="REGISTER") {
if (!www_authorize("gdynia.pl", "subscriber2")) {
www_challenge("gdynia.pl", "0");
break;
};
save("location2");
break;
};
if (!lookup("location2")) {
sl_send_reply("404", "Not Found");
break;
};
};
if (!t_relay()) {
sl_reply_error();
};
This is easy if you have a small number of domains that you want to
handle and you don't change it very often.
If you need multidomain support and the domains are created often or
automatically then it is also possible to do this without
modifications of the script and restarting the server. But only CVS
version of ser supports that.
Jan.
2:35 p.m.
OK, to achieve this you will need a condition to
differentiate the
domains. For example something like this:
------------cut--------------------
------------cut--------------------
This is easy if you have a small number of domains that you want to
handle and you don't change it very often.
If you need multidomain support and the domains are created often or
automatically then it is also possible to do this without
modifications of the script and restarting the server. But only CVS
version of ser supports that.
Jan.
Thanks Jan once more for you help :)
Andrzej
3:43 p.m.
On Tue, 13 May 2003, Andrzej Radke wrote:
One question yet.
What with aliases for separate domains ?
Have to I add something to my configuration ?
something like this: save("aliases") save("aliases1")
for separate domian registration ?
Andrzej
OK, to
achieve this you will need a condition to differentiate the
domains. For example something like this:
------------cut--------------------
------------cut--------------------
This is easy if you have a small number of domains that you want to
handle and you don't change it very often.
If you need multidomain support and the domains are created often or
automatically then it is also possible to do this without
modifications of the script and restarting the server. But only CVS
version of ser supports that.
Jan.
Thanks Jan once more for you help :)
7676
days inactive
7676
days old
5 comments
2 participants
participants (2)
-
Andrzej Radke -
Jan Janak