hi,
I have set the debug=9 in ser.cfg and build with mode=debug, but i still can not get much info from /var/log/messages.
Can anybody give a hint ?
Many thanks, hong
-------------------------- debug=9 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
#debug=7 #fork=no #log_stderror=yes
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
-------------------------------- Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is initially 6 5535 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is finally 131 070 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is initially 6 5535 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is finally 131 070 Dec 2 18:32:09 localhost ./ser[15806]: INFO: fifo process starting: 15806 Dec 2 18:32:09 localhost ./ser[15806]: SER: open_uac_fifo: fifo server up at /t mp/ser_fifo...
Hello, only the errors are reported to syslog -- what could be the reason to report more. If you want to see the debug messages, you can run ser with log_stderror=yes from a terminal and you will see a lot of messages there.
.Daniel
On 12/2/2003 11:40 AM, hong cheng wrote:
hi, I have set the debug=9 in ser.cfg and build with mode=debug, but i still can not get much info from /var/log/messages. Can anybody give a hint ? Many thanks, hong
debug=9 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) #debug=7 #fork=no #log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is initially 6 5535 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is finally 131 070 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is initially 6 5535 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is finally 131 070 Dec 2 18:32:09 localhost ./ser[15806]: INFO: fifo process starting: 15806 Dec 2 18:32:09 localhost ./ser[15806]: SER: open_uac_fifo: fifo server up at /t mp/ser_fifo...
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
In which log file the messages can be found depends a lot on the configuration of your syslog daemon. On debian for example you will see them at /var/log/ daemon.log. syslog may be another candidate for searching.
Nils
On Tuesday 02 December 2003 11:40, hong cheng wrote:
hi,
I have set the debug=9 in ser.cfg and build with mode=debug, but i still can not get much info from /var/log/messages.
Can anybody give a hint ?
Many thanks, hong
debug=9 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
#debug=7 #fork=no #log_stderror=yes
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is initially 6 5535 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is finally 131 070 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is initially 6 5535 Dec 2 18:32:09 localhost ./ser[15797]: INFO: udp_init: SO_RCVBUF is finally 131 070 Dec 2 18:32:09 localhost ./ser[15806]: INFO: fifo process starting: 15806 Dec 2 18:32:09 localhost ./ser[15806]: SER: open_uac_fifo: fifo server up at /t mp/ser_fifo...
-
Daniel-Constantin Mierla -
hong cheng -
Nils Ohlmeier