i had :
UA1 (192.168.4.66:5061)
}------------->Asterisk----------->SER-----------> UA3 (192.168.4.65:5061) UA2 (192.168.4.66:5062)
then UA1 moved to SER domain :
UA3 (192.168.4.65:5061) UA2 (192.168.4.66:5062) ------------->Asterisk----------->SER----------->
UA1 (192.168.4.66:5061)
UA1 registers to SER and SER forwards the registration to ASTERISK, Asterisk is aware of the new location.
UA2 tries to call UA3. It sends the invite to Asterisk and Asterisk replies with a TRYING message. after a while the call fails with an error
2007/2/24, ram talk2ram@gmail.com:
then register with SER, should do the job
UA----ASterisk----SER-----Phone
is this correct
ram
On 2/24/07, karim basraoui basraouik@gmail.com wrote:
Hi,
the call i'm trying to establish is from ASTERISK to SER. the UA i'm calling was initially in ASTERISK domain and moved to SER domain , a roaming case.
2007/2/24, ram < talk2ram@gmail.com>:
Hi
your question is not clear
how is the call path happening from ASterisk or from SER or both are gateway proxies ?
ram
On 2/23/07, karim basraoui < basraouik@gmail.com > wrote:
Hi,
I've set up a small architecture in which an ASterisk proxy is connected to a SER proxy in two different domains.
I have sip phones connected to both of them. when an asterisk subscriber "travels" to SER domain it tries to register to SER. I've configured SER to accept foreign subscribers and to REGISTER them to their initial domain by the command "t_replicate". Till now everything works good, the UA is registered and Asterisk is aware of its new location, it displays in peers list the UA and its new IP address and port.
The problem is when i'm trying to call the foreign UA from an Asterisk subscriber, it doesn't work. i have a TRYING response but no call establishement.
how can i overcome this problem please?
-- BASRAOUI Karim www.basraouik.afrikart.net _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- BASRAOUI Karim www.basraouik.afrikart.net