30 Dec
2004
30 Dec
'04
10:49 p.m.
Hi list. I have this problem. There's something that's not working,
because, when ever I set up a call, I receive both messages INVITE and
BYE instantly. I think the correct way would it be to send Start
messages (Acct-Status-Type = Start) upon INVITEs and Stop messages
(Acct-Status-Type = Stop) upon BYEs. But this is not happening. Look ...
radrecv: Accounting Request from host c0a801fd code=4, id=205,
length=270
Acct-Status-Type = Start
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = Invite
User-Name = "1992001(a)192.168.1.253"
Calling-Station-Id = "sip:1992001@192.168.1.253:5060;user=phone"
Called-Station-Id = "sip:1992005@192.168.1.253:5060;user=phone"
Sip-Translated-Request-URI = "sip:1992005@192.168.1.178:11005"
Acct-Session-Id = "6dfb6640367b1ab7(a)192.168.1.113"
Sip-To-Tag = "54061171"
Sip-From-Tag = "39eeac148f846cb9"
Sip-CSeq = "1544"
NAS-IP-Address = 192.168.1.253
NAS-Port-Id = 5060
Acct-Delay-Time = 0
Sending Accounting Ack of id 205 to c0a801fd (nas linux)
radrecv: Accounting Request from host c0a801fd code=4, id=206,
length=270
Acct-Status-Type = Start
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = Bye
User-Name = "1992001(a)192.168.1.253"
Calling-Station-Id = "sip:1992001@192.168.1.253:5060;user=phone"
Called-Station-Id = "sip:1992005@192.168.1.253:5060;user=phone"
Sip-Translated-Request-URI = "sip:1992005@192.168.1.178:11005"
Acct-Session-Id = "6dfb6640367b1ab7(a)192.168.1.113"
Sip-To-Tag = "54061171"
Sip-From-Tag = "39eeac148f846cb9"
Sip-CSeq = "1544"
NAS-IP-Address = 192.168.1.253
NAS-Port-Id = 5060
Acct-Delay-Time = 0
Sending Accounting Ack of id 206 to c0a801fd (nas linux)
Do you see ? ...Both outputs show an Acct-Status-Type = Start, but first
output refers to an INVITE and second output refers to BYE message. And
the strange thing is that both messages arrive instantly, as soon as the
peer answers the phone. Why ??? I don't think this is correct, isn't it
?
Any hint ?
here goes my ser.cfg ...
[...]
# -- RADIUS ACC --
modparam("acc", "radius_config", "/etc/radiusclient.conf")
modparam("acc", "radius_flag", 1) modparam("acc",
"radius_missed_flag",
2) modparam("acc", "log_level", 1) modparam("acc",
"service_type", 15)
[...]
if (loose_route())
{
t_relay();
break;
};
if (uri==myself)
{
if (method=="REGISTER")
{
# Lo siguiente es para auth con RADIUS
if (!radius_www_authorize(""))
{
www_challenge("", "0");
break;
};
save("location");
break;
};
if (method=="INVITE")
{
setflag(1);
};
# native SIP destinations are handled using our USRLOC
DB
if (!lookup("location"))
{
sl_send_reply("404", "Not Found");
break;
};
};
t_relay();
[...]
Regards,
Lucas
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/2004
31 Dec
31 Dec
1:45 a.m.
Hi there
can you please post me a
grep Bye /etc/radiusclient/dictionary
you're using? I wish to know why your log
shows somewhat different than mine, which
you can see in this thread, here:
http://lists.iptel.org/pipermail/serusers/2004-November/013175.html
please take a look on it (just 3 messages)
to see if it helps on what you're facing.
I managed to get double Starts and single
Stops, but not much more.
Cheers
!3runo
P.S. BTW, are you using 0.8.14 or other SER version?
Lucas Aimaretto wrote:
Hi list. I have this problem. There's something
that's not working,
because, when ever I set up a call, I receive both messages INVITE and
BYE instantly. I think the correct way would it be to send Start
messages (Acct-Status-Type = Start) upon INVITEs and Stop messages
(Acct-Status-Type = Stop) upon BYEs. But this is not happening. Look ...
radrecv: Accounting Request from host c0a801fd code=4, id=205,
length=270
Acct-Status-Type = Start
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = Invite
User-Name = "1992001(a)192.168.1.253"
Calling-Station-Id = "sip:1992001@192.168.1.253:5060;user=phone"
Called-Station-Id = "sip:1992005@192.168.1.253:5060;user=phone"
Sip-Translated-Request-URI = "sip:1992005@192.168.1.178:11005"
Acct-Session-Id = "6dfb6640367b1ab7(a)192.168.1.113"
Sip-To-Tag = "54061171"
Sip-From-Tag = "39eeac148f846cb9"
Sip-CSeq = "1544"
NAS-IP-Address = 192.168.1.253
NAS-Port-Id = 5060
Acct-Delay-Time = 0
Sending Accounting Ack of id 205 to c0a801fd (nas linux)
radrecv: Accounting Request from host c0a801fd code=4, id=206,
length=270
Acct-Status-Type = Start
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = Bye
User-Name = "1992001(a)192.168.1.253"
Calling-Station-Id = "sip:1992001@192.168.1.253:5060;user=phone"
Called-Station-Id = "sip:1992005@192.168.1.253:5060;user=phone"
Sip-Translated-Request-URI = "sip:1992005@192.168.1.178:11005"
Acct-Session-Id = "6dfb6640367b1ab7(a)192.168.1.113"
Sip-To-Tag = "54061171"
Sip-From-Tag = "39eeac148f846cb9"
Sip-CSeq = "1544"
NAS-IP-Address = 192.168.1.253
NAS-Port-Id = 5060
Acct-Delay-Time = 0
Sending Accounting Ack of id 206 to c0a801fd (nas linux)
Do you see? ...Both outputs show an Acct-Status-Type = Start, but first
output refers to an INVITE and second output refers to BYE message. And
the strange thing is that both messages arrive instantly, as soon as the
peer answers the phone. Why??? I don't think this is correct, isn't it?
2:59 a.m.
Bruno,
Thanx for answering ...
can you please post me a
grep Bye /etc/radiusclient/dictionary
you're using? ...
[root@radius root]# grep Bye /etc/radiusclient/dictionary
VALUE Sip-Method Bye 4
VALUE Sip-Response-Code Bye 4
VALUE Sip-Method Bye 4
VALUE Sip-Response-Code Bye 4
I managed to get double Starts and single
Stops, but not much more.
That's what I want to get (at least) ... but it makes no sense to me. I
receive 2 Starts (but the first corresponds to an INVITE message and the
2nd to a BYE message :-s ). And when any of the users hang up, I receive
nothing.
Cheers
Regards,
Lucas
P.S. BTW, are you using 0.8.14 or other SER version?
version: 0.8.14 (i386/linux)
flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK,
SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535
@(#) $Id: main.c,v 1.168.4.3 2004/06/28 15:41:21 andrei Exp $ main.c
compiled on 16:02:31 Nov 10 2004 with gcc 2.96
Lucas Aimaretto wrote:
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/2004
Hi list. I have this problem. There's
something that's not working,
because, when ever I set up a call, I receive both messages
INVITE and
BYE instantly. I think the correct way would it
be to send Start
messages (Acct-Status-Type = Start) upon INVITEs and Stop messages
(Acct-Status-Type = Stop) upon BYEs. But this is not
happening. Look
...
radrecv: Accounting Request from host c0a801fd code=4, id=205,
length=270
Acct-Status-Type = Start
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = Invite
User-Name = "1992001(a)192.168.1.253"
Calling-Station-Id = "sip:1992001@192.168.1.253:5060;user=phone"
Called-Station-Id = "sip:1992005@192.168.1.253:5060;user=phone"
Sip-Translated-Request-URI = "sip:1992005@192.168.1.178:11005"
Acct-Session-Id = "6dfb6640367b1ab7(a)192.168.1.113"
Sip-To-Tag = "54061171"
Sip-From-Tag = "39eeac148f846cb9"
Sip-CSeq = "1544"
NAS-IP-Address = 192.168.1.253
NAS-Port-Id = 5060
Acct-Delay-Time = 0
Sending Accounting Ack of id 205 to c0a801fd (nas linux)
radrecv: Accounting Request from host c0a801fd code=4, id=206,
length=270
Acct-Status-Type = Start
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = Bye
User-Name = "1992001(a)192.168.1.253"
Calling-Station-Id = "sip:1992001@192.168.1.253:5060;user=phone"
Called-Station-Id = "sip:1992005@192.168.1.253:5060;user=phone"
Sip-Translated-Request-URI = "sip:1992005@192.168.1.178:11005"
Acct-Session-Id = "6dfb6640367b1ab7(a)192.168.1.113"
Sip-To-Tag = "54061171"
Sip-From-Tag = "39eeac148f846cb9"
Sip-CSeq = "1544"
NAS-IP-Address = 192.168.1.253
NAS-Port-Id = 5060
Acct-Delay-Time = 0
Sending Accounting Ack of id 206 to c0a801fd (nas linux)
Do you see? ...Both outputs show an Acct-Status-Type = Start, but
first output refers to an INVITE and second output refers to BYE
message. And the strange thing is that both messages arrive
instantly,
as soon as the peer answers the phone. Why??? I
don't think this is
correct, isn't it?
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/2004
14 Mar
14 Mar
11:20 p.m.
Guys,
I am having the same problem as you described. Did you get it solved?
Ray
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On
Behalf Of Lucas Aimaretto
Sent: Friday, December 31, 2004 6:00 AM
To: 'Bruno Lopes F. Cabral'; serusers(a)lists.iptel.org
Subject: RE: [Serusers] SER+Radius Accounting Not Working
Bruno,
Thanx for answering ...
can you please post me a
grep Bye /etc/radiusclient/dictionary
you're using? ...
[root@radius root]# grep Bye /etc/radiusclient/dictionary
VALUE Sip-Method Bye 4
VALUE Sip-Response-Code Bye 4
VALUE Sip-Method Bye 4
VALUE Sip-Response-Code Bye 4
I managed to get double Starts and single
Stops, but not much more.
That's what I want to get (at least) ... but it makes no sense to me. I
receive 2 Starts (but the first corresponds to an INVITE message and the
2nd to a BYE message :-s ). And when any of the users hang up, I receive
nothing.
Cheers
Regards,
Lucas
P.S. BTW, are you using 0.8.14 or other SER version?
version: 0.8.14 (i386/linux)
flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK,
SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535
@(#) $Id: main.c,v 1.168.4.3 2004/06/28 15:41:21 andrei Exp $ main.c
compiled on 16:02:31 Nov 10 2004 with gcc 2.96
Lucas Aimaretto wrote:
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/2004
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hi list. I have this problem. There's
something that's not working,
because, when ever I set up a call, I receive both messages
INVITE and
BYE instantly. I think the correct way would it
be to send Start
messages (Acct-Status-Type = Start) upon INVITEs and Stop messages
(Acct-Status-Type = Stop) upon BYEs. But this is not
happening. Look
...
radrecv: Accounting Request from host c0a801fd code=4, id=205,
length=270
Acct-Status-Type = Start
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = Invite
User-Name = "1992001(a)192.168.1.253"
Calling-Station-Id = "sip:1992001@192.168.1.253:5060;user=phone"
Called-Station-Id = "sip:1992005@192.168.1.253:5060;user=phone"
Sip-Translated-Request-URI = "sip:1992005@192.168.1.178:11005"
Acct-Session-Id = "6dfb6640367b1ab7(a)192.168.1.113"
Sip-To-Tag = "54061171"
Sip-From-Tag = "39eeac148f846cb9"
Sip-CSeq = "1544"
NAS-IP-Address = 192.168.1.253
NAS-Port-Id = 5060
Acct-Delay-Time = 0
Sending Accounting Ack of id 205 to c0a801fd (nas linux)
radrecv: Accounting Request from host c0a801fd code=4, id=206,
length=270
Acct-Status-Type = Start
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = Bye
User-Name = "1992001(a)192.168.1.253"
Calling-Station-Id = "sip:1992001@192.168.1.253:5060;user=phone"
Called-Station-Id = "sip:1992005@192.168.1.253:5060;user=phone"
Sip-Translated-Request-URI = "sip:1992005@192.168.1.178:11005"
Acct-Session-Id = "6dfb6640367b1ab7(a)192.168.1.113"
Sip-To-Tag = "54061171"
Sip-From-Tag = "39eeac148f846cb9"
Sip-CSeq = "1544"
NAS-IP-Address = 192.168.1.253
NAS-Port-Id = 5060
Acct-Delay-Time = 0
Sending Accounting Ack of id 206 to c0a801fd (nas linux)
Do you see? ...Both outputs show an Acct-Status-Type = Start, but
first output refers to an INVITE and second output refers to BYE
message. And the strange thing is that both messages arrive
instantly,
as soon as the peer answers the phone. Why??? I
don't think this is
correct, isn't it?
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 28/12/2004
6992
days inactive
7066
days old
3 comments
3 participants
participants (3)
-
Bruno Lopes F. Cabral -
Lucas Aimaretto -
Raymond Chen