23 Nov
2011
23 Nov
'11
10:35 p.m.
Hello,
keep the mailing list cc-ed, private messages from public mailing list
discussions are going to be discarded.
See the comments inline.
On 11/23/11 12:20 PM, Iurii Andamasov wrote:
Hello Daniel,
i
23.11.2011, в 8:43, Daniel-Constantin Mierla написал(а):
If you need to route all requests within a call through kamailio, then
you need to use loose routing (see rr module).
Maybe it would be easier for you to start with an existing example of
config, if the default config is too big to understand, maybe the one
from dispatcher is simpler:
http://kamailio.org/docs/modules/stable/modules_k/dispatcher.html#id2523004
It has the parts of routing requests within dialog, you need to replace
the part that uses dispatcher module with your forwarding to a specific
ip (or use dispatcher and have that ip as single destination there).
Before line 'route(DISPATCH);' add the condition to deny INVITEs that
don't match the trusted source ips:
if ( ! (src_ip == 10.46.1.121 || src_ip == 10.46.1.122 )) {
send_reply("403", "Forbidden");
exit;
}
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
Hello,
On 11/23/11 4:02 AM, Iurii Andamasov wrote:
seems that
occurs timeouts, from your next message i understand why,
what i need it just to pass call through kamailio from that 2 ips Hello list.
First of all sorry for dump question, i'm pretty new to kamailio so i hope someone
point me in right direction
currently i have one sip device which can handle sip request only from one ip,
my goal is to put kamailio in front of it so i can proxy requests from several ips
i added this to conf
route{
if ( src_ip == 10.46.1.121 || src_ip == 10.46.1.122 ) {
if(method == "INVITE") {
$rd="10.46.29.10";
t_relay();
}
}
and calls seems connecting but signaling is completely broken
i understand that i'm doing something wrong, but can't get what is wrong
can you explain what is broken and what you would expect to happen? 
23 Nov
23 Nov
10:50 p.m.
New subject: simple proxy
Hello,
sorry for private message and thanks for advice i will try.
23.11.2011, в 12:35, Daniel-Constantin Mierla написал(а):
Hello,
keep the mailing list cc-ed, private messages from public mailing list discussions are
going to be discarded.
See the comments inline.
On 11/23/11 12:20 PM, Iurii Andamasov wrote:
Hello Daniel,
i
23.11.2011, в 8:43, Daniel-Constantin Mierla написал(а):
If you need to route all requests within a call through kamailio, then you need to use
loose routing (see rr module).
Maybe it would be easier for you to start with an existing example of config, if the
default config is too big to understand, maybe the one from dispatcher is simpler:
http://kamailio.org/docs/modules/stable/modules_k/dispatcher.html#id2523004
It has the parts of routing requests within dialog, you need to replace the part that
uses dispatcher module with your forwarding to a specific ip (or use dispatcher and have
that ip as single destination there).
Before line 'route(DISPATCH);' add the condition to deny INVITEs that don't
match the trusted source ips:
if ( ! (src_ip == 10.46.1.121 || src_ip == 10.46.1.122 )) {
send_reply("403", "Forbidden");
exit;
}
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
Hello,
On 11/23/11 4:02 AM, Iurii Andamasov wrote:
seems that
occurs timeouts, from your next message i understand why,
what i need it just to pass call through kamailio from that 2 ips Hello list.
First of all sorry for dump question, i'm pretty new to kamailio so i hope someone
point me in right direction
currently i have one sip device which can handle sip request only from one ip,
my goal is to put kamailio in front of it so i can proxy requests from several ips
i added this to conf
route{
if ( src_ip == 10.46.1.121 || src_ip == 10.46.1.122 ) {
if(method == "INVITE") {
$rd="10.46.29.10";
t_relay();
}
}
and calls seems connecting but signaling is completely broken
i understand that i'm doing something wrong, but can't get what is wrong
can you explain what is broken and what you would expect to happen?
24 Nov
24 Nov
10:42 a.m.
New subject: simple proxy
Thanks a lot!
i was able adjust sample config to suite my needs,
now all is working as expected
Thanks!
23.11.2011, в 12:35, Daniel-Constantin Mierla написал(а):
Hello,
keep the mailing list cc-ed, private messages from public mailing list discussions are
going to be discarded.
See the comments inline.
On 11/23/11 12:20 PM, Iurii Andamasov wrote:
Hello Daniel,
i
23.11.2011, в 8:43, Daniel-Constantin Mierla написал(а):
If you need to route all requests within a call through kamailio, then you need to use
loose routing (see rr module).
Maybe it would be easier for you to start with an existing example of config, if the
default config is too big to understand, maybe the one from dispatcher is simpler:
http://kamailio.org/docs/modules/stable/modules_k/dispatcher.html#id2523004
It has the parts of routing requests within dialog, you need to replace the part that
uses dispatcher module with your forwarding to a specific ip (or use dispatcher and have
that ip as single destination there).
Before line 'route(DISPATCH);' add the condition to deny INVITEs that don't
match the trusted source ips:
if ( ! (src_ip == 10.46.1.121 || src_ip == 10.46.1.122 )) {
send_reply("403", "Forbidden");
exit;
}
Cheers,
Daniel
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
Hello,
On 11/23/11 4:02 AM, Iurii Andamasov wrote:
seems that
occurs timeouts, from your next message i understand why,
what i need it just to pass call through kamailio from that 2 ips Hello list.
First of all sorry for dump question, i'm pretty new to kamailio so i hope someone
point me in right direction
currently i have one sip device which can handle sip request only from one ip,
my goal is to put kamailio in front of it so i can proxy requests from several ips
i added this to conf
route{
if ( src_ip == 10.46.1.121 || src_ip == 10.46.1.122 ) {
if(method == "INVITE") {
$rd="10.46.29.10";
t_relay();
}
}
and calls seems connecting but signaling is completely broken
i understand that i'm doing something wrong, but can't get what is wrong
can you explain what is broken and what you would expect to happen?
4819
days inactive
4819
days old
2 comments
2 participants
participants (2)
-
Daniel-Constantin Mierla -
Iurii Andamasov