New subject: [Serusers] caller-id with raius using sip-rpid

4 Oct 2003

Calling from one ata to another, proxied and registered through ser,
here is my ngrep port 5060 output.  Remote-party-id is being set but not
the call-id.  

U 219.242.10.153:5060 -> 226.145.234.80:5060
  INVITE sip:256@226.145.234.80:5060;user=phone;transport=udp
SIP/2.0..Max-Fo
  rwards: 10..Record-Route:
<sip:256@219.242.10.153;ftag=2441840520;lr=on>..V
  ia: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c3976.0..Via:
SIP/2.0/
  UDP 226.145.234.113:5060;rport=5060..From:
sip:test@voip2.test.net;tag=24418
  40520..To: <sip:256@voip2.test.net;user=phone>..Call-ID:
2303820380(a)226.145.
  234.113..CSeq: 2 INVITE..Contact:
<sip:test@226.145.234.113:5060;transport=
  udp>..User-Agent: Cisco ATA 186  v2.16.2 ata18x
(030909a)..Authorization: D
  igest
username="test",realm="voip2.test.net",nonce="3f7de542de99d4e832372e6b

812a73562d346e6f",uri="sip:256@voip2.test.net",response="1a4552ce6c65333
439b
  6a97672f415a5"..Expires: 300..Content-Length: 271..Content-Type:
applicatio
  n/sdp..Remote-Party-ID:
222;party=calling;id-type=subscriber;screen=no....v
  =0..o=test 5648 5648 IN IP4 226.145.234.113..s=ATA186 Call..c=IN IP4
226.14
  5.234.113..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0
PCMU/8000/1..
  a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101
telephone-even
  t/8000..a=fmtp:101 0-15..a=direction:active..
#
U 226.145.234.80:5060 -> 219.242.10.153:5060
  SIP/2.0 100 Trying..Via: SIP/2.0/UDP
219.242.10.153;branch=z9hG4bK41f3.9e2c
  3976.0..Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060..From:
sip:test@vo
  ip2.test.net;tag=2441840520..To:
<sip:256@voip2.test.net;user=phone>;tag=2077
  559661..Call-ID: 2303820380@226.145.234.113..CSeq: 2 INVITE..Server:
Cisco
  ATA 186  v2.16.2 ata18x (030909a)..Content-Length: 0....

Subject: Re: [Serusers] caller-id with raius using sip-rpid

Is there any Remote-Party-ID header field in outgoing INVITE ? If so
then your gateway/whatever ignores it.

 Jan.

On 02-10 15:18, Steve Dolloff wrote:
...
  Any phone that supports caller-id.  But I haven't
gotten to work.  I'm
 seeing the username instead.  

 Subject: RE: [Serusers] caller-id with raius using sip-rpid

 Which phone device should I use to see caller ID
 information when using the ATA186?

 Alejandro

  --- Steve Dolloff &lt;sdolloff(a)noc.test.net&gt; escreveu: >
 At the top of the config I have the following
  statement....

         if (method=="INVITE") {
                 record_route();
                 if (!radius_www_authorize("")) {
                         log(1,"radius auth
 failure");

 www_challenge("voip2.test.net","0");
                         break;
                 };
                 append_rpid_hf();
 	   };

 If I call a phone with caller-id and my username is
 256, it shows 256 on
 the phone, if I call with a username of test, it
 shows 4534 on the
 handset even though I have the sip-rpid set to 222.

 Stephen

 Subject: Re: [Serusers] caller-id with raius using
 sip-rpid

 Retrieving caller-id when users register doesn't
 work because REGISTER
 messages are processed by the server and the server
 generates a reply
 only.

 What you need is to insert Remote-Party-ID header
 field into INVITE
 message, to make it work you must authenticate also
 INVITE messages.
 My guess is that you do not authenticate INVITE
 messages and therefore
 there is nothing append_rpid_hf can add.

   Jan.

 On 02-10 11:35, Steve Dolloff wrote:
  I want to retrieve the caller-id of a user from
 radius when they
  register and use it when I redirect an invite
 request to the voicemail
  system so that the voicemail system can route the
 call based on
  caller-id.  I also want to be able to send it to
 the sip gateway when
 I
  am routing calls to the pstn.

 I have this in my config currently and it doesn't  appear to set the
  caller-id in the invite message.

  rewritehostport("219.242.10.153:5061");

append_rpid_hf();
                                 t_relay();

 Subject: Re: [Serusers] caller-id with raius using  sip-rpid

 append_rpid_hf has no parameters. Version with 2  parameters is in
  unstable branch in the CVS only. What exactly do
 you want to do ?

   Jan.

 On 02-10 11:26, Steve Dolloff wrote:
 > I found this example in a previous Serusers  message.  

 append_rpid_hf("<sip:+",

"@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes");
...
    > 
 > I tried calling append_rpid_hf();, but it does  nothing.

 I also tried

append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes"
...
    > );  but I get an unknown command presumably
 because I am not using
 the
  > right number of parameters.
 > 
 > I only want to modify the calling-id info.
 > 
 > Can anyone provide an example?
 > 
 > -----Original Message-----
 > From: Jan Janak [mailto:jan@iptel.org] 
 > Sent: Thursday, October 02, 2003 11:09 AM
 > To: Steve Dolloff
 > Cc: serusers(a)lists.iptel.org
 > Subject: Re: [Serusers] caller-id with raius  using sip-rpid
  > 
 > If you want to add Remote-Party-ID header field  then you have to
 call
  > append_rpid_hf function in your script.
 > 
 >   Jan.
 > 
 > On 02-10 11:07, Steve Dolloff wrote:
 > > OK, I am setting up a Voicemail system (using  asterisk) and I am
  > > currently doing a
rewritehostport(ip:port) and  then trelay() to
 send
  > it
 > > to the voicemail system if an invite fails.
 > > 
 > > Should I change something? See my ser.cfg and  output from the call
  to
 > > the vm.
 > > 
 > > Here is the code from ser.cfg
 > > 
 > >
 > rewritehostport("219.242.10.153:5061");
 > >                                 t_relay();
 > > 
 > > Here is the sip info from asterisk.
 > > 
 > >  INVITE sip:200@219.242.10.153:5061;user=phone  SIP/2.0
  > > Max-Forwards: 10
 > > Record-Route:  <sip:200@219.242.10.153;ftag=2236658534;lr=on>
  > > Via: SIP/2.0/UDP 
219.242.10.153;branch=z9hG4bK13de.31901234.0
  > > Via: SIP/2.0/UDP 
226.145.234.113:5060;rport=5060
  > > From:
sip:test@voip2.test.net;tag=2236658534
 > > To: <sip:200@voip2.test.net;user=phone>
 > > Call-ID: 2218108971(a)226.145.234.113
 > > CSeq: 1 INVITE
 > > Contact:  <sip:test@226.145.234.113:5060;transport=udp>
  > > User-Agent: Cisco ATA 186  v2.16.2
ata18x  (030909a)
  > > Expires: 300
 > > Content-Length: 271
 > > Content-Type: application/sdp
 > > 
 > > 
 > > 
 > > Subject: Re: [Serusers] caller-id with raius  using sip-rpid
  > > 
 > > Remote-Party-ID header field is inserted into  forwarded requests,
  not
 > > responses.
 > > 
 > >  Jan.
 > > 
 > > On 02-10 10:53, Steve Dolloff wrote:
 > > > Ser doesn't appear to be passing the  Caller-id to the ata at
 auth
  or
 > I
 > > > am doing something wrong.  Can anyone point  me in the right
  > direction?
 > > > 
 > > > Thanks,
 > > > 
 > > > Stephen
 > > > 
 > > > I have the following entry in my freeradius  users file.
  > > > 
 > > > test(a)voip2.test.net Auth-Type := Digest,  User-Password ==
"test"
  > > >         Reply-Message =
"Hello, test with  digest", Sip-Rpid =
  > > > "8472222222"
 > > > 
 > > > When I run a radclient test I get the  correct info..
  > > > 
 > > > radclient -f digest.test 219.242.10.153:1812  auth testing
  > > > Received response ID 134, code 2,
length =  57
   === message truncated === 

 Yahoo! Mail - o melhor webmail do Brasil
 http://mail.yahoo.com.br 