[Serusers] Can not see Acct-Status-Type = Stop - sr-users

28 Dec 2004

Hi list. I have this problem. There's something that's not working,
because, when ever I set up a call, I receive both messages INVITE and
BYE instantly. I think the correct way would it be to send a Start
messages (Acct-Status-Type = Start) upon INVITEs and a Stop messages
(Acct-Status-Type = Stop) upon BYEs. But this is not happening. Look ...

radrecv: Accounting Request from host c0a801fd code=4, id=205,
length=270
    Acct-Status-Type = Start
    Service-Type = Sip-Session
    Sip-Response-Code = 200
    Sip-Method = Invite
    User-Name = &quot;1992001(a)192.168.1.253&quot;
    Calling-Station-Id = "sip:1992001@192.168.1.253:5060;user=phone"
    Called-Station-Id = "sip:1992005@192.168.1.253:5060;user=phone"
    Sip-Translated-Request-URI = "sip:1992005@192.168.1.178:11005"
    Acct-Session-Id = &quot;6dfb6640367b1ab7(a)192.168.1.113&quot;
    Sip-To-Tag = "54061171"
    Sip-From-Tag = "39eeac148f846cb9"
    Sip-CSeq = "1544"
    NAS-IP-Address = 192.168.1.253
    NAS-Port-Id = 5060
    Acct-Delay-Time = 0
Sending Accounting Ack of id 205 to c0a801fd (nas linux)

radrecv: Accounting Request from host c0a801fd code=4, id=206,
length=270
    Acct-Status-Type = Start
    Service-Type = Sip-Session
    Sip-Response-Code = 200
    Sip-Method = Bye
    User-Name = &quot;1992001(a)192.168.1.253&quot;
    Calling-Station-Id = "sip:1992001@192.168.1.253:5060;user=phone"
    Called-Station-Id = "sip:1992005@192.168.1.253:5060;user=phone"
    Sip-Translated-Request-URI = "sip:1992005@192.168.1.178:11005"
    Acct-Session-Id = &quot;6dfb6640367b1ab7(a)192.168.1.113&quot;
    Sip-To-Tag = "54061171"
    Sip-From-Tag = "39eeac148f846cb9"
    Sip-CSeq = "1544"
    NAS-IP-Address = 192.168.1.253
    NAS-Port-Id = 5060
    Acct-Delay-Time = 0
Sending Accounting Ack of id 206 to c0a801fd (nas linux)

Do you see ? ...Both outputs show an Acct-Status-Type = Start, but first
output refers to an INVITE and second output refers to BYE message. I
don't think this is correct, isn't it ?

Any hint ?

here goes my ser.cfg ...

[...]

# -- RADIUS ACC --
modparam("acc", "radius_config", "/etc/radiusclient.conf")
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 2)
modparam("acc", "log_level", 1)
modparam("acc", "service_type", 15)

[...]

if (loose_route())
        {
                t_relay();
                break;
        };

if (uri==myself)
        {

                if (method=="REGISTER")
                {

                        # Lo siguiente es para auth con RADIUS
                        if (!radius_www_authorize(""))
                        {
                                www_challenge("", "0");
                                break;
                        };
                        save("location");
                        break;
                };

                if (method=="INVITE")
                {
                    setflag(1);
                };

                # native SIP destinations are handled using our USRLOC
DB
                if (!lookup("location"))
                {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };

        t_relay();

[...]

Regards,

Lucas

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.5 - Release Date: 26/12/2004