18 Apr
2003
18 Apr
'03
11:49 a.m.
instead of t_relay_to("xxx.xxx.xxx.xxx","5060"); try
rewritehostport("xxx.xxx.xxx.xxx:5060");
-----Original Message-----
From: budi wibowo [mailto:bu1d@yahoo.com]
Sent: Friday, April 18, 2003 09:54
To: serusers(a)lists.iptel.org
Subject: [Serusers] pstn connectivity
hi i'm new guy in this list
and i have a litle problem with connectivity to psnt
thru cisco as5300
below is my ser.cfg, yyy.yyy.yyy.yyy is ip of ser and
xx.xxx.xxx.xxx is ip of the cisco gw
if (uri=~"^sip:[0-9]*@yyy.yyy.yyy.yyy"){
log("Forward to pstn \n");
t_relay_to("xxx.xxx.xxx.xxx","5060");
break;
};
and i have this on my cisco
!
dial-peer voice 4 voip
incoming called number .
destination-pattern 2525T
session protocol sipv2
session target sip-server
codec g723r63
!
!
sip-ua
calling-info sip-to-pstn number set 113950029
sip-server ipv4:yyy.yyy.yy.yyyy
!
my pproblem is.. i cant if i dial to 252544123 from my
softphone , it's not work
but when i dial with format 252544123(a)xxx.xxx.xxx.xxx
it always work
anyone have clue for my problem?
thx
budi
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
19 Apr
19 Apr
4:31 a.m.
New subject: [Serusers] pstn connectivity
dear all i repeat my problem
- pc running ser with ip 111.111.111.111
- cisco 5350 with dial-peer to sip-server with ip
222.222.222.222
- remote pc running sip softphone
i have read austin how to.. regarding how to connect
to cisco gw
but it's not work
example ..i want to dial to singapore with pattern 113
if i dial from my softphone 1136523456 it always
failed, but if dial using 1136523456(a)222.222.222.222
it always work .
is there anything missing on my config?
rgds
budi
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
4:44 a.m.
New subject: [Serusers] pstn connectivity
Sounds like you softphone do not know where to send a request if you omit the
host part. Is the request sent by the softphone if you omit the host part? Is
the request received at the server? Do the server deliver the request if it
received it? and so on and on and on...
Greetings
Nils
On Saturday 19 April 2003 04:31, budi wibowo wrote:
dear all i repeat my problem
- pc running ser with ip 111.111.111.111
- cisco 5350 with dial-peer to sip-server with ip
222.222.222.222
- remote pc running sip softphone
i have read austin how to.. regarding how to connect
to cisco gw
but it's not work
example ..i want to dial to singapore with pattern 113
if i dial from my softphone 1136523456 it always
failed, but if dial using 1136523456(a)222.222.222.222
it always work .
is there anything missing on my config?
rgds
budi
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
4:52 a.m.
New subject: [Serusers] pstn connectivity
- the request sent by the softphone
- to check the request on server ..how i do that
- i do debug ccsip all on my gateway and i saw
something uncomplete for the request , like the
translation rule not work properly
but i include the ip of cisco gw eerything is normal
any clue? or any suggestion which softphone i should
use?
boedz
--- Nils Ohlmeier <nils(a)iptel.org> wrote:
Sounds like you softphone do not know where to send
a request if you omit the
host part. Is the request sent by the softphone if
you omit the host part? Is
the request received at the server? Do the server
deliver the request if it
received it? and so on and on and on...
Greetings
Nils
On Saturday 19 April 2003 04:31, budi wibowo wrote:
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
dear all i repeat my problem
- pc running ser with ip 111.111.111.111
- cisco 5350 with dial-peer to sip-server with ip
222.222.222.222
- remote pc running sip softphone
i have read austin how to.. regarding how to
connect
to cisco gw
but it's not work
example ..i want to dial to singapore with pattern
113
if i dial from my softphone 1136523456 it always
failed, but if dial using
1136523456(a)222.222.222.222
> it always work .
> is there anything missing on my config?
>
>
> rgds
>
> budi 
8:38 p.m.
New subject: [Serusers] pstn connectivity
Hi Budi,
You can try this, I tested on my side and its
work. Also you need to get a 12.2.X or higher image in
cisco to make it work. I found older version have
problem running sip.
In the /etc/ser/ser.cfg, You can try to put this
# Uncomment this if you want to use digest
authentication
if
(!www_authorize("mydomain.net", "subscriber")) {
www_challenge("mydomain.net", "0");
break;
};
save("location");
break;
};
# Hand off to cisco
if
(uri=~"^sip:123[0-9]*@mydomain.net") {
log("Forwarding to PSTN\n");
t_relay_to("111.111.111.111",
"5060");
break;
};
Hope this help,
Trung
--- budi wibowo <bu1d(a)yahoo.com> wrote:
dear all i repeat my problem
- pc running ser with ip 111.111.111.111
- cisco 5350 with dial-peer to sip-server with ip
222.222.222.222
- remote pc running sip softphone
i have read austin how to.. regarding how to connect
to cisco gw
but it's not work
example ..i want to dial to singapore with pattern
113
if i dial from my softphone 1136523456 it always
failed, but if dial using 1136523456(a)222.222.222.222
it always work .
is there anything missing on my config?
rgds
budi
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
20 Apr
20 Apr
5:03 p.m.
New subject: [Serusers] pstn connectivity
maybe decsribing your problem would help better than repeating it.
What does it mean it does not work? How are message dumps?
(I thought the previous proposal on the mailing list would fix
the issue I would guess too to be misconfigured in your installation
-- did you do it?)
-Jiri
At 04:31 AM 4/19/2003, budi wibowo wrote:
dear all i repeat my problem
- pc running ser with ip 111.111.111.111
- cisco 5350 with dial-peer to sip-server with ip
222.222.222.222
- remote pc running sip softphone
i have read austin how to.. regarding how to connect
to cisco gw
but it's not work
example ..i want to dial to singapore with pattern 113
if i dial from my softphone 1136523456 it always
failed, but if dial using 1136523456(a)222.222.222.222
it always work .
is there anything missing on my config?
rgds
budi
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
21 Apr
21 Apr
4:19 a.m.
New subject: [Serusers] pstn connectivity
does not work means .i cant forward call from my
softphone. i always have to put number as
1136523456(a)222.222.222.222 instead of 1136523456 at my
softphone
--- "serhelp (Jiri)" <serhelp(a)lists.iptel.org> wrote:
maybe decsribing your problem would help better than
repeating it.
What does it mean it does not work? How are message
dumps?
(I thought the previous proposal on the mailing
list would fix
the issue I would guess too to be misconfigured in
your installation
-- did you do it?)
-Jiri
At 04:31 AM 4/19/2003, budi wibowo wrote:
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
dear all i repeat my problem
- pc running ser with ip 111.111.111.111
- cisco 5350 with dial-peer to sip-server with ip
222.222.222.222
- remote pc running sip softphone
i have read austin how to.. regarding how to
connect
to cisco gw
but it's not work
example ..i want to dial to singapore with pattern
113
if i dial from my softphone 1136523456 it always
failed, but if dial using
1136523456(a)222.222.222.222
it always work .
is there anything missing on my config?
rgds
budi
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
4:55 a.m.
New subject: [Serusers] pstn connectivity
Excuse my roughness but you problem description is somewhat like "i always
have to enter bu1d(a)yahoo.com into my email client instead of just bu1d.
what's wrong". (We are not the windows help desk here.)
Because most of the readers here are no gods, probably nobody can guess from
such a simple problem description whats wrong.
Do it like this:
"
My enviroment looks like this:
softphone ---- ser --- pstn-gw
x.x.x.x y.y.y.y z.z.z.z
I want this and that...
This is working...
But that not... I verified with ngrep (see 1.8 at Dan's How-To if you really
read it) that the request are going from my softphone to ser, but then not
further to the pstn-gateway.
Please find attached my Ser configuration, the network dumps (taken with ngrep
or tcpdump) and the ser log file.
"
To your problem: because i (sadly) have no crystal ball i have to guess that
you configured the ser hosts as the outgoing proxy for your softphone. But
how should Ser know where to route a request if the host part is missing in
the request uri? You have to configure Ser appropriatly!
But without a crystall ball or your Ser configuration we can not magicly
create a configuration which fits your requirements. Guess what you should
send us :-)
Regards
Nils Ohlmeier
On Monday 21 April 2003 04:19, budi wibowo wrote:
does not work means .i cant forward call from my
softphone. i always have to put number as
1136523456(a)222.222.222.222 instead of 1136523456 at my
softphone
--- "serhelp (Jiri)" <serhelp(a)lists.iptel.org> wrote:
maybe decsribing your problem would help better
than
repeating it.
What does it mean it does not work? How are message
dumps?
(I thought the previous proposal on the mailing
list would fix
the issue I would guess too to be misconfigured in
your installation
-- did you do it?)
-Jiri
At 04:31 AM 4/19/2003, budi wibowo wrote:
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers dear all i repeat my problem
- pc running ser with ip 111.111.111.111
- cisco 5350 with dial-peer to sip-server with ip
222.222.222.222
- remote pc running sip softphone
i have read austin how to.. regarding how to
connect
to cisco gw
but it's not work
example ..i want to dial to singapore with pattern
113
if i dial from my softphone 1136523456 it always
failed, but if dial using
1136523456(a)222.222.222.222
it always work .
is there anything missing on my config?
rgds
budi
__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7682
days inactive
7685
days old
7 comments
5 participants
participants (5)
-
budi wibowo -
LeeCC, Kenny -
Nils Ohlmeier -
serhelp (Jiri) -
trung nguyen