Hi, I am having problem getting radius accounting to work. My problem is that radius detail file is not written to /var/log/radius/radacct/ in fact there is no radius accounting at all, strangely I do have radius.log (radius setup seems to be fine as I could get detail accounting from my dialup NAS) I am running "ser-0.8.11, freeradius-0.9.3 & radiusclient-0.3.2". Here is my ser.cfg # # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=9 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") modparam("auth_radius", "service_type", 15) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # related to radius acct modparam("acc", "log_level", 1) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) # if (uri==myself) { if (uri=~"") { if (method=="REGISTER") { log(1, "Register: Authenticating user\n"); # Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { log(1, "Register: Challenging user\n"); www_challenge("", "0"); break; }; save("location"); break; }; if (method=="INVITE") { log(1, "INVITE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } Suggestions anyone?? Regards, Anthony _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

Hello, does your radius server gets any radius messages from ser ? Try to start the radius server with -X parameter, the server will stay in foreground and print a lot of debugging information. Try to make a call then to see if there is any communication between radiusclient library and radius server. Also check the radius howto available at http://iptel.org/ser Jan. On 16-12 13:02, Anthony Law wrote: > Hi, > > I am having problem getting radius accounting to work. My problem is

> radius detail file is not written to /var/log/radius/radacct/ in fact

> is no radius accounting at all, strangely I do have radius.log (radius

> seems to be fine as I could get detail accounting from my dialup NAS) I

> running "ser-0.8.11, freeradius-0.9.3 & radiusclient-0.3.2". > Here is my ser.cfg > > # > # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > debug=9 # debug level (cmd line: -dddddddddd) > fork=yes > log_stderror=no # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > debug=9 > fork=no > log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > #port=5060 > #children=4 > fifo="/tmp/ser_fifo" > > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > #loadmodule "/usr/local/lib/ser/modules/mysql.so" > > loadmodule "/usr/local/lib/ser/modules/sl.so" > loadmodule "/usr/local/lib/ser/modules/tm.so" > loadmodule "/usr/local/lib/ser/modules/rr.so" > loadmodule "/usr/local/lib/ser/modules/acc.so" > loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > loadmodule "/usr/local/lib/ser/modules/usrloc.so" > loadmodule "/usr/local/lib/ser/modules/registrar.so" > > # Uncomment this if you want digest authentication > # mysql.so must be loaded ! > #loadmodule "/usr/local/lib/ser/modules/auth.so" > #loadmodule "/usr/local/lib/ser/modules/auth_db.so" > loadmodule "/usr/local/lib/ser/modules/auth.so" > loadmodule "/usr/local/lib/ser/modules/auth_radius.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > > modparam("usrloc", "db_mode", 0) > > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > #modparam("usrloc", "db_mode", 2) > > # -- auth params -- > # Uncomment if you are using auth module > # > #modparam("auth_db", "calculate_ha1", yes) > modparam("auth_radius", "radius_config", > "/usr/local/etc/radiusclient/radiusclient.conf") > modparam("acc", "radius_config", > "/usr/local/etc/radiusclient/radiusclient.conf") > > # If you set "calculate_ha1" parameter to yes (which true in this

> # uncomment also the following parameter) > # > #modparam("auth_db", "password_column", "password") > modparam("auth_radius", "service_type", 15) > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # related to radius acct > modparam("acc", "log_level", 1) > modparam("acc", "radius_flag", 1) > modparam("acc", "radius_missed_flag", 3) > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (len_gt( max_len )) { > sl_send_reply("513", "Message too big"); > break; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > record_route(); > # loose-route processing > if (loose_route()) { > t_relay(); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > # if (uri==myself) { > if (uri=~"") { > if (method=="REGISTER") { > log(1, "Register: Authenticating user\n"); > # Uncomment this if you want to use digest authentication > if (!radius_www_authorize("")) { > log(1, "Register: Challenging user\n"); > www_challenge("", "0"); > break; > }; > > save("location"); > break; > }; > > if (method=="INVITE") { > > log(1, "INVITE\n"); > setflag(1); /* set for accounting (the same value as in > log_flag!) */ > }; > > if (method=="MESSAGE") { > log(1, "MESSAGE\n"); > setflag(1); /* set for accounting (the same value as in > log_flag!) */ > }; > > if (method=="BYE" || method=="CANCEL") { > log (1, "BYE or CANCEL\n"); > setflag(1); > }; > # native SIP destinations are handled using our USRLOC