I moved ser from inside my office to a public IP address. When I use X-Lite it connects to ser, tries to login anonymously and ser sends back the Unauthorized packet. When it was in the office X-Lite would then send the name/password and login. It doesn't do that now.
I'm using a LinkSys router. When the packet comes back to the LinkSys router from ser it hits the LinkSys at port 5060. I don't believe that's correct but I can't figure out how to correct it.
I enabled nathelper but am not sure what to do next.
Also, where is the documentation for the nat_uac_test? I can't find a single refererence to that in my source code anywhere.
Bill
Bill wrote:
I moved ser from inside my office to a public IP address. When I useX-Lite it connects to ser, tries to login anonymously and ser sends back the Unauthorized packet. When it was in the office X-Lite would then send the name/password and login. It doesn't do that now.
when starting x-lite it uses STUN to detect the NAT-methode of your router. Press F9 in xlite to open the debug window. On top of the debug messages, xlite writes the kind of the detected NAT-style, e.g. in my case: Discovered Symmetric NAT Firewall
What kind of NAT is the LinkSys router?
I'm using a LinkSys router. When the packet comes back to the LinkSysrouter from ser it hits the LinkSys at port 5060. I don't believe that's correct but I can't figure out how to correct it.
force_rport in ser.cfg should correct this.
I enabled nathelper but am not sure what to do next. Also, where is the documentation for the nat_uac_test? I can't find asingle refererence to that in my source code anywhere.
the documentation is sometimes out of date. http://lists.iptel.org/pipermail/serdev/2003-December/000921.html
you can also take a look at the configuration files in http://lists.iptel.org/pipermail/serusers/2004-February/005996.html
regards klaus
Hi,
I have made changes in default ser.cfg to use mySql and for Auth. I have attached ser.cfg. After doing these changes I am getting 1 error. When I issue cmd:: /etc/init.d/ser start Or /etc/init.d/ser restart
Then following err comes:: Bag cfg, 1 error.
Can anyone help?
Rgds- Vanita Jain
Hi
I would take a look in /var/log/messages to find which particular line is causing the problem.
Stephen
Vanita Jain wrote:
Hi,
I have made changes in default ser.cfg to use mySql and for Auth. I have attached ser.cfg. After doing these changes I am getting 1 error. When I issue cmd:: /etc/init.d/ser start Or /etc/init.d/ser restart
Then following err comes:: Bag cfg, 1 error.
Can anyone help?
Rgds- Vanita Jain
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Or you can try starting ser in debug mode by using the following
ser -DEddddd
Bill Dunn
----- Original Message ----- From: Stephen Kingham To: Vanita Jain Cc: serusers@lists.iptel.org Sent: Monday, June 28, 2004 7:43 PM Subject: Re: [Serusers] Auth and Mysql support::
Hi
I would take a look in /var/log/messages to find which particular line is causing the problem.
Stephen
Vanita Jain wrote:
Hi,
I have made changes in default ser.cfg to use mySql and for Auth. I have attached ser.cfg. After doing these changes I am getting 1 error. When I issue cmd:: /etc/init.d/ser start Or /etc/init.d/ser restart
Then following err comes:: Bag cfg, 1 error.
Can anyone help?
Rgds- Vanita Jain
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Stephen Kingham, MIT, BSc, E&C Cert Project Manager and Consulting Engineer mailto:Stephen.Kingham@aarnet.edu.au Telephone +61 2 6222 3575 (office) +61 419 417 471 (mobile) Voice and Video over IP for The Australian Academic Research Network (AARNet) and http://www.aarnet.edu.au
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Bill -
Klaus Darilion -
Stephen Kingham -
Vanita Jain