23 Dec
2009
23 Dec
'09
6:28 a.m.
Hello,
I'm attempting to use the following in Kamailio:
$(hdr(from){re.subst,/(.*?);(.*)/\1/}) --- however it does not match /
replace, with this from header sample:
From: <sip:714364XXXX@XX.XX.XX.XX
;pstn-params=808282808882;cpc=unknown>;tag=gK0b53f6d9
However if this is fully pcre compatible, then I am a bit lost as I've
checked the results in php, perl, and python produces:
From: <sip:714364XXXX@XX.XX.XX.XX (expected result)
However, Kamailio does not match / replace / etc using the following:
xlog("L_INFO", "Test From Header Regex:
$(hdr(from){re.subst,/(.*?);(.*)/\1/})");
Code Samples / Regex Pattern Replacements:
PHP: http://codepad.org/CUttQH1r
Perl: http://codepad.org/ZfAO4X5v
Python: http://codepad.org/T14SYWkZ
Any comments / help / etc is always appreciated, look forward to hearing
back from you all!
Sincerely,
Brandon Armstead
23 Dec
23 Dec
8:29 a.m.
El Miércoles, 23 de Diciembre de 2009, Brandon Armstead escribió:
Hello,
I'm attempting to use the following in Kamailio:
$(hdr(from){re.subst,/(.*?);(.*)/\1/}) --- however it does not match /
replace, with this from header sample:
From: <sip:714364XXXX@XX.XX.XX.XX
;pstn-params=808282808882;cpc=unknown>;tag=gK0b53f6d9
However if this is fully pcre compatible, then I am a bit lost as I've
checked the results in php, perl, and python produces:
From: <sip:714364XXXX@XX.XX.XX.XX (expected result)
However, Kamailio does not match / replace / etc using the following:
xlog("L_INFO", "Test From Header Regex:
$(hdr(from){re.subst,/(.*?);(.*)/\1/})");
You are right. However, could you try by replacing "(.*?)" with
"([^;]*)" ?
The result should be the same.
I suspect that "*?" is not supported in Kamailio regular expressions.
--
Iñaki Baz Castillo <ibc(a)aliax.net>
10:04 a.m.
On 12/23/09 8:29 AM, Iñaki Baz Castillo wrote:
El Miércoles, 23 de Diciembre de 2009, Brandon
Armstead escribió:
the re.subst transformation uses Posix regexp for matching, only the
format of the command is perl-like. I implemented this because textops
has no dependency of extra libraries than core and I wanted to keep it so.
Maybe is good to add a pcre.subst transformation in regex module to be
able to use extended regexp formats given by libpcre.
Cheers,
Daniel
--
Daniel-Constantin Mierla
* http://www.asipto.com/
Hello,
I'm attempting to use the following in Kamailio:
$(hdr(from){re.subst,/(.*?);(.*)/\1/}) --- however it does not match /
replace, with this from header sample:
From:<sip:714364XXXX@XX.XX.XX.XX
;pstn-params=808282808882;cpc=unknown>;tag=gK0b53f6d9
However if this is fully pcre compatible, then I am a bit lost as I've
checked the results in php, perl, and python produces:
From:<sip:714364XXXX@XX.XX.XX.XX (expected result)
However, Kamailio does not match / replace / etc using the following:
xlog("L_INFO", "Test From Header Regex:
$(hdr(from){re.subst,/(.*?);(.*)/\1/})");
You are right. However, could you try by replacing "(.*?)" with
"([^;]*)" ?
The result should be the same.
I suspect that "*?" is not supported in Kamailio regular expressions.
24 Dec
24 Dec
3:31 a.m.
El Miércoles, 23 de Diciembre de 2009, Daniel-Constantin Mierla escribió:
the re.subst transformation uses Posix regexp for
matching, only the
format of the command is perl-like. I implemented this because textops
has no dependency of extra libraries than core and I wanted to keep it so.
Maybe is good to add a pcre.subst transformation in regex module to be
able to use extended regexp formats given by libpcre.
I¡ll try to implement it when I get some spare time :)
--
Iñaki Baz Castillo <ibc(a)aliax.net>
27 Apr
27 Apr
2:33 a.m.
Hello All,
I hate to dig-up this older mailing list entry. However I am some
additional trouble with what I believe is a completely posix-only regex.
xlog("L_INFO", "[$ci] m=audio $(rb{re.subst,/(.*)m=audio(.*)/\2/})");
I would expect to give me the port from the m=audio line, however it does
not -- it simply removes m=audio.
Any thoughts / ideas / suggestions?
Sincerely,
Brandon Armstead
On Wed, Dec 23, 2009 at 9:31 PM, Iñaki Baz Castillo <ibc(a)aliax.net> wrote:
El Miércoles, 23 de Diciembre de 2009,
Daniel-Constantin Mierla escribió:
the re.subst transformation uses Posix regexp for
matching, only the
format of the command is perl-like. I implemented this because textops
has no dependency of extra libraries than core and I wanted to keep it
so.
Maybe is good to add a pcre.subst transformation in regex module to be
able to use extended regexp formats given by libpcre.
I¡ll try to implement it when I get some spare time :)
--
Iñaki Baz Castillo <ibc(a)aliax.net>
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
2:35 a.m.
Hello All,
Correction, it seems both the last supplied regex and xlog("L_INFO",
"[$ci] m=audio $(rb{re.subst,/(.*)m=audio ([0-9]+) (.*)/\2/})"); return the
same invalid results.
Thanks again!
Sincerely,
Brandon Armstead
On Mon, Apr 26, 2010 at 7:33 PM, Brandon Armstead <brandon(a)cryy.com> wrote:
Hello All,
I hate to dig-up this older mailing list entry. However I am some
additional trouble with what I believe is a completely posix-only regex.
xlog("L_INFO", "[$ci] m=audio
$(rb{re.subst,/(.*)m=audio(.*)/\2/})");
I would expect to give me the port from the m=audio line, however it does
not -- it simply removes m=audio.
Any thoughts / ideas / suggestions?
Sincerely,
Brandon Armstead
On Wed, Dec 23, 2009 at 9:31 PM, Iñaki Baz Castillo <ibc(a)aliax.net> wrote:
El Miércoles, 23 de Diciembre de 2009,
Daniel-Constantin Mierla escribió:
the re.subst transformation uses Posix regexp for
matching, only the
format of the command is perl-like. I implemented this because textops
has no dependency of extra libraries than core and I wanted to keep it
so.
Maybe is good to add a pcre.subst transformation in regex module to be
able to use extended regexp formats given by libpcre.
I¡ll try to implement it when I get some spare time :)
--
Iñaki Baz Castillo <ibc(a)aliax.net>
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
28 Apr
28 Apr
10:54 p.m.
Hello,
can you paste here the sip message and the result of the substitution?
It will help to troubleshoot if is something wrong there.
Cheers,
Daniel
On 4/27/10 2:35 AM, Brandon Armstead wrote:
Hello All,
Correction, it seems both the last supplied regex and xlog("L_INFO",
"[$ci] m=audio $(rb{re.subst,/(.*)m=audio ([0-9]+) (.*)/\2/})");
return the same invalid results.
Thanks again!
Sincerely,
Brandon Armstead
On Mon, Apr 26, 2010 at 7:33 PM, Brandon Armstead <brandon(a)cryy.com
<mailto:brandon@cryy.com>> wrote:
Hello All,
I hate to dig-up this older mailing list entry. However I am
some additional trouble with what I believe is a completely
posix-only regex.
xlog("L_INFO", "[$ci] m=audio
$(rb{re.subst,/(.*)m=audio(.*)/\2/})");
I would expect to give me the port from the m=audio line, however
it does not -- it simply removes m=audio.
Any thoughts / ideas / suggestions?
Sincerely,
Brandon Armstead
On Wed, Dec 23, 2009 at 9:31 PM, Iñaki Baz Castillo <ibc(a)aliax.net
<mailto:ibc@aliax.net>> wrote:
El Miércoles, 23 de Diciembre de 2009, Daniel-Constantin
Mierla escribió:
--
Daniel-Constantin Mierla
* http://www.asipto.com/
* http://twitter.com/miconda
* http://www.linkedin.com/in/danielconstantinmierla
the re.subst transformation uses Posix regexp for
matching,
only the
format of the command is perl-like. I implemented
this
because textops
has no dependency of extra libraries than core
and I wanted
to keep it so.
Maybe is good to add a pcre.subst transformation in regex
module to be
able to use extended regexp formats given by
libpcre.
I¡ll try to implement it when I get some spare time :)
--
Iñaki Baz Castillo <ibc(a)aliax.net <mailto:ibc@aliax.net>>
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org <mailto:Users@lists.kamailio.org>
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
29 Apr
29 Apr
10:21 p.m.
Daniel,
Here is the XLOG output, the top log is the unmodified version and the
bottom is the modified version.
xlog("L_INFO", "[$ci] $rb") OUTPUTS:
Apr 29 20:17:23 sip-core02 /sbin/kamailio[23550]: [
6db72a2f-7e263847(a)192.168.1.75] v=0#015#012o=- 24986155 24986155 IN IP4
99.21.137.236#015#012s=-#015#012c=IN IP4 174.37.45.134#015#012t=0
0#015#012m=audio 55630 RTP/AVP 0 2 4 8 18 96 97 98 101#015#012a=rtpmap:0
PCMU/8000#015#012a=rtpmap:2 G726-32/8000#015#012a=rtpmap:4
G723/8000#015#012a=rtpmap:8 PCMA/8000#015#012a=rtpmap:18
G729a/8000#015#012a=rtpmap:96 G726-40/8000#015#012a=rtpmap:97
G726-24/8000#015#012a=rtpmap:98 G726-16/8000#015#012a=rtpmap:101
telephone-event/8000#015#012a=fmtp:101
0-15#015#012a=ptime:30#015#012a=sendrecv#015#012a=nortpproxy:yes#015
xlog("L_INFO", "[$ci] $(rb{re.subst,/^(.*)m=audio
([0-9]+)(.*)$/\2/})")
OUTPUTS:
Apr 29 20:17:23 sip-core02 /sbin/kamailio[23550]: [
6db72a2f-7e263847(a)192.168.1.75] v=0#015#012o=- 24986155 24986155 IN IP4
99.21.137.236#015#012s=-#015#012c=IN IP4 174.37.45.134#015#012t=0
0#015#01255630#012a=rtpmap:0 PCMU/8000#015#012a=rtpmap:2
G726-32/8000#015#012a=rtpmap:4 G723/8000#015#012a=rtpmap:8
PCMA/8000#015#012a=rtpmap:18 G729a/8000#015#012a=rtpmap:96
G726-40/8000#015#012a=rtpmap:97 G726-24/8000#015#012a=rtpmap:98
G726-16/8000#015#012a=rtpmap:101 telephone-event/8000#015#012a=fmtp:101
0-15#015#012a=ptime:30#015#012a=sendrecv#015#012a=nortpproxy:yes#015
As for the actual INVITE / SDP BODY:
v=0.
o=- 24986155 24986155 IN IP4 99.21.XXX.XXX.
s=-.
c=IN IP4 174.37.XX.XXX.
t=0 0.
m=audio 55630 RTP/AVP 0 2 4 8 18 96 97 98 101.
a=rtpmap:0 PCMU/8000.
a=rtpmap:2 G726-32/8000.
a=rtpmap:4 G723/8000.
a=rtpmap:8 PCMA/8000.
a=rtpmap:18 G729a/8000.
a=rtpmap:96 G726-40/8000.
a=rtpmap:97 G726-24/8000.
a=rtpmap:98 G726-16/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=ptime:30.
a=sendrecv.
a=nortpproxy:yes.
Let me know if this is sufficient or if there is anything else I can
provide. Thanks!
Sincerely,
Brandon Armstead
On Wed, Apr 28, 2010 at 3:54 PM, Daniel-Constantin Mierla <miconda(a)gmail.com
wrote:
Hello,
can you paste here the sip message and the result of the substitution? It
will help to troubleshoot if is something wrong there.
Cheers,
Daniel
On 4/27/10 2:35 AM, Brandon Armstead wrote:
Hello All,
Correction, it seems both the last supplied regex and xlog("L_INFO",
"[$ci] m=audio $(rb{re.subst,/(.*)m=audio ([0-9]+) (.*)/\2/})"); return the
same invalid results.
Thanks again!
Sincerely,
Brandon Armstead
On Mon, Apr 26, 2010 at 7:33 PM, Brandon Armstead <brandon(a)cryy.com>wrote;wrote:
Hello All,
I hate to dig-up this older mailing list entry. However I am some
additional trouble with what I believe is a completely posix-only regex.
xlog("L_INFO", "[$ci] m=audio
$(rb{re.subst,/(.*)m=audio(.*)/\2/})");
I would expect to give me the port from the m=audio line, however it does
not -- it simply removes m=audio.
Any thoughts / ideas / suggestions?
Sincerely,
Brandon Armstead
On Wed, Dec 23, 2009 at 9:31 PM, Iñaki Baz Castillo <ibc(a)aliax.net>wrote;wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
* http://www.asipto.com/
* http://twitter.com/miconda
* http://www.linkedin.com/in/danielconstantinmierla
El Miércoles, 23 de Diciembre de 2009,
Daniel-Constantin Mierla escribió:
the re.subst transformation uses Posix regexp for
matching, only the
format of the command is perl-like. I implemented this because textops
has no dependency of extra libraries than core and I wanted to keep it
so.
Maybe is good to add a pcre.subst transformation in regex module to be
able to use extended regexp formats given by libpcre.
I¡ll try to implement it when I get some spare time :)
--
Iñaki Baz Castillo <ibc(a)aliax.net>
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
30 Apr
30 Apr
9:14 p.m.
Hi Brandon,
you are missing the multi-line matching flag, try:
xlog("L_INFO", "[$ci] $(rb{re.subst,/^(.*)m=audio
([0-9]+)(.*)$/\2/s})")
Note the 's' after the last '/' in subst expression.
Cheers,
Daniel
On 4/29/10 10:21 PM, Brandon Armstead wrote:
Daniel,
Here is the XLOG output, the top log is the unmodified version and the
bottom is the modified version.
xlog("L_INFO", "[$ci] $rb") OUTPUTS:
Apr 29 20:17:23 sip-core02 /sbin/kamailio[23550]:
[6db72a2f-7e263847(a)192.168.1.75
<mailto:6db72a2f-7e263847@192.168.1.75>] v=0#015#012o=- 24986155
24986155 IN IP4 99.21.137.236#015#012s=-#015#012c=IN IP4
174.37.45.134#015#012t=0 0#015#012m=audio 55630 RTP/AVP 0 2 4 8 18 96
97 98 101#015#012a=rtpmap:0 PCMU/8000#015#012a=rtpmap:2
G726-32/8000#015#012a=rtpmap:4 G723/8000#015#012a=rtpmap:8
PCMA/8000#015#012a=rtpmap:18 G729a/8000#015#012a=rtpmap:96
G726-40/8000#015#012a=rtpmap:97 G726-24/8000#015#012a=rtpmap:98
G726-16/8000#015#012a=rtpmap:101
telephone-event/8000#015#012a=fmtp:101
0-15#015#012a=ptime:30#015#012a=sendrecv#015#012a=nortpproxy:yes#015
xlog("L_INFO", "[$ci] $(rb{re.subst,/^(.*)m=audio
([0-9]+)(.*)$/\2/})") OUTPUTS:
Apr 29 20:17:23 sip-core02 /sbin/kamailio[23550]:
[6db72a2f-7e263847(a)192.168.1.75
<mailto:6db72a2f-7e263847@192.168.1.75>] v=0#015#012o=- 24986155
24986155 IN IP4 99.21.137.236#015#012s=-#015#012c=IN IP4
174.37.45.134#015#012t=0 0#015#01255630#012a=rtpmap:0
PCMU/8000#015#012a=rtpmap:2 G726-32/8000#015#012a=rtpmap:4
G723/8000#015#012a=rtpmap:8 PCMA/8000#015#012a=rtpmap:18
G729a/8000#015#012a=rtpmap:96 G726-40/8000#015#012a=rtpmap:97
G726-24/8000#015#012a=rtpmap:98 G726-16/8000#015#012a=rtpmap:101
telephone-event/8000#015#012a=fmtp:101
0-15#015#012a=ptime:30#015#012a=sendrecv#015#012a=nortpproxy:yes#015
As for the actual INVITE / SDP BODY:
v=0.
o=- 24986155 24986155 IN IP4 99.21.XXX.XXX.
s=-.
c=IN IP4 174.37.XX.XXX.
t=0 0.
m=audio 55630 RTP/AVP 0 2 4 8 18 96 97 98 101.
a=rtpmap:0 PCMU/8000.
a=rtpmap:2 G726-32/8000.
a=rtpmap:4 G723/8000.
a=rtpmap:8 PCMA/8000.
a=rtpmap:18 G729a/8000.
a=rtpmap:96 G726-40/8000.
a=rtpmap:97 G726-24/8000.
a=rtpmap:98 G726-16/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=ptime:30.
a=sendrecv.
a=nortpproxy:yes.
Let me know if this is sufficient or if there is anything else I can
provide. Thanks!
Sincerely,
Brandon Armstead
On Wed, Apr 28, 2010 at 3:54 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
can you paste here the sip message and the result of the
substitution? It will help to troubleshoot if is something wrong
there.
Cheers,
Daniel
On 4/27/10 2:35 AM, Brandon Armstead wrote:
--
Daniel-Constantin Mierla
* http://www.asipto.com/
* http://twitter.com/miconda
* http://www.linkedin.com/in/danielconstantinmierla
Hello All,
Correction, it seems both the last supplied regex and
xlog("L_INFO", "[$ci] m=audio $(rb{re.subst,/(.*)m=audio ([0-9]+)
(.*)/\2/})"); return the same invalid results.
Thanks again!
Sincerely,
Brandon Armstead
On Mon, Apr 26, 2010 at 7:33 PM, Brandon Armstead
<brandon(a)cryy.com <mailto:brandon@cryy.com>> wrote:
Hello All,
I hate to dig-up this older mailing list entry. However I
am some additional trouble with what I believe is a
completely posix-only regex.
xlog("L_INFO", "[$ci] m=audio
$(rb{re.subst,/(.*)m=audio(.*)/\2/})");
I would expect to give me the port from the m=audio line,
however it does not -- it simply removes m=audio.
Any thoughts / ideas / suggestions?
Sincerely,
Brandon Armstead
On Wed, Dec 23, 2009 at 9:31 PM, Iñaki Baz Castillo
<ibc(a)aliax.net <mailto:ibc@aliax.net>> wrote:
El Miércoles, 23 de Diciembre de 2009, Daniel-Constantin
Mierla escribió:
-- Daniel-Constantin Mierla * http://www.asipto.com/
*http://twitter.com/miconda
*http://www.linkedin.com/in/danielconstantinmierla
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
the re.subst transformation uses Posix regexp for
matching, only the
format of the command is perl-like. I implemented
this
because textops
has no dependency of extra libraries than core
and I
wanted to keep it so.
Maybe is good to add a pcre.subst transformation in
regex module to
be
able to use extended regexp formats given by
libpcre.
I¡ll try to implement it when I get some spare time :)
--
Iñaki Baz Castillo <ibc(a)aliax.net <mailto:ibc@aliax.net>>
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org <mailto:Users@lists.kamailio.org>
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
9:21 p.m.
On 4/30/10 9:14 PM, Daniel-Constantin Mierla wrote:
Hi Brandon,
you are missing the multi-line matching flag, try:
xlog("L_INFO", "[$ci] $(rb{re.subst,/^(.*)m=audio
([0-9]+)(.*)$/\2/s})")
Note the 's' after the last '/' in subst expression.
those details
were missing in docs, so I updated the core cookbooks for
3.0 and devel:
http://sip-router.org/wiki/cookbooks/transformations/devel#resubst_expressi…
Cheers,
Daniel
On 4/29/10 10:21 PM, Brandon Armstead wrote:
--
Daniel-Constantin Mierla
* http://www.asipto.com/
* http://twitter.com/miconda
* http://www.linkedin.com/in/danielconstantinmierla
Daniel,
Here is the XLOG output, the top log is the unmodified version and
the bottom is the modified version.
xlog("L_INFO", "[$ci] $rb") OUTPUTS:
Apr 29 20:17:23 sip-core02 /sbin/kamailio[23550]:
[6db72a2f-7e263847(a)192.168.1.75
<mailto:6db72a2f-7e263847@192.168.1.75>] v=0#015#012o=- 24986155
24986155 IN IP4 99.21.137.236#015#012s=-#015#012c=IN IP4
174.37.45.134#015#012t=0 0#015#012m=audio 55630 RTP/AVP 0 2 4 8 18 96
97 98 101#015#012a=rtpmap:0 PCMU/8000#015#012a=rtpmap:2
G726-32/8000#015#012a=rtpmap:4 G723/8000#015#012a=rtpmap:8
PCMA/8000#015#012a=rtpmap:18 G729a/8000#015#012a=rtpmap:96
G726-40/8000#015#012a=rtpmap:97 G726-24/8000#015#012a=rtpmap:98
G726-16/8000#015#012a=rtpmap:101
telephone-event/8000#015#012a=fmtp:101
0-15#015#012a=ptime:30#015#012a=sendrecv#015#012a=nortpproxy:yes#015
xlog("L_INFO", "[$ci] $(rb{re.subst,/^(.*)m=audio
([0-9]+)(.*)$/\2/})") OUTPUTS:
Apr 29 20:17:23 sip-core02 /sbin/kamailio[23550]:
[6db72a2f-7e263847(a)192.168.1.75
<mailto:6db72a2f-7e263847@192.168.1.75>] v=0#015#012o=- 24986155
24986155 IN IP4 99.21.137.236#015#012s=-#015#012c=IN IP4
174.37.45.134#015#012t=0 0#015#01255630#012a=rtpmap:0
PCMU/8000#015#012a=rtpmap:2 G726-32/8000#015#012a=rtpmap:4
G723/8000#015#012a=rtpmap:8 PCMA/8000#015#012a=rtpmap:18
G729a/8000#015#012a=rtpmap:96 G726-40/8000#015#012a=rtpmap:97
G726-24/8000#015#012a=rtpmap:98 G726-16/8000#015#012a=rtpmap:101
telephone-event/8000#015#012a=fmtp:101
0-15#015#012a=ptime:30#015#012a=sendrecv#015#012a=nortpproxy:yes#015
As for the actual INVITE / SDP BODY:
v=0.
o=- 24986155 24986155 IN IP4 99.21.XXX.XXX.
s=-.
c=IN IP4 174.37.XX.XXX.
t=0 0.
m=audio 55630 RTP/AVP 0 2 4 8 18 96 97 98 101.
a=rtpmap:0 PCMU/8000.
a=rtpmap:2 G726-32/8000.
a=rtpmap:4 G723/8000.
a=rtpmap:8 PCMA/8000.
a=rtpmap:18 G729a/8000.
a=rtpmap:96 G726-40/8000.
a=rtpmap:97 G726-24/8000.
a=rtpmap:98 G726-16/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=ptime:30.
a=sendrecv.
a=nortpproxy:yes.
Let me know if this is sufficient or if there is anything else I can
provide. Thanks!
Sincerely,
Brandon Armstead
On Wed, Apr 28, 2010 at 3:54 PM, Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
can you paste here the sip message and the result of the
substitution? It will help to troubleshoot if is something wrong
there.
Cheers,
Daniel
On 4/27/10 2:35 AM, Brandon Armstead wrote:
--
Daniel-Constantin Mierla
*http://www.asipto.com/
*http://twitter.com/miconda
*http://www.linkedin.com/in/danielconstantinmierla
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello All,
Correction, it seems both the last supplied regex and
xlog("L_INFO", "[$ci] m=audio $(rb{re.subst,/(.*)m=audio
([0-9]+) (.*)/\2/})"); return the same invalid results.
Thanks again!
Sincerely,
Brandon Armstead
On Mon, Apr 26, 2010 at 7:33 PM, Brandon Armstead
<brandon(a)cryy.com <mailto:brandon@cryy.com>> wrote:
Hello All,
I hate to dig-up this older mailing list entry. However
I am some additional trouble with what I believe is a
completely posix-only regex.
xlog("L_INFO", "[$ci] m=audio
$(rb{re.subst,/(.*)m=audio(.*)/\2/})");
I would expect to give me the port from the m=audio line,
however it does not -- it simply removes m=audio.
Any thoughts / ideas / suggestions?
Sincerely,
Brandon Armstead
On Wed, Dec 23, 2009 at 9:31 PM, Iñaki Baz Castillo
<ibc(a)aliax.net <mailto:ibc@aliax.net>> wrote:
El Miércoles, 23 de Diciembre de 2009, Daniel-Constantin
Mierla escribió:
-- Daniel-Constantin Mierla * http://www.asipto.com/
*http://twitter.com/miconda
*http://www.linkedin.com/in/danielconstantinmierla
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
the re.subst transformation uses Posix regexp for
matching, only the
format of the command is perl-like. I implemented
this
because textops
has no dependency of extra libraries than core
and I
wanted to keep it so.
Maybe is good to add a pcre.subst transformation in
regex module to
be
able to use extended regexp formats given by
libpcre.
I¡ll try to implement it when I get some spare time :)
--
Iñaki Baz Castillo <ibc(a)aliax.net <mailto:ibc@aliax.net>>
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org <mailto:Users@lists.kamailio.org>
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
5115
days inactive
5243
days old
9 comments
4 participants
participants (4)
-
Brandon Armstead -
Brandon Armstead -
Daniel-Constantin Mierla -
Iñaki Baz Castillo