28 Feb
2007
28 Feb
'07
1:50 a.m.
Hi all,
Three new features for sip:wizard, the OpenSER Config Generator, have
been released this week:
- user-aliases: You can now assign aliases to local users. This is
especially useful for mapping numeric numbers to SIP accounts for PSTN
inward dialing.
- cli-pai: This feature allows the provisioning of arbitrary SIP URIs,
which are inserted into a P-Asserted-Identity Header for outgoing calls.
This for example allows the signalling of a numeric CLI to a PSTN
gateway (so it’s the opposite of user-aliases).
- ring-timeout: You can now dynamically set the ring-timeout (or, more
specifically, the fr_inv_timer) per local callee.
Visit http://www.sipwise.com/wizard to give it a try.
Regards,
Andreas
28 Feb
28 Feb
2:11 a.m.
Hi Andreas,
Andreas Granig wrote:
Hi all,
Three new features for sip:wizard, the OpenSER Config Generator, have
been released this week:
- user-aliases: You can now assign aliases to local users. This is
especially useful for mapping numeric numbers to SIP accounts for PSTN
inward dialing.
the aliases are based usrloc or db_aliases module?
- cli-pai: This feature allows the provisioning of arbitrary SIP URIs,
which are inserted into a P-Asserted-Identity Header for outgoing
calls. This for example allows the signalling of a numeric CLI to a
PSTN gateway (so it’s the opposite of user-aliases).
maybe you should have the
option to use RPID or PAI.....
- ring-timeout: You can now dynamically set the ring-timeout (or, more
specifically, the fr_inv_timer) per local callee.
it is only the support, or there
is some script to load the timeout
values from a DB?
Visit http://www.sipwise.com/wizard to give it a try.
nice job ;)
regards,
bogdan
2:20 a.m.
Hi,
They are based on usrloc, an option for db_aliases is planned though.
Right. I just left RPID out for now, since CLIR is handled a bit
different (own privacy header for PAI opposed to header parameter for
RPID). Thus, I left this one out until server-side CLIR is implemented
(which will be next week).
The value is loaded by the usr-preferences feature. The ring-timeout
feauture then uses the AVP.
Regards,
Andreas
-
user-aliases: You can now assign aliases to local users. This is
especially useful for mapping numeric numbers to SIP accounts for PSTN
inward dialing.
the aliases are based usrloc or db_aliases module? - cli-pai:
This feature allows the provisioning of arbitrary SIP URIs,
which are inserted into a P-Asserted-Identity Header for outgoing
calls. This for example allows the signalling of a numeric CLI to a
PSTN gateway (so it’s the opposite of user-aliases).
maybe you should have the
option to use RPID or PAI..... -
ring-timeout: You can now dynamically set the ring-timeout (or, more
specifically, the fr_inv_timer) per local callee.
it is only the support, or there
is some script to load the timeout
values from a DB?
3:21 a.m.
Hi,
Andreas Granig wrote:
They are based on usrloc, an option for db_aliases is planned though. ok - some
people find more convenient to use db_aliases because of
provisioning reasons ;)
Right. I just left RPID out for now, since CLIR is handled a bit
different (own privacy header for PAI opposed to header parameter for
RPID). Thus, I left this one out until server-side CLIR is implemented
(which will be next week). ok :)
The value is loaded by the usr-preferences feature. The ring-timeout
feauture then uses the AVP.
should be better to use "load_credentials" to get rid of an extra db
query?
regards,
bogdan
- user-aliases: You can now assign aliases to local
users. This is
especially useful for mapping numeric numbers to SIP accounts for
PSTN inward dialing.
the aliases are based usrloc or db_aliases module? -
cli-pai: This feature allows the provisioning of arbitrary SIP
URIs, which are inserted into a P-Asserted-Identity Header for
outgoing calls. This for example allows the signalling of a numeric
CLI to a PSTN gateway (so it’s the opposite of user-aliases).
maybe you should
have the option to use RPID or PAI..... -
ring-timeout: You can now dynamically set the ring-timeout (or,
more specifically, the fr_inv_timer) per local callee.
it is only the support, or
there is some script to load the timeout
values from a DB? 
6:03 a.m.
Bogdan-Andrei Iancu wrote:
But ring-timeout is a callee-feature, and I've no idea how to load
uuid-based callee AVPs with less then two queries (first select the
uuid, then call avp_db_load). Caller UUID is fetched using
load_credentials, though.
Cheers,
Andreas
This e-mail is confidential and may well also be legally privileged. If you have received
it in error, you are on notice of its status. Please notify us immediately by reply e-mail
and then delete this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person: to do so could be a breach of
confidence. Thank you for your cooperation.
The value is
loaded by the usr-preferences feature. The ring-timeout
feauture then uses the AVP.
should be better to use "load_credentials" to get rid of an extra db
query?
1 Mar
1 Mar
4:32 a.m.
Hi Andreas,
Andreas Granig wrote:
Bogdan-Andrei Iancu wrote:
But ring-timeout is a callee-feature, and I've no idea how to load
uuid-based callee AVPs with less then two queries (first select the
uuid, then call avp_db_load). Caller UUID is fetched using
load_credentials, though.
actually it is a matter of personal taste ;). I rather
see it as a
caller option - how long are you willing to let the call ringing....
regards,
bogdan
The value
is loaded by the usr-preferences feature. The ring-timeout
feauture then uses the AVP.
should be better to use "load_credentials" to get rid of an extra db
query?
5:31 a.m.
Bogdan-Andrei Iancu wrote:
Well, as caller you can cancel the call whenever you like, so I don't
see a sense in setting a timeout here. On the other hand, as callee you
have the possibility to provision a call-forward-no-answer (which will
come soon ;o) ) after $ringtimeout seconds, e.g. to the voicebox, if you
don't want to pick up the phone.
Cheers,
Andreas
But
ring-timeout is a callee-feature, and I've no idea how to load
uuid-based callee AVPs with less then two queries (first select the
uuid, then call avp_db_load). Caller UUID is fetched using
load_credentials, though.
actually it is a matter of personal taste ;). I rather
see it as a
caller option - how long are you willing to let the call ringing....
6548
days inactive
6549
days old
6 comments
3 participants
participants (3)
-
Andreas Granig -
Andreas Granig -
Bogdan-Andrei Iancu