but wouldnt that then be avoiding the mapping of 0845xxx to 040600 instead, i.e bypassing it, Steve Blair wrote: > >Can your gateway strip digits? If so use translation rules to strip the >prefix from the called party number. > >Iqbal wrote: > >>Hi >> >>I am mapping external numbers to internal ones in a db, eg >>08450040600 maps to 040600 >> >>So when a call comes from pstn to 08450040600 it hits the ip phone >>on 040600, all well and good. >> >>Now what I am testing is deploying asterisk for other features like >>call pickup and all. I have managed to create separate contexts in >>asterisk based on company ID (i.e virtual PBX) assigned from a DB. >> >>And when a call from IP phone A (company id =cid=500) calls out the >>call goes via ser (thats where all IP phones are registered) to >>asterisk, and then out to ser --->pstn (was gonna go out via >>asterisk - pstn, but decided to keep it all within ser). This is >>fine, because asterisk is in the loop. >> >>Now what I need is for inbound calls to that IP phone to also be >>routed into asterisk, and then to ser and to the ipphone, that way >>I pull all calls for each company into a asterisk context for all >>its pbx functionality. >> >>The problem is that when 0845 is called from pstn, I cant setflag >>on it, using is_user_in, since From = pstn dialing number, and To = >>4408450040600, and not 040600, any ideas on what I can match on so >>that I can set the correct flag and divert to asterisk. >> >>Iqbal >> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers > > > > >

Hi I am mapping external numbers to internal ones in a db, eg 08450040600 maps to 040600 So when a call comes from pstn to 08450040600 it hits the ip phone on 040600, all well and good. Now what I am testing is deploying asterisk for other features like call pickup and all. I have managed to create separate contexts in asterisk based on company ID (i.e virtual PBX) assigned from a DB. And when a call from IP phone A (company id =cid=500) calls out the call goes via ser (thats where all IP phones are registered) to asterisk, and then out to ser --->pstn (was gonna go out via asterisk - pstn, but decided to keep it all within ser). This is fine, because asterisk is in the loop. Now what I need is for inbound calls to that IP phone to also be routed into asterisk, and then to ser and to the ipphone, that way I pull all calls for each company into a asterisk context for all its pbx functionality. The problem is that when 0845 is called from pstn, I cant setflag on it, using is_user_in, since From = pstn dialing number, and To = 4408450040600, and not 040600, any ideas on what I can match on so that I can set the correct flag and divert to asterisk. Iqbal _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers