Hello, I am using LCR, for some reason load_gws() function is not finding the gateway in DB, it was working in the start then added some more routes and after that everything stopped working, I am not sure where to start troubleshooting, any idea ?
kamctl lcr show
lcr routes +----+--------+----------+--------+----------+ | id | prefix | from_uri | grp_id | priority | +----+--------+----------+--------+----------+ | 9 | 0 | | 1 | 1 | +----+--------+----------+--------+----------+ lcr gateways +------------+---------------+------+------------+-----------+--------+-------+------+-------+ | gw_name | ip_addr | port | uri_scheme | transport | grp_id | strip | tag | flags | +------------+---------------+------+------------+-----------+--------+-------+------+-------+ | XXXX | XXXX | 5060 | 1 | 1 | 1 | 0 | | 0 | +------------+---------------+------+------------+-----------+--------+-------+------+-------+
my routing script
if(!load_gws()) { xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway "); sl_send_reply("503", "unable to find gateway"); exit; } Thanks in advance.
Asim
Hello,
On 02/19/2009 05:34 PM, Asim Riaz wrote:
Hello, I am using LCR, for some reason load_gws() function is not finding the gateway in DB, it was working in the start then added some more routes and after that everything stopped working, I am not sure where to start troubleshooting, any idea ?
run kamailio with higher debug mode (e.g., debug=5) in configuration file.
You should get more debug messages in the syslog, that may give you some hints. look for lines containing 'lcr'.
Cheers, Daniel
kamctl lcr show
lcr routes +----+--------+----------+--------+----------+ | id | prefix | from_uri | grp_id | priority | +----+--------+----------+--------+----------+ | 9 | 0 | | 1 | 1 | +----+--------+----------+--------+----------+ lcr gateways +------------+---------------+------+------------+-----------+--------+-------+------+-------+ | gw_name | ip_addr | port | uri_scheme | transport | grp_id | strip | tag | flags | +------------+---------------+------+------------+-----------+--------+-------+------+-------+ | XXXX | XXXX | 5060 | 1 | 1 | 1 | 0 | | 0 | +------------+---------------+------+------------+-----------+--------+-------+------+-------+
my routing script
if(!load_gws()) { xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway "); sl_send_reply("503", "unable to find gateway"); exit; }
Thanks in advance.
Asim
Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
On Thu, Feb 19, 2009 at 3:53 PM, Daniel-Constantin Mierla <miconda@gmail.com
wrote:
Hello,
On 02/19/2009 05:34 PM, Asim Riaz wrote:
Hello, I am using LCR, for some reason load_gws() function is not finding the gateway in DB, it was working in the start then added some more routes and after that everything stopped working, I am not sure where to start troubleshooting, any idea ?
run kamailio with higher debug mode (e.g., debug=5) in configuration file.
You should get more debug messages in the syslog, that may give you some hints. look for lines containing 'lcr'.
Cheers, Daniel
Hi Daniel, I tried higher debug level, not getting anything related to LCR all i am getting XLOG messages "unable to find Gateway".
Thanks,
Asim
kamctl lcr show
lcr routes +----+--------+----------+--------+----------+ | id | prefix | from_uri | grp_id | priority | +----+--------+----------+--------+----------+ | 9 | 0 | | 1 | 1 | +----+--------+----------+--------+----------+ lcr gateways
+------------+---------------+------+------------+-----------+--------+-------+------+-------+ | gw_name | ip_addr | port | uri_scheme | transport | grp_id | strip | tag | flags |
+------------+---------------+------+------------+-----------+--------+-------+------+-------+ | XXXX | XXXX | 5060 | 1 | 1 | 1 | 0 | | 0 |
+------------+---------------+------+------------+-----------+--------+-------+------+-------+
my routing script
if(!load_gws()) { xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway "); sl_send_reply("503", "unable to find gateway"); exit; }
Thanks in advance.
Asim
Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
-- Daniel-Constantin Mierla http://www.asipto.com
On 02/19/2009 06:06 PM, Asim Riaz wrote:
On Thu, Feb 19, 2009 at 3:53 PM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
Hello, On 02/19/2009 05:34 PM, Asim Riaz wrote: Hello, I am using LCR, for some reason load_gws() function is not finding the gateway in DB, it was working in the start then added some more routes and after that everything stopped working, I am not sure where to start troubleshooting, any idea ? run kamailio with higher debug mode (e.g., debug=5) in configuration file. You should get more debug messages in the syslog, that may give you some hints. look for lines containing 'lcr'. Cheers, Daniel
Hi Daniel, I tried higher debug level, not getting anything related to LCR all i am getting XLOG messages "unable to find Gateway".
can you check if you have matching LCR rule for your call?
Cheers, Daniel
Thanks,
Asim
kamctl lcr show lcr routes +----+--------+----------+--------+----------+ | id | prefix | from_uri | grp_id | priority | +----+--------+----------+--------+----------+ | 9 | 0 | | 1 | 1 | +----+--------+----------+--------+----------+ lcr gateways +------------+---------------+------+------------+-----------+--------+-------+------+-------+ | gw_name | ip_addr | port | uri_scheme | transport | grp_id | strip | tag | flags | +------------+---------------+------+------------+-----------+--------+-------+------+-------+ | XXXX | XXXX | 5060 | 1 | 1 | 1 | 0 | | 0 | +------------+---------------+------+------------+-----------+--------+-------+------+-------+ my routing script if(!load_gws()) { xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway "); sl_send_reply("503", "unable to find gateway"); exit; } Thanks in advance. Asim ------------------------------------------------------------------------ _______________________________________________ Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org <mailto:Users@lists.kamailio.org> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users -- Daniel-Constantin Mierla http://www.asipto.com
Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
On Thu, Feb 19, 2009 at 4:12 PM, Daniel-Constantin Mierla <miconda@gmail.com
wrote:
On 02/19/2009 06:06 PM, Asim Riaz wrote:
On Thu, Feb 19, 2009 at 3:53 PM, Daniel-Constantin Mierla < miconda@gmail.com mailto:miconda@gmail.com> wrote:
Hello,
On 02/19/2009 05:34 PM, Asim Riaz wrote:
Hello, I am using LCR, for some reason load_gws() function is not finding the gateway in DB, it was working in the start then added some more routes and after that everything stopped working, I am not sure where to start troubleshooting, any idea ?
run kamailio with higher debug mode (e.g., debug=5) in configuration file.
You should get more debug messages in the syslog, that may give you some hints. look for lines containing 'lcr'.
Cheers, Daniel
Hi Daniel, I tried higher debug level, not getting anything related to LCR all i am getting XLOG messages "unable to find Gateway".
can you check if you have matching LCR rule for your call?
Cheers, Daniel
I have only one LCR route entry for now with prefix 0 which is matching the GW with ID 1, as mentioned below and the number I am dialing is starting from 0 so i think it should match my route entry right ?
Thanks,
Asim
Thanks,
Asim
kamctl lcr show lcr routes +----+--------+----------+--------+----------+ | id | prefix | from_uri | grp_id | priority | +----+--------+----------+--------+----------+ | 9 | 0 | | 1 | 1 | +----+--------+----------+--------+----------+ lcr gateways
+------------+---------------+------+------------+-----------+--------+-------+------+-------+ | gw_name | ip_addr | port | uri_scheme | transport | grp_id | strip | tag | flags |
+------------+---------------+------+------------+-----------+--------+-------+------+-------+ | XXXX | XXXX | 5060 | 1 | 1 | 1 | 0 | | 0 |
+------------+---------------+------+------------+-----------+--------+-------+------+-------+
my routing script if(!load_gws()) { xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway "); sl_send_reply("503", "unable to find gateway"); exit; } Thanks in advance. Asim
_______________________________________________ Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org <mailto:Users@lists.kamailio.org> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
-- Daniel-Constantin Mierla http://www.asipto.com
Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
-- Daniel-Constantin Mierla http://www.asipto.com
On Thu, Feb 19, 2009 at 4:21 PM, Asim Riaz ariaz78@gmail.com wrote:
On Thu, Feb 19, 2009 at 4:12 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:
On 02/19/2009 06:06 PM, Asim Riaz wrote:
On Thu, Feb 19, 2009 at 3:53 PM, Daniel-Constantin Mierla < miconda@gmail.com mailto:miconda@gmail.com> wrote:
Hello,
On 02/19/2009 05:34 PM, Asim Riaz wrote:
Hello, I am using LCR, for some reason load_gws() function is not finding the gateway in DB, it was working in the start then added some more routes and after that everything stopped working, I am not sure where to start troubleshooting, any idea ?
run kamailio with higher debug mode (e.g., debug=5) in configuration file.
You should get more debug messages in the syslog, that may give you some hints. look for lines containing 'lcr'.
Cheers, Daniel
Hi Daniel, I tried higher debug level, not getting anything related to LCR all i am getting XLOG messages "unable to find Gateway".
can you check if you have matching LCR rule for your call?
Cheers, Daniel
I have only one LCR route entry for now with prefix 0 which is matching the GW with ID 1, as mentioned below and the number I am dialing is starting from 0 so i think it should match my route entry right ?
lcr routes
here is the output of "kamctl lcr show ", +----+--------+----------+--------+----------+ | id | prefix | from_uri | grp_id | priority | +----+--------+----------+--------+----------+ | 9 | 0 | | 1 | 1 | +----+--------+----------+--------+----------+ lcr gateways
+------------+---------------+------+------------+-----------+--------+-------+------+-------+ | gw_name | ip_addr | port | uri_scheme | transport | grp_id | strip | tag | flags |
+------------+---------------+------+------------+-----------+--------+-------+------+-------+ | XXXX | XXXX | 5060 | 1 | 1 | 1 | 0 | | 0 |
+------------+---------------+------+------------+-----------+--------+-------+------+-------+
Thanks,
Asim
Thanks,
Asim
kamctl lcr show lcr routes +----+--------+----------+--------+----------+ | id | prefix | from_uri | grp_id | priority | +----+--------+----------+--------+----------+ | 9 | 0 | | 1 | 1 | +----+--------+----------+--------+----------+ lcr gateways
+------------+---------------+------+------------+-----------+--------+-------+------+-------+ | gw_name | ip_addr | port | uri_scheme | transport | grp_id | strip | tag | flags |
+------------+---------------+------+------------+-----------+--------+-------+------+-------+ | XXXX | XXXX | 5060 | 1 | 1 | 1 | 0 | | 0 |
+------------+---------------+------+------------+-----------+--------+-------+------+-------+
my routing script if(!load_gws()) { xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway "); sl_send_reply("503", "unable to find gateway"); exit; } Thanks in advance. Asim
_______________________________________________ Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org <mailto:Users@lists.kamailio.org> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
-- Daniel-Constantin Mierla http://www.asipto.com
Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
-- Daniel-Constantin Mierla http://www.asipto.com
Is your R-URI starting with a '0'? You have defined a single route for all '0' prefix destinations.
Regards, Ovidiu Sas
On Thu, Feb 19, 2009 at 11:06 AM, Asim Riaz ariaz78@gmail.com wrote:
On Thu, Feb 19, 2009 at 3:53 PM, Daniel-Constantin Mierla miconda@gmail.com wrote:
Hello,
On 02/19/2009 05:34 PM, Asim Riaz wrote:
Hello, I am using LCR, for some reason load_gws() function is not finding the gateway in DB, it was working in the start then added some more routes and after that everything stopped working, I am not sure where to start troubleshooting, any idea ?
run kamailio with higher debug mode (e.g., debug=5) in configuration file.
You should get more debug messages in the syslog, that may give you some hints. look for lines containing 'lcr'.
Cheers, Daniel
Hi Daniel, I tried higher debug level, not getting anything related to LCR all i am getting XLOG messages "unable to find Gateway".
Thanks,
Asim
kamctl lcr show
lcr routes +----+--------+----------+--------+----------+ | id | prefix | from_uri | grp_id | priority | +----+--------+----------+--------+----------+ | 9 | 0 | | 1 | 1 | +----+--------+----------+--------+----------+ lcr gateways
+------------+---------------+------+------------+-----------+--------+-------+------+-------+ | gw_name | ip_addr | port | uri_scheme | transport | grp_id | strip | tag | flags |
+------------+---------------+------+------------+-----------+--------+-------+------+-------+ | XXXX | XXXX | 5060 | 1 | 1 | 1 | 0 | | 0 |
+------------+---------------+------+------------+-----------+--------+-------+------+-------+
my routing script
if(!load_gws()) { xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway "); sl_send_reply("503", "unable to find gateway"); exit; }
Thanks in advance.
Asim
Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
-- Daniel-Constantin Mierla http://www.asipto.com
Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users