Rafael, Lets say we have 3 clients 2 on the same lan and another on diferent lan Client 1 192.168.3.5 Client 2 192.168.3.6 Client 3 192.168.4.5 The line : avp_printf("i:450", "$dd"); if ( avp_check("i:450", "eq/$src_ip/g") ) I mostly understand this. But I really don’t get the idea on how does the src_ip from client 1 and the src_ip on client 3 will be different they have different networks but what will happened if I use the mask 255.255.0.0 when both clients are on the same network. So my question is: after I record $dd and check to $src_ip what is the “g” for maybe that’s the part I don’t fully understand ?? _____ De: Rafael Risco GV [mailto:rafael.risco@gmail.com] Enviado el: Miércoles, 28 de Diciembre de 2005 11:22 a.m. Para: Fernando Rodriguez CC: users(a)openser.org Asunto: Re: [Users] Src&Dest ip avpops try this: http://openser.org/dokuwiki/doku.php?id=how_to_set_up_nathelper_rtpproxy_whe n_both_sip_ua_s_are_behind_same_nat On 12/28/05, Fernando Rodriguez <frod(a)aitelecom.net> wrote: Hello, Is there a place were i can read about avpops module regarding src and dst ip this is for using mediaproxy when the users are in diferent interfaces of the equipment or diferent networks so i can only mediaproxy the ones that need this functionalyty and the ones on the same network connect direct from one to the other. Thanks a lot Fernando Rodriguez V. _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users