20 Nov
2014
20 Nov
'14
6:23 p.m.
Good evening,
I'm quite new in the Kamailio community so at the beginning I just want to say
"Hello" to everyone.
I have a following problem with SNMP in Kamailio.
I want to collect data from Kamailio by SNMP. I've installed snmpd on the machine
(Linux RHEL) and it's working. I've load snmpstats module in Kamailio and it
starts up without error. I've configured Kamailio to use agentXsocket and enable
agentx in SNMP. Port 705 is opened and netstat shows connection established between
Kamailio and SNMP. Wireshark shows some packets going through. The problem is that there
is no data during snmpwalk from Kamailio. Just standard data from SNMP, nothing from
Kamailio. I've copied Kamailio MIBs to the proper directory, added it in the
snmp.conf. Moreover I've tried to add -m +KAMAILIO-REG-MIB to snmpwalk. Still no data
from Kamailio during snmpwalk.
Any ideas?
Best Regards,
Michal Muszalski
20 Nov
20 Nov
7:29 p.m.
New subject: Session Timers Problem
Our Kamailio statefully forwards requests to our Asterisk cluster.
Sip session timers fail, whether our Asterisk servers are UAS or UAC.
Kamailio receives the re(INVITE), and just dispatches it out using the default algorithm.
I see the record-route header, so I'm not sure what else is missing..
(aside from the last sip packet showing the packet dispatched to a new asterisk peer)
Anybody have some troubleshooting tips for us?
Loose_route should match the transaction based on record-route, is my understanding.
Same thing happens whether carrier re(INVITE)'s or Asterisk does. Just gets dispatched
to the next peer in the list.
U kamailio:5060 -> Carrier:5060
SIP/2.0 200 OK..Via: SIP/2.0/UDP
Carrier:5060;rport=5060;branch=z9hG4bK0cB8c2920fa87e47e82..Record-Route:
<sip:kamailio;lr=on<sip:192.168.9.130;lr=on>>..From:
<sip:From_User@carrier:50
60>;tag=gK0c5010b1..To:
<sip:To_User@kamailio:5060<sip:4704430714@192.168.9.130:5060>>;tag=as7651768b..Call-ID:
638356677_31693090@carrier..CSeq<mailto:638356677_31693090@66.62.60.238..CSeq>:
10795 INVITE..Server: Asterisk PBX 11.2.1..Allow: IN
VITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH..Supported:
replaces, timer..Session-Expires: 1800;refresher=uac..Contact:
<sip:10.10.10.10;redact1=abc
fhCOikg7YDp7YWcOYDg7wWgOnkg3YeGKYWf9Yuphcp**>..Content-Type:
application/sdp..Require: timer..Content-Length: 255....v=0..o=root 1728271566 1728271566
IN IP4 kamailio..s=A
sterisk PBX 11.2.1..c=IN IP4 kamailio..t=0 0..m=audio 61004 RTP/AVP 0 101..a=rtpmap:0
PCMU/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-16..a=ptime:20..a=sendrecv
..a=nortpproxy:yes..
U Carrier:5060 -> kamailio:5060
ACK sip:10.10.10.10;redact1=abcfhCOikg7YDp7YWcOYDg7wWgOnkg3YeGKYWf9Yuphcp**
SIP/2.0..Via: SIP/2.0/UDP Carrier:5060;branch=z9hG4bK0cB8c3710b32c17351f..From:
<sip:From_User
6@Carrier:5060>;tag=gK0c5010b1..To<mailto:6@66.62.60.238:5060%3e;tag=gK0c5010b1..To>:
<sip:To_User@kamailio:5060<sip:4704430714@192.168.9.130:5060>>;tag=as7651768b..Call-ID:
638356677_31693090@carrier..CSeq<mailto:638356677_31693090@66.62.60.238..CSeq>:
10795 ACK..Max-Forwards: 70..Route:
<sip:kamailio:5060;lr=on<sip:192.168.9.130:5060;lr=on>>..Content-Length:
0....
U kamailio:5060 -> Asterisk:5060
ACK sip:1To_User@Asterisk:5060<sip:14704430714@10.1.6.247:5060> SIP/2.0..Via:
SIP/2.0/UDP kamailio;branch=z9hG4bKcydzigwkX..Via: SIP/2.0/UDP
10.10.10.10;redact2=xyzA7CwnD23cQBsv6prYkU3Yk23Ykp3ckcGikA
OYkpzfRN1fRwBYuphcWZAHW4IUMUzURVT.EYSP8SLJgf7UIaOU72GUDcMcuNecDVkcufDYu6E..From:
<sip:From_User@Carrier:5060<sip:13039972016@66.62.60.238:5060>>;tag=gK0c5010b1..To:
<sip:To_User@kamailio:5060<sip:4704430714@192.168.9.130:5060>>;tag
=as7651768b..Call-ID:
638356677_31693090@carrier..CSeq<mailto:638356677_31693090@66.62.60.238..CSeq>:
10795 ACK..Max-Forwards: 69..Content-Length: 0....
U Carrier:5060 -> kamailio:5060
INVITE sip:10.10.10.10;redact1=abcfhCOikg7YDp7YWcOYDg7wWgOnkg3YeGKYWf9Yuphcp**
SIP/2.0..Via: SIP/2.0/UDP Carrier:5060;branch=z9hG4bK0cBb96217452c17351f..From:
<sip:From_User
@Carrier:5060>;tag=gK0c5010b1..To<@Carrier:5060%3e;tag=gK0c5010b1..To>:
<sip:To_User@kamailio:5060<sip:4704430714@192.168.9.130:5060>>;tag=as7651768b..Call-ID:
638356677_31693090@carrier..CSeq<mailto:638356677_31693090@66.62.60.238..CSeq>:
10796 INVITE..Max-Forwards: 70..
Allow:
INVITE,ACK,CANCEL,BYE,REGISTER,REFER,INFO,SUBSCRIBE,NOTIFY,PRACK,UPDATE,OPTIONS..Accept:
application/sdp, application/isup, application/dtmf, application/dtmf-relay, mu
ltipart/mixed..Contact:
<sip:From_User@Carrier:5060<sip:13039972016@66.62.60.238:5060>>..Route:
<sip:kamailio:5060;lr=on<sip:192.168.9.130:5060;lr=on>>..Supported:
timer..Session-Expires: 1800;refresher=uac..Min-SE: 90..Content-L
ength: 234..Content-Disposition: session; handling=required..Content-Type:
application/sdp....v=0..o=Sonus_UAC 3540 9911 IN IP4 carrier..s=SIP Media
Capabilities..c=IN IP
4 Carrier_MGP..t=0 0..m=audio 22406 RTP/AVP 0 100..a=rtpmap:0 PCMU/8000..a=rtpmap:100
telephone-event/8000..a=fmtp:100 0-15..a=sendrecv..a=maxptime:20..
Matt Scott
24 Nov
24 Nov
12:47 p.m.
Hello,
if you start snmp daemon in debug mode, do you see references to
kamailio MIBS?
On some systems, the paths are different, I remember that I had to move
in various locations in order to get the MIBS properly seen.
Cheers,
Daniel
On 20/11/14 17:23, Muszalski Michał - Hurt wrote:
Good evening,
I’m quite new in the Kamailio community so at the beginning I just
want to say “Hello” to everyone.
I have a following problem with SNMP in Kamailio.
I want to collect data from Kamailio by SNMP. I've installed snmpd on
the machine (Linux RHEL) and it's working. I've load snmpstats module
in Kamailio and it starts up without error. I've configured Kamailio
to use agentXsocket and enable agentx in SNMP. Port 705 is opened and
netstat shows connection established between Kamailio and SNMP.
Wireshark shows some packets going through. The problem is that there
is no data during snmpwalk from Kamailio. Just standard data from
SNMP, nothing from Kamailio. I've copied Kamailio MIBs to the proper
directory, added it in the snmp.conf. Moreover I've tried to add -m
+KAMAILIO-REG-MIB to snmpwalk. Still no data from Kamailio during
snmpwalk.
Any ideas?
Best Regards,
Michal Muszalski
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
3653
days inactive
3657
days old
2 comments
3 participants
participants (3)
-
Daniel-Constantin Mierla -
Muszalski Michał - Hurt -
Scott, Matt