16 Aug
2017
16 Aug
'17
7:57 a.m.
Hi,
Is there any possibilities of "on the fly" option in kamailio.cfg.
For Example:
I need to change my carrier IP address in the lcr_gw table, kamailio.cfg
should takes it on the fly. Without restarting the kamailio.
Thanks & Kind Regards,
Logeshwaran G
16 Aug
16 Aug
8:40 a.m.
Hello,
most of the modules that load data from database have the option to
reload at runtime without restart.
LCR has also such option (the command is in example):
-
https://www.kamailio.org/docs/modules/stable/modules/lcr.html#idp49185860
Cheers,
Daniel
On 16.08.17 07:57, Logeshwaran G wrote:
Hi,
Is there any possibilities of "on the fly" option in kamailio.cfg.
For Example:
I need to change my carrier IP address in the lcr_gw table,
kamailio.cfg should takes it on the fly. Without restarting the kamailio.
Thanks & Kind Regards,
Logeshwaran G
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - www.asipto.com
Kamailio World Conference - www.kamailioworld.com
9:35 a.m.
Hello.
You can just change parameter in SQL table and reload changes with kamctl.
Generally, (I think) Kamailio restart is a relatively safe. Established
calls don't need any SIP exchange to continue, and RTP stream flows thru
another program like rtpproxy which is untouched and keeps running when
you restart Kami.
16.08.2017 8:57, Logeshwaran G пишет:
Hi,
Is there any possibilities of "on the fly" option in kamailio.cfg.
For Example:
I need to change my carrier IP address in the lcr_gw table,
kamailio.cfg should takes it on the fly. Without restarting the kamailio.
9:44 a.m.
Sure. Thanks For your Input.
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 1:05 PM, Yu Boot <yu(a)yu-boot.ru> wrote:
Hello.
You can just change parameter in SQL table and reload changes with kamctl.
Generally, (I think) Kamailio restart is a relatively safe. Established
calls don't need any SIP exchange to continue, and RTP stream flows thru
another program like rtpproxy which is untouched and keeps running when you
restart Kami.
16.08.2017 8:57, Logeshwaran G пишет:
Hi,
Is there any possibilities of "on the fly" option in kamailio.cfg.
For Example:
I need to change my carrier IP address in the lcr_gw table, kamailio.cfg
should takes it on the fly. Without restarting the kamailio.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
11:02 a.m.
Is it possible to use the LCR reload command with the xmlrpc module?
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 1:14 PM, Logeshwaran G <logeshwarangs(a)gmail.com>
wrote:
Sure. Thanks For your Input.
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 1:05 PM, Yu Boot <yu(a)yu-boot.ru> wrote:
Hello.
You can just change parameter in SQL table and reload changes with kamctl.
Generally, (I think) Kamailio restart is a relatively safe. Established
calls don't need any SIP exchange to continue, and RTP stream flows thru
another program like rtpproxy which is untouched and keeps running when you
restart Kami.
16.08.2017 8:57, Logeshwaran G пишет:
Hi,
Is there any possibilities of "on the fly" option in kamailio.cfg.
For Example:
I need to change my carrier IP address in the lcr_gw table, kamailio.cfg
should takes it on the fly. Without restarting the kamailio.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
11:28 a.m.
Hi,
On Wed, Aug 16, 2017 at 11:02 AM, Logeshwaran G <logeshwarangs(a)gmail.com> wrote:
Is it possible to use the LCR reload command with the
xmlrpc module?
Of course. You can use xmlrpc or jsonrpc, whichever you prefer. You
need the xhttp module as a dependency though.
Best Regards,
Sebastian
11:44 a.m.
Thanks.
But I am not have the clear cut idea of using the lcr reload command.
I have enabled the jsonrpcs loadmodule ""jsonrpc.so"
params also added modparam("jsonrpcs", "pretty_format", 1),
But Where Should I mention the "kamcmd lcr.reload"
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 2:58 PM, Sebastian Damm <damm(a)sipgate.de> wrote:
Hi,
On Wed, Aug 16, 2017 at 11:02 AM, Logeshwaran G <logeshwarangs(a)gmail.com>
wrote:
Is it possible to use the LCR reload command with
the xmlrpc module?
Of course. You can use xmlrpc or jsonrpc, whichever you prefer. You
need the xhttp module as a dependency though.
Best Regards,
Sebastian
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
11:53 a.m.
Whether I can use the below format:
jsonrpc_exec({"jsonrpc": "2.0", "method":
"lcr.reload", "id": 1}');
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 3:14 PM, Logeshwaran G <logeshwarangs(a)gmail.com>
wrote:
Thanks.
But I am not have the clear cut idea of using the lcr reload command.
I have enabled the jsonrpcs loadmodule ""jsonrpc.so"
params also added modparam("jsonrpcs", "pretty_format", 1),
But Where Should I mention the "kamcmd lcr.reload"
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 2:58 PM, Sebastian Damm <damm(a)sipgate.de> wrote:
Hi,
On Wed, Aug 16, 2017 at 11:02 AM, Logeshwaran G <logeshwarangs(a)gmail.com>
wrote:
Is it possible to use the LCR reload command with
the xmlrpc module?
Of course. You can use xmlrpc or jsonrpc, whichever you prefer. You
need the xhttp module as a dependency though.
Best Regards,
Sebastian
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1:01 p.m.
Unless you want to trigger that after receiving some kind of "SIP
control packet", you would rather add something like this in your
kamailio.cfg:
event_route[xhttp:request] {
if ($hu =~ "^/jsonrpc") {
xlog("L_NOTICE", "Got jsonrpc request, body '$rb'\n");
jsonrpc_dispatch();
} else {
xhttp_reply("500", "Internal Server Error",
"text/html",
"<html><body>Unsupported URL $hu</body></html>");
}
return;
}
Then you would use curl or a script in the language of your choice and
send a request to
http://kamailio_ip:kamailio_tcp_listen_port/jsonrpc
with the json string in the body.
Best Regards,
Sebastian
1:35 p.m.
Thanks for detailed explanation.
Kindly provide me the example json key parameter for lcr.reload.
It will be much helpful
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 4:31 PM, Sebastian Damm <damm(a)sipgate.de> wrote:
Unless you want to trigger that after receiving some
kind of "SIP
control packet", you would rather add something like this in your
kamailio.cfg:
event_route[xhttp:request] {
if ($hu =~ "^/jsonrpc") {
xlog("L_NOTICE", "Got jsonrpc request, body '$rb'\n");
jsonrpc_dispatch();
} else {
xhttp_reply("500", "Internal Server Error",
"text/html",
"<html><body>Unsupported URL
$hu</body></html>");
}
return;
}
Then you would use curl or a script in the language of your choice and
send a request to
http://kamailio_ip:kamailio_tcp_listen_port/jsonrpc
with the json string in the body.
Best Regards,
Sebastian
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1:59 p.m.
I need to pass the json values through HTTP Request, (i.e Invoking through
browser like postman client)
Kindly provide me the json lcr.reload key values.
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 5:05 PM, Logeshwaran G <logeshwarangs(a)gmail.com>
wrote:
Thanks for detailed explanation.
Kindly provide me the example json key parameter for lcr.reload.
It will be much helpful
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 4:31 PM, Sebastian Damm <damm(a)sipgate.de> wrote:
Unless you want to trigger that after receiving
some kind of "SIP
control packet", you would rather add something like this in your
kamailio.cfg:
event_route[xhttp:request] {
if ($hu =~ "^/jsonrpc") {
xlog("L_NOTICE", "Got jsonrpc request, body '$rb'\n");
jsonrpc_dispatch();
} else {
xhttp_reply("500", "Internal Server Error",
"text/html",
"<html><body>Unsupported URL
$hu</body></html>");
}
return;
}
Then you would use curl or a script in the language of your choice and
send a request to
http://kamailio_ip:kamailio_tcp_listen_port/jsonrpc
with the json string in the body.
Best Regards,
Sebastian
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2:41 p.m.
On Wed, Aug 16, 2017 at 1:59 PM, Logeshwaran G <logeshwarangs(a)gmail.com> wrote:
I need to pass the json values through HTTP Request,
(i.e Invoking through
browser like postman client)
Kindly provide me the json lcr.reload key values.
Something like this should work:
curl -X POST --data
'{"id":260,"method":"lcr.reload","jsonrpc":"2.0","params":[]}'
http://$kamailio_ip:$kamailio_port/jsonrpc
BR
Sebastian
17 Aug
17 Aug
9:09 a.m.
I am using the below config :
event_route[xhttp:request] {
if ($hu =~ "^/RPCHIDDEN/") {
//jsonrpc_dispatch();
set_reply_no_connect(); # optional
dispatch_rpc();
} else {
xhttp_reply("403", "OK", "text/html",
"<html><body>Forbidden</body></html>");
}
return;
}
I have enabled :
#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPCHIDDEN/")
#!endif
While executing kamailio.cfg the below error occured:
0(7342) ERROR: <core> [core/cfg.y:3274]: yyparse(): cfg. parser: failed to
find command dispatch_rpc (params 0)
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 6:11 PM, Sebastian Damm <damm(a)sipgate.de> wrote:
On Wed, Aug 16, 2017 at 1:59 PM, Logeshwaran G
<logeshwarangs(a)gmail.com>
wrote:
I need to pass the json values through HTTP
Request, (i.e Invoking
through
browser like postman client)
Kindly provide me the json lcr.reload key values.
Something like this should work:
curl -X POST --data
'{"id":260,"method":"lcr.reload","jsonrpc":"2.0","params":[]}'
http://$kamailio_ip:$kamailio_port/jsonrpc
BR
Sebastian
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
9:13 a.m.
Also If I commented the dispatch_rpc();
Kamailio is running but it dosent accepting the http request.
Please Guide me.
Thanks & Kind Regards,
Logeshwaran G
On Thu, Aug 17, 2017 at 12:39 PM, Logeshwaran G <logeshwarangs(a)gmail.com>
wrote:
I am using the below config :
event_route[xhttp:request] {
if ($hu =~ "^/RPCHIDDEN/") {
//jsonrpc_dispatch();
set_reply_no_connect(); # optional
dispatch_rpc();
} else {
xhttp_reply("403", "OK", "text/html",
"<html><body>Forbidden</body></html>");
}
return;
}
I have enabled :
#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPCHIDDEN/")
#!endif
While executing kamailio.cfg the below error occured:
0(7342) ERROR: <core> [core/cfg.y:3274]: yyparse(): cfg. parser: failed
to find command dispatch_rpc (params 0)
Thanks & Kind Regards,
Logeshwaran G
On Wed, Aug 16, 2017 at 6:11 PM, Sebastian Damm <damm(a)sipgate.de> wrote:
On Wed, Aug 16, 2017 at 1:59 PM, Logeshwaran G
<logeshwarangs(a)gmail.com>
wrote:
I need to pass the json values through HTTP
Request, (i.e Invoking
through
browser like postman client)
Kindly provide me the json lcr.reload key values.
Something like this should work:
curl -X POST --data
'{"id":260,"method":"lcr.reload","jsonrpc":"2.0","params":[]}'
http://$kamailio_ip:$kamailio_port/jsonrpc
BR
Sebastian
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
9:35 a.m.
On Thu, Aug 17, 2017 at 9:13 AM, Logeshwaran G <logeshwarangs(a)gmail.com> wrote:
Also If I commented the dispatch_rpc();
Kamailio is running but it dosent accepting the http request.
Please Guide me.
Actually, it is all documented in the xmlrpc module. My example was
for using jsonrpc, xmlrpc works a bit different.
http://www.kamailio.net/docs/modules/5.0.x/modules/xmlrpc.html
The xmlrpc module doesn't depend on the xhttp module, it works
standalone. You need to specify the route name where xmlrpc requests
will end up. In this route you call dispatch_rpc(), just as example
1.8 shows you: http://www.kamailio.net/docs/modules/5.0.x/modules/xmlrpc.html#idp29963340
BR
Sebastian
9:56 a.m.
Thanks.
Yes I am having the route config as well:
# XMLRPC routing
#!ifdef WITH_XMLRPC
route[XMLRPC] {
# allow XMLRPC from localhost
if ((method=="POST" || method=="GET")
&& (src_ip==127.0.0.1)) {
# close connection only for xmlrpclib user agents (there is
a bug in
# xmlrpclib: it waits for EOF before interpreting the
response).
if ($hdr(User-Agent) =~ "xmlrpclib")
set_reply_close();
set_reply_no_connect();
dispatch_rpc();
exit;
}
send_reply("403", "Forbidden");
exit;
}
#!endif
But I am not sure , where I have missed in the config.
Thanks & Kind Regards,
Logeshwaran G
On Thu, Aug 17, 2017 at 1:05 PM, Sebastian Damm <damm(a)sipgate.de> wrote:
On Thu, Aug 17, 2017 at 9:13 AM, Logeshwaran G
<logeshwarangs(a)gmail.com>
wrote:
Also If I commented the dispatch_rpc();
Kamailio is running but it dosent accepting the http request.
Please Guide me.
Actually, it is all documented in the xmlrpc module. My example was
for using jsonrpc, xmlrpc works a bit different.
http://www.kamailio.net/docs/modules/5.0.x/modules/xmlrpc.html
The xmlrpc module doesn't depend on the xhttp module, it works
standalone. You need to specify the route name where xmlrpc requests
will end up. In this route you call dispatch_rpc(), just as example
1.8 shows you: http://www.kamailio.net/docs/modules/5.0.x/modules/xmlrpc.
html#idp29963340
BR
Sebastian
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
11:20 a.m.
Hi Sebastian,
I have followed your configuration:
event_route[xhttp:request] {
*xlog("ALERT", "Logesh \n");*
if ($hu =~ "^/jsonrpc") {
xlog("L_NOTICE", "Got jsonrpc request, body '$rb'\n");
jsonrpc_dispatch();
} else {
xhttp_reply("500", "Internal Server Error",
"text/html",
"<html><body>Unsupported URL $hu</body></html>");
}
return;
}
and I have added one more log to make sure the http hit is coming in .
I have used the http postman as you have suggested
http://$serverip:$server_port/jsonrpc
'{"id":260,"method":"lcr.reload","jsonrpc":"2.0","params":[]}'
http://$kamailio_ip:$kamailio_port/jsonrpc
Eventhough The Http hit is not coming inside, I am not sure where I need to
correct the mistake.
Please guide me.
Thanks & Kind Regards,
Logeshwaran G
On Thu, Aug 17, 2017 at 1:26 PM, Logeshwaran G <logeshwarangs(a)gmail.com>
wrote:
Thanks.
Yes I am having the route config as well:
# XMLRPC routing
#!ifdef WITH_XMLRPC
route[XMLRPC] {
# allow XMLRPC from localhost
if ((method=="POST" || method=="GET")
&& (src_ip==127.0.0.1)) {
# close connection only for xmlrpclib user agents (there
is a bug in
# xmlrpclib: it waits for EOF before interpreting the
response).
if ($hdr(User-Agent) =~ "xmlrpclib")
set_reply_close();
set_reply_no_connect();
dispatch_rpc();
exit;
}
send_reply("403", "Forbidden");
exit;
}
#!endif
But I am not sure , where I have missed in the config.
Thanks & Kind Regards,
Logeshwaran G
On Thu, Aug 17, 2017 at 1:05 PM, Sebastian Damm <damm(a)sipgate.de> wrote:
On Thu, Aug 17, 2017 at 9:13 AM, Logeshwaran G
<logeshwarangs(a)gmail.com>
wrote:
Also If I commented the dispatch_rpc();
Kamailio is running but it dosent accepting the http request.
Please Guide me.
Actually, it is all documented in the xmlrpc module. My example was
for using jsonrpc, xmlrpc works a bit different.
http://www.kamailio.net/docs/modules/5.0.x/modules/xmlrpc.html
The xmlrpc module doesn't depend on the xhttp module, it works
standalone. You need to specify the route name where xmlrpc requests
will end up. In this route you call dispatch_rpc(), just as example
1.8 shows you: http://www.kamailio.net/docs/m
odules/5.0.x/modules/xmlrpc.html#idp29963340
BR
Sebastian
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
4:32 p.m.
I'm afraid I have no idea what you are doing. You already had the
requests coming to your Kamailio this morning when you tried using
dispatch_rpc() inside your xhttp event route. You posted an error log
line.
I don't know what the "http postman" is and what it does. All I know
is that my example code is coming from a Kamailio in my setup where it
is working.
I guess you need to use tcpdump or ngrep to see what's going on.
Sebastian
18 Aug
18 Aug
12:06 p.m.
I am using postman for http hit.
I am using the below header and body:
application/json
{"jsonrpc": "2.0", "method": "dispatcher.reload",
"id": 1}
Kamailio.cfg started well, but the http hit is not invoking properly?
Thanks & Kind Regards,
Logeshwaran G
On Thu, Aug 17, 2017 at 8:02 PM, Sebastian Damm <damm(a)sipgate.de> wrote:
I'm afraid I have no idea what you are doing. You
already had the
requests coming to your Kamailio this morning when you tried using
dispatch_rpc() inside your xhttp event route. You posted an error log
line.
I don't know what the "http postman" is and what it does. All I know
is that my example code is coming from a Kamailio in my setup where it
is working.
I guess you need to use tcpdump or ngrep to see what's going on.
Sebastian
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2466
days inactive
2468
days old
18 comments
4 participants
participants (4)
-
Daniel-Constantin Mierla -
Logeshwaran G -
Sebastian Damm -
Yu Boot