Hi,
Can any one help me with an example for RPC command sent over http?
My configuration works OK, I get the http request fine. I lack the knowledge of how to send commands.....
For example, how do I send a command to list dialogs (dlg.list)? Or to profile_get_size ?
Http://myserver:myport/http_rpc/dlg/?????????
Thanks, Uri
Hello,
It is indeed a pity that the module documentation doesn't have any examples of how to structure the request URL. So, you're not the only one.
-- Alex
On 03/13/2016 01:38 PM, Uri Shacked wrote:
Hi,
Can any one help me with an example for RPC command sent over http?
My configuration works OK, I get the http request fine. I lack the knowledge of how to send commands.....
For example, how do I send a command to list dialogs (dlg.list)? Or to profile_get_size ?
Http://myserver:myport/http_rpc/dlg/?????????
Thanks, Uri
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
so you complain, too ... but your name is at the top of the documentation file for xhttp_rpc module. I expect you used it as you contributed there already, maybe adding a bit more would help the others, too :-)
Daniel
On 13/03/16 18:44, Alex Balashov wrote:
Hello,
It is indeed a pity that the module documentation doesn't have any examples of how to structure the request URL. So, you're not the only one.
-- Alex
On 03/13/2016 01:38 PM, Uri Shacked wrote:
Hi,
Can any one help me with an example for RPC command sent over http?
My configuration works OK, I get the http request fine. I lack the knowledge of how to send commands.....
For example, how do I send a command to list dialogs (dlg.list)? Or to profile_get_size ?
Http://myserver:myport/http_rpc/dlg/?????????
Thanks, Uri
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Thank Alex, I find great comfort for not being the only one :-)
Actually, after straggling for a while I managed to send the following :
"Http://myerver:myport/http_rpc/dlg/dlg.dlg_end? <h_entry> <h_id>"
The dialog is there but i get 404 "dialog not found" from the module....
Any one??
Hello,
It is indeed a pity that the module documentation doesn't have any examples of how to structure the request URL. So, you're not the only one.
-- Alex
On Sun, Mar 13, 2016 at 7:38 PM, Uri Shacked ushacked@gmail.com wrote:
Hi,
Can any one help me with an example for RPC command sent over http?
My configuration works OK, I get the http request fine. I lack the knowledge of how to send commands.....
For example, how do I send a command to list dialogs (dlg.list)? Or to profile_get_size ?
Http://myserver:myport/http_rpc/dlg/?????????
Thanks, Uri
CC-ing Ovidiu, the author of the module, maybe he can assist here and add a bit to documentation as well...
Cheers, Daniel
On 13/03/16 19:03, Uri Shacked wrote:
Thank Alex, I find great comfort for not being the only one :-) Actually, after straggling for a while I managed to send the following : "Http://myerver:myport/http_rpc/dlg/dlg.dlg_end? <h_entry> <h_id>" The dialog is there but i get 404 "dialog not found" from the module.... Any one?? Hello,
It is indeed a pity that the module documentation doesn't have any examples of how to structure the request URL. So, you're not the only one.
-- Alex
On Sun, Mar 13, 2016 at 7:38 PM, Uri Shacked <ushacked@gmail.com mailto:ushacked@gmail.com> wrote:
Hi, Can any one help me with an example for RPC command sent over http? My configuration works OK, I get the http request fine. I lack the knowledge of how to send commands..... For example, how do I send a command to list dialogs (dlg.list)? Or to profile_get_size ? Http://myserver:myport/http_rpc/dlg/????????? Thanks, Uri
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
The module is not intended to be used in a "scripted" mode. It simply provides a simple web interface with all the available rpc commands. Point a web browser to http://myserver:myport/http_rpc and browse through the available rpc commands. Suggestion on how to make the documentation more clear are welcome :)
-ovidiu
On Mon, Mar 14, 2016 at 6:22 AM, Daniel-Constantin Mierla miconda@gmail.com wrote:
CC-ing Ovidiu, the author of the module, maybe he can assist here and add a bit to documentation as well...
Cheers, Daniel
On 13/03/16 19:03, Uri Shacked wrote:
Thank Alex, I find great comfort for not being the only one :-)
Actually, after straggling for a while I managed to send the following :
"Http://myerver:myport/http_rpc/dlg/dlg.dlg_end? <h_entry> <h_id>"
The dialog is there but i get 404 "dialog not found" from the module....
Any one??
Hello,
It is indeed a pity that the module documentation doesn't have any examples of how to structure the request URL. So, you're not the only one.
-- Alex
On Sun, Mar 13, 2016 at 7:38 PM, Uri Shacked ushacked@gmail.com wrote:
Hi,
Can any one help me with an example for RPC command sent over http?
My configuration works OK, I get the http request fine. I lack the knowledge of how to send commands.....
For example, how do I send a command to list dialogs (dlg.list)? Or to profile_get_size ?
Http://myserver:myport/http_rpc/dlg/?????????
Thanks, Uri
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio World Conference, Berlin, May 18-20, 2016 - http://www.kamailioworld.com
Thanks.
Daniel,
Regarding jsonrpc-s, 2 questions if I may:
1. Is it possible to send multiple requests that are handled simultaneously like sip workers? or are they handled one by one on the listening fifo ?
2. can you send an example of how to use dlg.dlg_end with the relevant dialog params?
BR,
Uri
The module is not intended to be used in a "scripted" mode. It simply provides a simple web interface with all the available rpc commands. Point a web browser to http://myserver:myport/http_rpc and browse through the available rpc commands. Suggestion on how to make the documentation more clear are welcome :)
-ovidiu
On Mon, Mar 14, 2016 at 6:22 AM, Daniel-Constantin Mierla <miconda at gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote:
- CC-ing Ovidiu, the author of the module, maybe he can assist here and add a
*>* bit to documentation as well... *>>* Cheers, *>* Daniel *>>>* On 13/03/16 19:03, Uri Shacked wrote: *>>* Thank Alex, I find great comfort for not being the only one :-) *>>* Actually, after straggling for a while I managed to send the following : *>>* "Http://myerver:myport/http_rpc/dlg/dlg.dlg_end? http://myerver:myport/http_rpc/dlg/dlg.dlg_end? <h_entry> <h_id>" *>>* The dialog is there but i get 404 "dialog not found" from the module.... *>>* Any one?? *>>* Hello, *>>* It is indeed a pity that the module documentation doesn't have any *>* examples of how to structure the request URL. So, you're not the only one. *>>* -- Alex *>>* On Sun, Mar 13, 2016 at 7:38 PM, Uri Shacked <ushacked at gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote: *>>>>* Hi, *>>>>* Can any one help me with an example for RPC command sent over http? *>>>>* My configuration works OK, I get the http request fine. *>>* I lack the knowledge of how to send commands..... *>>>>* For example, how do I send a command to list dialogs (dlg.list)? *>>* Or to profile_get_size ? *>>>>* Http://myserver:myport/http_rpc/dlg/????????? http://myserver:myport/http_rpc/dlg/????????? *>>>>>>* Thanks, *>>* Uri *>>>>>>>>* _______________________________________________ *>* SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list *>* sr-users at lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users *>* http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users *>>>* -- *>* Daniel-Constantin Mierla *>* http://www.asipto.com http://www.asipto.com/ *>* http://twitter.com/#!/miconda http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda http://www.linkedin.com/in/miconda *>* Kamailio World Conference, Berlin, May 18-20, 2016 - *>* http://www.kamailioworld.com http://www.kamailioworld.com/ *
Yes, you can send multiple commands at the same time for jsonrpc over http - TCP workers are used there. It would be good if you listen on a different port for http/rpc commands and set dedicated workers for it.
I am traveling, writing from mobile, so can't give any example right now. But look at jsonrpc command and you should see the format, parameters have to be provided as array, same order as for command line.
Cheers, Daniel On 16 Mar 2016 07:57, "Uri Shacked" ushacked@gmail.com wrote:
Thanks.
Daniel,
Regarding jsonrpc-s, 2 questions if I may:
Is it possible to send multiple requests that are handled simultaneously like sip workers? or are they handled one by one on the listening fifo ?
can you send an example of how to use dlg.dlg_end with the relevant dialog params?
BR,
Uri
The module is not intended to be used in a "scripted" mode. It simply provides a simple web interface with all the available rpc commands. Point a web browser to http://myserver:myport/http_rpc and browse through the available rpc commands. Suggestion on how to make the documentation more clear are welcome :)
-ovidiu
On Mon, Mar 14, 2016 at 6:22 AM, Daniel-Constantin Mierla <miconda at gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote:
- CC-ing Ovidiu, the author of the module, maybe he can assist here and add a
*>* bit to documentation as well... *>>* Cheers, *>* Daniel *>>>* On 13/03/16 19:03, Uri Shacked wrote: *>>* Thank Alex, I find great comfort for not being the only one :-) *>>* Actually, after straggling for a while I managed to send the following : *>>* "Http://myerver:myport/http_rpc/dlg/dlg.dlg_end? http://myerver:myport/http_rpc/dlg/dlg.dlg_end? <h_entry> <h_id>" *>>* The dialog is there but i get 404 "dialog not found" from the module.... *>>* Any one?? *>>* Hello, *>>* It is indeed a pity that the module documentation doesn't have any *>* examples of how to structure the request URL. So, you're not the only one. *>>* -- Alex *>>* On Sun, Mar 13, 2016 at 7:38 PM, Uri Shacked <ushacked at gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote: *>>>>* Hi, *>>>>* Can any one help me with an example for RPC command sent over http? *>>>>* My configuration works OK, I get the http request fine. *>>* I lack the knowledge of how to send commands..... *>>>>* For example, how do I send a command to list dialogs (dlg.list)? *>>* Or to profile_get_size ? *>>>>* Http://myserver:myport/http_rpc/dlg/????????? http://myserver:myport/http_rpc/dlg/????????? *>>>>>>* Thanks, *>>* Uri *>>>>>>>>* _______________________________________________ *>* SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list *>* sr-users at lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users *>* http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users *>>>* -- *>* Daniel-Constantin Mierla *>* http://www.asipto.com http://www.asipto.com/ *>* http://twitter.com/#!/miconda http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda http://www.linkedin.com/in/miconda *>* Kamailio World Conference, Berlin, May 18-20, 2016 - *>* http://www.kamailioworld.com http://www.kamailioworld.com/
-- VoIP Embedded, Inc.http://www.voipembedded.com
On Sun, Mar 13, 2016 at 8:03 PM, Uri Shacked ushacked@gmail.com wrote:
Thank Alex, I find great comfort for not being the only one :-)
Actually, after straggling for a while I managed to send the following :
"Http://myerver:myport/http_rpc/dlg/dlg.dlg_end? <h_entry> <h_id>"
The dialog is there but i get 404 "dialog not found" from the module....
Any one??
Hello,
It is indeed a pity that the module documentation doesn't have any examples of how to structure the request URL. So, you're not the only one.
-- Alex
On Sun, Mar 13, 2016 at 7:38 PM, Uri Shacked ushacked@gmail.com wrote:
Hi,
Can any one help me with an example for RPC command sent over http?
My configuration works OK, I get the http request fine. I lack the knowledge of how to send commands.....
For example, how do I send a command to list dialogs (dlg.list)? Or to profile_get_size ?
Http://myserver:myport/http_rpc/dlg/?????????
Thanks, Uri
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
not using this module here -- so just replying to point to other modules, like jsonrpc-s, where the command is provided in a more standard format. Also, xmlrpc module can be an option. Both of them use http just as transport layer.
Cheers, Daniel
On 13/03/16 18:38, Uri Shacked wrote:
Hi,
Can any one help me with an example for RPC command sent over http?
My configuration works OK, I get the http request fine. I lack the knowledge of how to send commands.....
For example, how do I send a command to list dialogs (dlg.list)? Or to profile_get_size ?
Http://myserver:myport/http_rpc/dlg/?????????
Thanks, Uri
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Thanks !
I looked at the jsonrpc docs.
if it helps anyone, the string to end a dialog is "{"jsonrpc": "2.0", "method": "dlg.end_dlg","params": [<h_entry>,<h_id>], "id": 1}"
Yes, you can send multiple commands at the same time for jsonrpc over http - TCP workers are used there. It would be good if you listen on a different port for http/rpc commands and set dedicated workers for it.
I am traveling, writing from mobile, so can't give any example right now. But look at jsonrpc command and you should see the format, parameters have to be provided as array, same order as for command line.
Cheers, Daniel On 16 Mar 2016 07:57, "Uri Shacked" <ushacked at gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote:
- Thanks.
*>>* Daniel, *>>* Regarding jsonrpc-s, 2 questions if I may: *>>* 1. Is it possible to send multiple requests that are handled simultaneously like sip workers? or are they handled one by one on the listening fifo ? *>>* 2. can you send an example of how to use dlg.dlg_end with the relevant dialog params? *>>* BR, *>>* Uri *>>>* The module is not intended to be used in a "scripted" mode. *>* It simply provides a simple web interface with all the available rpc commands. *>* Point a web browser to http://myserver:myport/http_rpc http://myserver:myport/http_rpc and browse *>* through the available rpc commands. *>* Suggestion on how to make the documentation more clear are welcome :) *>>* -ovidiu *>>* On Mon, Mar 14, 2016 at 6:22 AM, Daniel-Constantin Mierla *>* <miconda at gmail.com http://gmail.com <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> wrote: *>* >* CC-ing Ovidiu, the author of the module, maybe he can assist here and add a *>* *>* bit to documentation as well... *>* *>>* Cheers, *>* *>* Daniel *>* *>>>* On 13/03/16 19:03, Uri Shacked wrote: *>* *>>* Thank Alex, I find great comfort for not being the only one :-) *>* *>>* Actually, after straggling for a while I managed to send the following : *>* *>>* "Http://myerver:myport/http_rpc/dlg/dlg.dlg_end? http://myerver:myport/http_rpc/dlg/dlg.dlg_end? <http://myerver:myport/http_rpc/dlg/dlg.dlg_end? http://myerver:myport/http_rpc/dlg/dlg.dlg_end?> <h_entry> <h_id>" *>* *>>* The dialog is there but i get 404 "dialog not found" from the module.... *>* *>>* Any one?? *>* *>>* Hello, *>* *>>* It is indeed a pity that the module documentation doesn't have any *>* *>* examples of how to structure the request URL. So, you're not the only one. *>* *>>* -- Alex *>* *>>* On Sun, Mar 13, 2016 at 7:38 PM, Uri Shacked <ushacked at gmail.com http://gmail.com <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>> wrote: *>* *>>>>* Hi, *>* *>>>>* Can any one help me with an example for RPC command sent over http? *>* *>>>>* My configuration works OK, I get the http request fine. *>* *>>* I lack the knowledge of how to send commands..... *>* *>>>>* For example, how do I send a command to list dialogs (dlg.list)? *>* *>>* Or to profile_get_size ? *>* *>>>>* Http://myserver:myport/http_rpc/dlg/????????? http://myserver:myport/http_rpc/dlg/????????? <http://myserver:myport/http_rpc/dlg/????????? http://myserver:myport/http_rpc/dlg/?????????> *>* *>>>>>>* Thanks, *>* *>>* Uri *>* *>>>>>>>>* _______________________________________________ *>* *>* SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list *>* *>* sr-users at lists.sip-router.org http://lists.sip-router.org <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> *>* *>* http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> *>* *>>>* -- *>* *>* Daniel-Constantin Mierla *>* *>* http://www.asipto.com http://www.asipto.com/ <http://www.asipto.com/ http://www.asipto.com/> *>* *>* http://twitter.com/#!/miconda http://twitter.com/#!/miconda <http://twitter.com/#!/miconda http://twitter.com/#!/miconda> - http://www.linkedin.com/in/miconda http://www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda http://www.linkedin.com/in/miconda> *>* *>* Kamailio World Conference, Berlin, May 18-20, 2016 - *>* *>* http://www.kamailioworld.com http://www.kamailioworld.com/ <http://www.kamailioworld.com/ http://www.kamailioworld.com/> *>* * *>>>* -- *>* VoIP Embedded, Inc.http://www.voipembedded.com http://www.voipembedded.com/ *>>>* On Sun, Mar 13, 2016 at 8:03 PM, Uri Shacked <ushacked at gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote: *>>>* Thank Alex, I find great comfort for not being the only one :-) *>>>>* Actually, after straggling for a while I managed to send the following : *>>>>* "Http://myerver:myport/http_rpc/dlg/dlg.dlg_end? http://myerver:myport/http_rpc/dlg/dlg.dlg_end? <h_entry> <h_id>" *>>>>* The dialog is there but i get 404 "dialog not found" from the module.... *>>>>* Any one?? *>>>>>>* Hello, *>>>>* It is indeed a pity that the module documentation doesn't have any *>>* examples of how to structure the request URL. So, you're not the only one. *>>>>* -- Alex *>>>>>>* On Sun, Mar 13, 2016 at 7:38 PM, Uri Shacked <ushacked at gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote: *>>>>>* Hi, *>>>>>>* Can any one help me with an example for RPC command sent over http? *>>>>>>* My configuration works OK, I get the http request fine. *>>>* I lack the knowledge of how to send commands..... *>>>>>>* For example, how do I send a command to list dialogs (dlg.list)? *>>>* Or to profile_get_size ? *>>>>>>* Http://myserver:myport/http_rpc/dlg/????????? http://myserver:myport/http_rpc/dlg/????????? *>>>>>>>>>* Thanks, *>>>* Uri *>>>>>>>>>>>>>* _______________________________________________ *>* SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list *>* sr-users at lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users *>* http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users *>
Good it was sorted out and glad to see the docs were useful. Thanks for sharing back the solution, it will help others to solve similar cases.
Cheers, Daniel
On 16/03/16 13:34, Uri Shacked wrote:
Thanks ! I looked at the jsonrpc docs. if it helps anyone, the string to end a dialog is "{"jsonrpc": "2.0", "method": "dlg.end_dlg","params": [<h_entry>,<h_id>], "id": 1}" Yes, you can send multiple commands at the same time for jsonrpc over http
- TCP workers are used there. It would be good if you listen on a different
port for http/rpc commands and set dedicated workers for it.
I am traveling, writing from mobile, so can't give any example right now. But look at jsonrpc command and you should see the format, parameters have to be provided as array, same order as for command line.
Cheers, Daniel On 16 Mar 2016 07:57, "Uri Shacked" <ushacked at gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote:
/Thanks. />//>/Daniel, />//>/Regarding jsonrpc-s, 2 questions if I may: />//>/1. Is it possible to send multiple requests that are handled
simultaneously like sip workers? or are they handled one by one on the listening fifo ? />//>/2. can you send an example of how to use dlg.dlg_end with the relevant dialog params? />//>/BR, />//>/Uri />//>//>/The module is not intended to be used in a "scripted" mode. />/It simply provides a simple web interface with all the available rpc commands. />/Point a web browser to http://myserver:myport/http_rpc and browse />/through the available rpc commands. />/Suggestion on how to make the documentation more clear are welcome :) />//>/-ovidiu />//>/On Mon, Mar 14, 2016 at 6:22 AM, Daniel-Constantin Mierla />/<miconda at gmail.com http://gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote: />/>* CC-ing Ovidiu, the author of the module, maybe he can assist here and add a />/*>* bit to documentation as well... />/*>>* Cheers, />/*>* Daniel />/*>>>* On 13/03/16 19:03, Uri Shacked wrote: />/*>>* Thank Alex, I find great comfort for not being the only one :-) />/*>>* Actually, after straggling for a while I managed to send the following : />/*>>* "Http://myerver:myport/http_rpc/dlg/dlg.dlg_end? http://myerver:myport/http_rpc/dlg/dlg.dlg_end? http://myerver:myport/http_rpc/dlg/dlg.dlg_end? <h_entry> <h_id>" />/*>>* The dialog is there but i get 404 "dialog not found" from the module.... />/*>>* Any one?? />/*>>* Hello, />/*>>* It is indeed a pity that the module documentation doesn't have any />/*>* examples of how to structure the request URL. So, you're not the only one. />/*>>* -- Alex />/*>>* On Sun, Mar 13, 2016 at 7:38 PM, Uri Shacked <ushacked at gmail.com http://gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote: />/*>>>>* Hi, />/*>>>>* Can any one help me with an example for RPC command sent over http? />/*>>>>* My configuration works OK, I get the http request fine. />/*>>* I lack the knowledge of how to send commands..... />/*>>>>* For example, how do I send a command to list dialogs (dlg.list)? />/*>>* Or to profile_get_size ? />/*>>>>* Http://myserver:myport/http_rpc/dlg/????????? http://myserver:myport/http_rpc/dlg/????????? http://myserver:myport/http_rpc/dlg/????????? />/*>>>>>>* Thanks, />/*>>* Uri />/*>>>>>>>>* _______________________________________________ />/*>* SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list />/*>* sr-users at lists.sip-router.org http://lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users />/*>* http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users />/*>>>* -- />/*>* Daniel-Constantin Mierla />/*>* http://www.asipto.com http://www.asipto.com/ http://www.asipto.com/ />/*>* http://twitter.com/#!/miconda http://twitter.com/#%21/miconda <http://twitter.com/#!/miconda http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda http://www.linkedin.com/in/miconda />/*>* Kamailio World Conference, Berlin, May 18-20, 2016 - />/*>* http://www.kamailioworld.com http://www.kamailioworld.com/ http://www.kamailioworld.com/ />/* />//>//>/-- />/VoIP Embedded, Inc.http://www.voipembedded.com http://www.voipembedded.com/ />//>//>/On Sun, Mar 13, 2016 at 8:03 PM, Uri Shacked <ushacked at gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote: />//>>/Thank Alex, I find great comfort for not being the only one :-) />>//>>/Actually, after straggling for a while I managed to send the following : />>//>>/"Http://myerver:myport/http_rpc/dlg/dlg.dlg_end? http://myerver:myport/http_rpc/dlg/dlg.dlg_end? <h_entry> <h_id>" />>//>>/The dialog is there but i get 404 "dialog not found" from the module.... />>//>>/Any one?? />>//>>//>>/Hello, />>//>>/It is indeed a pity that the module documentation doesn't have any />>/examples of how to structure the request URL. So, you're not the only one. />>//>>/-- Alex />>//>>//>>/On Sun, Mar 13, 2016 at 7:38 PM, Uri Shacked <ushacked at gmail.com http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users> wrote: />>//>>>/Hi, />>>//>>>/Can any one help me with an example for RPC command sent over http? />>>//>>>/My configuration works OK, I get the http request fine. />>>/I lack the knowledge of how to send commands..... />>>//>>>/For example, how do I send a command to list dialogs (dlg.list)? />>>/Or to profile_get_size ? />>>//>>>/Http://myserver:myport/http_rpc/dlg/????????? http://myserver:myport/http_rpc/dlg/????????? />>>//>>>//>>>/Thanks, />>>/Uri />>>//>>>//>>>//>>//>//>/_______________________________________________ />/SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list />/sr-users at lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users />/http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users />
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Alex Balashov -
Daniel-Constantin Mierla -
Ovidiu Sas -
Uri Shacked