Hello users
The below is my lcr logic . When the first gateway is failed and second gateway of lcr, has to ruoute the pstn gateway. but, it say the 400 Bad request,
route[4] { load_gws(); next_gws(); t_on_failure("2"); route(2) ; } route[2] { t_relay(); exit; }
fialure_route[2] { next_gws(); t_on_failure("2"); route(2); }
Hello guys,
This problem is resolved myself . The openser -1.2.0 is having bugs in lcr module , mainly the function " next_gw() " in failure route it won't append the headers ... Then i update the 1.2.1 , now its working.
On 6/18/07, raviprakash sunkara sunkara.raviprakash.feb14@gmail.com wrote:
Hello users
The below is my lcr logic . When the first gateway is failed and second gateway of lcr, has to ruoute the pstn gateway. but, it say the 400 Bad request,
route[4] { load_gws(); next_gws(); t_on_failure("2"); route(2) ; } route[2] { t_relay(); exit; }
fialure_route[2] { next_gws(); t_on_failure("2"); route(2); } -- Thanks &Regards Ravi Prakash Sunkara
raviprakash sunkara writes:
The below is my lcr logic . When the first gateway is failed and second gateway of lcr, has to ruoute the pstn gateway. but, it say the 400 Bad request,
if your gw claims 400 bad request, try to find out why. use wireshark to capture the invite and check if there is something wrong with it.
-- juha
-
jh＠tutpro.com -
raviprakash sunkara