Thanks a LOT!!!

I have solved it!!

if (t_check_status("487|486")) { rewritehostport("200.xx.xx.xx:5060"); append_branch(); xlog("L_INFO","---> To Voicemail...\n"); setflag(10); route(1); <---------- t_relay(); exit;

That was the problem.

2009/9/24 Daniel-Constantin Mierla miconda@gmail.com:

Hello,

On 23.09.2009 17:58 Uhr, Tincho ylm wrote:

...

Hi all!

I'm trying to make a realtime environment openser-asterisk. At this moment, everything is working fine but I have problems with VM feature. What I'm doing is:

A call B If B is busy and returns 486 Openser send this to Asterisk.

failure_route[1] {        if(!t_was_cancelled()) {                if (t_check_status("487|486")) {                        rewritehostport("200.xx.xx.xx:5060");                        append_branch();                        xlog("L_INFO","---> To Voicemail...\n");                        setflag(10);                        route(1);                        exit;                }                if (isbflagset(6) || isflagset(5)) {                        unforce_rtp_proxy();                }        } }

Asterisk cant handle it because this error:

chan_sip.c:5121 process_sdp: Unable to lookup host in c= line, 'IN IP4 200.xx.xx.xx200.xx.xx.xx' chan_sip.c:5121 process_sdp: Unable to lookup host in c= line, 'IN IP4 200.xx.xx.xx200.xx.xx.xx' chan_sip.c:5121 process_sdp: Unable to lookup host in c= line, 'IN IP4 200.xx.xx.xx200.xx.xx.xx'

I'm using: Kamailio 1.4.4 Rtpproxy Asterisk 1.4.22

Is it a rtpproxy issue? it can fix it?

If I make a ethereal capture, I can see in the MESSAGE BODY this:

connection inrfomation (c): IN IP4 200.xx.xx.xx200.xx.xx.xx

What can I do?

you have a problem in your config file -- you call twice force_rtp_proxy(0. Check the logic, probably from failure route you go again through another route where force_rtp_proxy() is executed -- you must avoid the second call of it.

Cheers, Daniel

-- Daniel-Constantin Mierla

• http://www.asipto.com/